ossora T86DVR 10.26 Inch Smart Screen Player

Product Information

The T86DVR 10.26 Inch Smart Screen Player is a device that uses two wide-angle cameras installed inside and outside the vehicle to capture images of the surrounding area and transmit them to the integrated device in real time. This system allows the driver to
have a clear view of obstacles and pedestrians around the vehicle, reducing the occurrence of accidents such as scraping, collision, collapse, and fraud. The product features a 10.26-inch FHD display (1600*600), 2-channel camera interface, touch control, Bluetooth,
Wi-Fi, FM Transmitter, SD card recording, and Type C interface power supply.

Product Usage Instructions

1. Installation: Install the T86DVR 10.26 Inch Smart Screen Player in your vehicle according to the provided instructions.
2. Power Connection: Connect the Type C power cord to the device and plug it into a power source with a voltage range of 7V to 32V.
3. Camera Setup: Connect the wide-angle cameras to the device using the camera extension cord.
4. Display and Control: Use the touch control interface on the 10.26-inch FHD display to navigate through the menu options and settings.
5. Video Recording: By default, the device will start recording videos automatically upon booting up. The videos are saved in 2.5K H.264 format with two separate channels.
6. Playback and Viewing: Use the native playback feature to view recorded videos on the device’s screen. You can also insert an optional SD card (minimum 32GB, maximum 256GB) for additional video storage.
7. Reverse Display: The device automatically switches to rear view mode when reversing the vehicle. Adjust the reversing line according to your vehicle model.
8. Connectivity Features: The device supports Wi-Fi, Apple CarPlay, and Android Auto for seamless connectivity. It also has Bluetooth for music playback and an FM Transmitter to connect to your car radio.
9. Audio Recording: The device supports microphone recording. You can adjust the microphone settings in the menu.
10. Voice Control: Use voice control to navigate through the menu options. You can enable or disable this feature in the menu settings.
11. Power Protection: The device has power protection circuits, including surge protection and anti-reverse connection protection, to ensure safe and reliable operation.

Product overview

The T86DVR 10.26 uses two wide-angle cameras installed inside and outside the vehicle to capture images of the surrounding area and transmit them to the integrated device in real time. With the help of this system, the driver can see the obstacles and pedestrians around the vehicle intuitively, and effectively reduce the occurrence of scraping, collision, collapse and other accidents. This product can record all driving pictures to avoid accident fraud.

Product composition list

Product description

Project	Function introduction	Performance indicators
System	Language	Simplified Chinese / Traditional Chinese / English / Russian / Spanish / French / Germa / Japanese / Korean / Arabic / Italian / Portuguese
	Interface	Graphical menu operation
	Mode of operation	Touch
Video input	Video input	2 channels FHD video input
	Video mode	Default boot recording, no missing seconds
	The video format	2.5K H.264 video, 2 channels of video saved separately
Video display	Real-time display	10.26-inch HIGH-DEFINITION IPS screen, 1600 x 600
	The native playback	Local play, anytime to view
	The screen saver	Screen savers can be set to: off / 10 seconds / 30 seconds / 1 minute
Reverse display	Reverse display	Automatically switches to the rear view
	Astern line adjustment	Adjust the reversing line for various models

Smart + connected	Wi-Fi	Supports Apple CarPlay and Android Auto
	Bluetooth	Support Bluetooth music playback
	FM	FM Transmitter support, connected to the car radio
The video store	SD card	CLASS10 U1 : 32GB minimum and 256GB maximum
Audio part	The microphone	Support microphone recording, menu can be set to turn off
	Voice control	Support voice control, menu can be set to turn off
Power part	The power input	The step-down line supports 7-32V wide voltage and has power protection circuits such as vehicle specification level surge protection and anti reverse connection protection.
Power consumption	Two-way video	Less than 10W (screen display, 2-channel camera recording)
Other	Working temperature	-4 ~149 ℉
	The video time	Video recording duration can be set
	camera mirroring	The camera supports mirror display, and the menu can be set

SD card specifications

The quality of SD card has a great impact on the stability of video recording. To record video safely, use SD cards from major brands such as SanDisk, Kingston, Toshiba, and Samsung. Speed certification must be at least Class10.

Wiring instructions

The details are as follows:

Port	Instructions
Type C interface	Monitor power supply interface
Cigarette charger	The cigarette lighter takes power directly Note: The product comes with a cigarette charger as standard. If you do not use our original charger, you need to buy a compliant high-quality cigarette charger, otherwise it is easy to damage the machine or cause other injuries due to insufficient voltage and heat.and FM Transmitter function cannot work normally.

Camera installation

Locate the drilling hole, find the appropriate installation position in the license plate attachment, mark it with a pen and then drill the appropriate size of the screw hole. Fix the camera to the rear of the car with screws, the reversing trigger wire (red thin wire) needs to be connected to the positive pole of the reversing light, and finally use the camera extension cable to connect to the monitor.
（This is not necessary if you choose the version without the reversing camera.）

Interface specification

1. Time and date: display the current time and date
2. Home button: click to return to home page
3. Brightness key: click to adjust the screen brightness
4. Volume key: click to adjust the volume
5. Setting button: click to jump to the setting interface
   
6. Apple CarPlay: Special connector for iPhone
7. Android Auto: Special connector for Android mobile phone
8. Dvr: Click to enter the video recording interface
9. Playback: Tap to view a video on the video screen
10. Audio output: click to select the sound playing mode

A. Apple CarPlay

As shown in the figure, click the [Apple CarPlay] button to enter Apple CarPlay. First turn on Wi Fi and Bluetooth of the phone, and then select the [Apple CarPlay] option as shown in the figure below. Bluetooth will automatically turn on, and the name is T86-XXXX. Connect Bluetooth to your phone to open the application. When the machine is powered on, it will attempt to automatically connect to the last connected phone.

