OSDFONO R1 Bathroom Speaker
Specification
- BRAND: OSDFONO
- SPEAKER TYPE: Surround Sound, Outdoor
- CONNECTIVITY TECHNOLOGY: Bluetooth
- RECOMMENDED USES FOR PRODUCT: For Music Players
- WATERPROOF RATING: IPX7
- BLUETOOTH:0
- PLAYTIME: 15H
- BATTERY: 1200mAh
- COMPATIBILITY: smartphones, tablets, and PC
- BATTERIES: 1 Lithium Ion batteries required
Introduction
The 0.6-pound portable Bluetooth speaker is so small that it fits in your hand. A strong silicone lanyard is included with the outdoor wireless speaker, allowing you to hang it from just about anything you can think of, including a bike, tree, railing, backpack, or tree. You may listen to your favorite music anywhere with a portable Bluetooth speaker, adding color to your travel experience. With 10W dual audio drivers and a high-fidelity sound system, the bathroom speaker produces bass that is deeper, richer, and more powerful, as well as middle that is detailed, and treble that is clear. gives you a fully immersive listening experience. Using the TWS dual pairing capability, you can couple two wireless speakers together to provide 360° surround stereo, giving you an audio experience that is really unmatched.
The Bluetooth speakers are dustproof, splashproof, and IPX7 certified water resistant. Ideal for the bathroom, car, office, beach, pool, boat, hiking, camping, and more. No more concerns about getting wet or the rain! You may listen to your favorite music wherever you are with our shower speaker. Uses a Bluetooth 5.0 chip to guarantee speedier transmission, more potent anti-interference defenses, and a constant signal. greater compatibility with all Bluetooth devices, including PCs, tablets, and smartphones. Even in challenging circumstances, a wireless speaker can typically connect the device from 66 unobstructed feet away and the signal is unaffected.
By the way, we designed an SD slot so that you may take your micro SD card with you. Portable Bluetooth speakers from Altavoz have a built-in 1200mAh lithium battery that is rechargeable. 15 hours of music playback from a portable speaker is simply enough to cover all of your everyday needs. You may easily hang the wireless speaker on a backpack, bicycle, cart, bathroom, and other places with the help of a portable rope. It’s portable, making it ideal for travel, sports, and other indoor and outdoor activities.
WHAT’S IN THE BOX
- Bluetooth speaker x1
- Portable lanyard(Fixed on the speaker) x1
- Type-C charging cable(Adapter not included) x1
- User manual x1
HOW TO CONNECT 2 SPEAKERS TOGETHER
- SET UP THE TWS SYSTEM Make sure no devices are connected to either of the two R1 speakers as you turn them on. A beep sound will be heard if you double-press the “play/pause” button on one speaker to signal pairing. An additional beep signal will be heard once pairing is complete.
- PAIR TWO TWS SPEAKERS WITH A BLUETOTH DEVICE In the Bluetooth device’s settings menu, choose R1 for the channel. If the connection is successful, a sound will be heard, and the LED will continue to glow.
- STOP THE TWS To disconnect one speaker from the other, press the “play/pause” buttons on both of them twice.
HOW TO CONNECT TO THE DEVICE
Press the play/pause button twice to enter pairing mode. Turn on the Bluetooth of your device and search for “R1”. Tap pair to connect.
HOW TO CHARGE
Connect one end of the USB charging cable to your computer/power bank or a mobile phone charger. Connect the micro-USB to the speaker. Plug the mobile phone charger into a wall socket. LED light flashes indicating that the speaker is charging.
FAQs
The most recent device connected will be automatically connected.
Yes, you can use this portable speaker in the restroom. Light drops of water are acceptable for this Bluetooth speaker because it is IPX7-rated, making it resistant to splashes, rain, and light spray. However, do not submerge it in water.
To reset (restart) the speaker, press and hold the (power) button for around 10 seconds.
If your Bluetooth devices aren’t connecting, they probably aren’t in pairing mode or are out of range.
The power and Bluetooth buttons must be pressed and held simultaneously in order for almost every Bluetooth speaker to be reset.
Ensure that your iOS or iPadOS device and Bluetooth accessories are in close proximity to one another. Restart your Bluetooth device after turning it off. Make sure your Bluetooth device is turned on and fully charged or connected to power.
An unpleasant buzzing or scraping sound, either by itself or roughly at the pitch of the note the speaker is attempting to play, is the most typical audible sign of a blown speaker. Or there can be absolutely no sound.
This resets your speaker to its factory default settings and clears all settings. Turn on the speaker.
Yes. Without Wi-Fi, Bluetooth can be used. In actuality, Bluetooth can be set up and utilized without any kind of internet connection.
The majority of malfunctions are electrical faults brought on by overpowering the voice coil of the speaker. Burned voice coils are the result of constant overpowering. The only solution for this is to turn down the treble/bass boost settings, treble/gain controls, or amplifier gain controls, or to stop pushing your audio system so hard.
Restart your Android device and look for updates if the loudspeaker isn’t working. Reset the sound preferences and turn off Bluetooth and Do Not Disturb.
Check the ohms between the positive and negative speaker lines with a multimeter.
Yes, you can overcharge it because it will stop charging when the battery is at 100%.
Go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile, & Bluetooth on Android devices. For iOS and iPadOS devices, you’ll need to unpair every device first, then restart your phone or tablet by going to Settings > Bluetooth, selecting the info icon, then selecting Forget This Device for each device.
Fortunately, speakers have a pretty straightforward design and are simple to repair. For certain repairs, this article also makes reference to other Fix-It Guides.
