Orion Side Table Instructions
ORION SIDE TABLE Assembly Instructions
COMPONENT CHECKLIST
FITTINGS
Ruler – Use this ruler to help correctly identify the screws.
IMPORTANT: Read these instructions carefully before attempting to assemble. Retain these instructions for future reference.
Step 1
Note: All bolts tighten 80%
Step 2
Note: All bolts tighten 80%
Step 3
Note: All bolts tighten 80%
Step 4
Step 5
Step 6
Note: All bolts tighten 100%.
Health and safety
- Assemble on a soft level surface to avoid damaging the unit or your floor.
- This product should not be used if any parts are missing or broken.
- All fixings should be checked and tightened before use and periodically tightened.
- Do not strike with a sharp implement.
- Do not allow product to become wet.
- Always use on a level and even surface.
- To ensure an easier assembly, we strongly advise that all fittings are only finger tightened during initial assembly. Only upon completion of the assembly should all fixing points be fully tightened.
How do I care for the Orion side table
- Wipe clean with a moist cloth
- Do not use abrasive cleaners.
Product Assistance Line: if you require any advice about this product or require any missing fixings, Please call 0800 083 35 73 between 9.00am and 5.30pm, Monday to Friday. If you are missing any of the components from the components list please contact JD Williams directly on 0871 231 2000.
CAPTON:O3.1X9K8602
Documents / Resources
 |
ORION Orion Side Table [pdf] Instructions Orion Side Table |