(Turn off your phone’s Wi-Fi to disconnect, Apple CarPlay option only supports iPhone phones, Android phone please select [Android auto] option)

Note: In the drop-down menu of the mobile phone, you need to click to turn off Bluetooth first, and then click the Turn off WiFi button to disconnect. Just turn off the WiFi button alone, and the car will keep trying to reconnect.

B. Android Auto

As shown in the figure, click the [Android Auto] button to enter Android Auto. First turn on Wi Fi and Bluetooth of the phone, and then select the [Android auto] option as shown in the figure below. Bluetooth will automatically turn on. The name of Bluetooth is T86-XXXXX. Connect Bluetooth to your phone to open the application. When the machine is powered on, it will attempt to automatically connect to the last connected phone.(Turn off your phone’s Wi-Fi to disconnect)

C. Bluetooth Music

You can find Bluetooth music by clicking the Apple CarPlay or Android Auto button. First turn on the Bluetooth of the phone, and then select the [Bluetooth Music] option. The Bluetooth will automatically turn on. The Bluetooth name is T86-XXXXX. Connect Bluetooth to your phone and start playing music.

The buttons correspond to Last, Play / Pause and Next, respectively.

• Click on the Lyrics button [] to display the lyrics.
• Click the [] button to enter the Dvr screen.
• (Some mobile music player apps do not support displaying lyrics)

D. Dvr

As shown in the picture above, the main page will not display the camera image, you need to click the Dvr button to view the camera image. When a card is inserted, the system automatically enters the video mode, and when recorded, the small red dots in the [Driving Monitoring] button will flash.

E. Playback

As shown above, click the [Playback] button to enter the video playback interface.

You can click any to play back the video and play the video on the right.

• [Front] cyclic video shot by the front camera.
• [Rear] a circular video shot by the rear camera.
• [Lock] Click the video saved after locking.
• [Photos] Click to view the pictures taken by the one-click photo function.
• Click the [Delete] button to delete the material.

F. Audio output

As shown in the figure above, click the [Audio Output] button to enter the audio output selection interface.

1. [Speaker]: The sound will be played from the speaker of the device.

   

2. [Bluetooth]: After selecting this mode, the Bluetooth transmission mode will be turned on by default. After the original vehicle’s Bluetooth is turned on, click the Scan [ ] button, and the name of the original vehicle’s Bluetooth will appear in the available devices on the right. After the connection is successful, all the sounds of the device will be transmitted to the original car speakers through Bluetooth transmission.
   After selecting this mode, the volume icon will change to the Bluetooth transmission icon [], and the volume cannot be adjusted on this device, so it must be adjusted on the original vehicle.

   

3. [FM]: After selecting this mode, FM transmission mode will be turned on by default. For example, if the FM transmitting frequency band of this equipment is adjusted to FM 106.0 MHz (any unoccupied channel can be used), the car radio will also adjust the receiving frequency band to the same FM 106.0 MHz. After successful connection, all sounds of the equipment will be transmitted to the original vehicle horn through FM transmission.
   After selecting this mode, the volume icon will change to FM emission icon [ ], and the volume cannot be adjusted on this device, so it must be adjusted on the original vehicle.
   （Not using the original power cord will cause the FM Transmitter signal to deteriorate or the function cannot be used.）

   
4. [AUX]: After selecting this mode, the AUX output mode will be turned on by default. Connect the equipment to the original vehicle with an AUX sound source cable. After the connection is successful, all the sounds of the equipment will be transmitted to the original vehicle speakers through the AUX sound source cable for playback.
   After selecting this mode, the volume icon will change to AUX output icon [ ], and the volume cannot be adjusted on this device, so it must be adjusted on the original vehicle.

G. Setting

As shown in the figure, click the [ ] button in the lower left corner to enter thesetting interface.

Reverse Line Calibration

Click [Reverse Line Calibration] to enter the settings:

Park the car in the middle of the parking space, manually drag [ ], adjust the position of the reversing auxiliary line up, down, left and right, so that the reversing auxiliary line and the parking line are level with the ground.
After adjusting the reversing line, click [confirm] to confirm.
usting the reversing line, click [confirm] to confirm.

Time lapse video

• In the settings, click the “time lapse video” option, you can choose “off”, “12 hours”, “24 hours” (default off). After selecting the monitoring time for 12 hours or 24 hours, when the car is turned off (ACC is disconnected), the system will turn off the screen after a five-second countdown to reduce power consumption and enter monitoring.
• The system cannot do anything at this point unless the car is re-ignitioned (ACC powered). Manually touch the screen to light up the screen display, the system will prompt “parking monitoring, shut down later”.
• In the settings, if the “time-lapse video” function is selected to “off”, after the car is turned off (ACC is disconnected), the system will enter the normal shutdown process, and will not enter the parking monitoring function;
• “Time-lapse video” is continuous shooting at the speed of one frame per second, taking up very little space. But then it will play at 30 frames per second, so there will be a 30 times faster visual effect.
• Note: And this function needs to be connected to a normal power supply in order to use it normally!

Troubleshooting

Product parameters

Documents / Resources

ossora T86DVR 10.26 Inch Smart Screen Player [pdf] User Manual T86DVR 10.26 Inch Smart Screen Player, T86DVR, 10.26 Inch Smart Screen Player, Smart Screen Player, Screen Player, Player

References

• User Manual