oraimo-LOGO

oraimo OSW-18N Smart Watch

oraimo-OSW-18N-Smart-Watch-PRO

Product Overview

oraimo-OSW-18N-Smart-Watch- (1)

Basic Product Specifications

  • Display Screen 1.57” TFT 200*320
  • BT Version V5.1
  • Battery Capacity 175mAh
  • Battery Type Lithium polymer battery
  • Normal Use Time 5-7 days
  • Watch Size 253* 30.3* 10.9mm
  • Weight 40.6g *Including the weight of the watch strap
  • Material Zinc Alloy/PC/ABS
  • Waterproof IP68

Setting Up Your Smart Watch
For the best experience we recommend using the Joywear 2 App for iOS and Android.oraimo-OSW-18N-Smart-Watch- (2)

Setting Up The Watch On Your Phone

To Get Started 

  1. Find the Joywear 2 App in one of these locations, depending on your device:oraimo-OSW-18N-Smart-Watch- (3)
  2. Install the App. Note that if you don’t have an account with the store you’ll be required to create one before you can download the App.
  3. When the App is installed, open it and be guided through a series of questions that help you create your account, or login to your existing account.
  4. Continue following the onscreen instructions to connect, or pair the product to your phone or tablet.oraimo-OSW-18N-Smart-Watch- (4)
  • Your account asks for information such as height, weight, and gender to make various calculations such as stride lengths to estimate distance and basal metabolic rate to estimate calorie burn. You can modify your information in Joywear 2-Profile-Me.
  • When you’re done pairing, read through the guide about this product and then explore the dashboard.oraimo-OSW-18N-Smart-Watch- (5)oraimo-OSW-18N-Smart-Watch- (6)

Getting To Know Your Smart Watch 

  • Wrist Placementoraimo-OSW-18N-Smart-Watch- (7)
    For all-day wear, your watch should usually rest a finger’s width below your wrist bone and lay flat, as you would normally wear a watch.
  • Charge Your Watchoraimo-OSW-18N-Smart-Watch- (8)
    Connect the metal contacts on the charging dock to those on the back of the device, then put them on a flat surface
  • Connect the charging cradle to a power supply, the device’s screen will light up and display the battery level.oraimo-OSW-18N-Smart-Watch- (9)

The charging dock is not water resistant. Wipe the port, metal contacts, and the device dry before charging.

Controls

Side Button oraimo-OSW-18N-Smart-Watch- (12)

  1. Wake the screenoraimo-OSW-18N-Smart-Watch- (10)Return to the home screen
  2. Power on/off the watchoraimo-OSW-18N-Smart-Watch- (11)

Full Touch Screen 

oraimo-OSW-18N-Smart-Watch- (13)

  1. Hold the home screen to change the watch face
  2. Swipe to go different interfaces
  3. Tap to enter the function
  4. Swipe the screen to the right to return to the previous interface

oraimo-OSW-18N-Smart-Watch- (14)

Troubleshooting

Can’t connect with BT.

  1. Make sure your device supports BT 5.1. Make sure your device’s software is or above iOS 9.0 or Android 4.4.
  2. Restart BT and reconnect after 20 seconds.
  3. Restart mobile phone.
  4. Make sure mobile phone is not connected with other device.
  5. Make sure Joywear 2 is running in system.

Can’t search the product.
Make sure your location services are enabled (GPS is working), the product has enough power, the product does not connect with other phone and under activated state, then keep the product close to your phone. If still can not search it, please turn off BT function and reconnect after 20 seconds.

Can’t monitor heart rate.
Make sure you wear tightly enough to monitor heart rate.
Can’t receive notifications after enabling it.
Android phone: Make sure the product is connected with your phone. Allow
Joywear 2 App to access notifications. If any security App installed, add Joywear 2 to trust list.
iPhone: Make sure the product is connected with your phone. Reboot your phone and reconnect it with the product.

Is the product waterproof?
This product supports IP68 waterproof which allows the product to be held in water for a maximum of 30 minutes at a depth of 1 metre. You can wear it while washing your hands, having a cold shower or washing your car. Please do not wear it while diving or scuba diving.

Do I need to connect BT all the time? Are there data left when product disconnected with mobile via BT?
Data will be kept in product for seven days. When product is connected with mobile, data will be uploaded to mobile automatically. Kindly synchronize product data to mobile in time.
Note: Call and message notifications only work under BT connection status.

Customer Service
Email

FCC Caution

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Smart Watch
Model: OSW-18N
Hereby, ORAIMO TECHNOLOGY LIMITED Declares that this Smart Watch is in compliance with the essential requirements and other relevant provisions of directive 2014/53/EU.

Caution

  1. Risk of explosion if battery is replaced by an incorrect type, dispose of used batteries according to the instructions.
    • disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
    • leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;
    • a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. EUT Temperature: -10℃~+60℃(Standalone).

EU Declaration of Conformity

In accordance with EU Directives and Regulations
Company name: ORAIMO TECHNOLOGY LIMITED
Address: FLAT 39 8/F BLOCK D WAH LOK INDUSTRIAL CENTRE 31-35 SHAN MEI STREET FOTAN NT as the manufacturer hereby declares under our sole responsibility that the,
Product(s): Smartwatch Model name: OSW-18N is in conformity with the essential requirements of the RE Directive

An EU Type Examination Certificate for this Product was issued in accordance with Annex III (Module B) of the 2014/53/EU Radio Equipment Directive by Bay Area Compliance Laboratories Corp. (2014/53/EU Radio Equipment Directive Notified Body Identification Number 1313) Signed on behalf of ORAIMO TECHNOLOGY LIMITED (Signature of authorized person).

Warranty Certificate

oraimo-OSW-18N-Smart-Watch- (15)

Warranty Terms & Conditions 

  • All quality-related defects on items sold directly by oraimo or oraimo’s authorized resellers are covered by an extensive warranty, starting from the date of purchase.
  • oraimo’s limited warranty is restricted to the country of purchase. The limited warranty is void on items taken outside the country they were originally bought in or shipped to directly from an authorized online purchase.
  • This warranty covers only original oraimo products. It is not applicable to normal wear and tear, or any defects arising from damage caused by misuse of this product.
  • Warranty is for the primary product only nor transferable. Any free additional product(s) are not covered in this warranty.
  • If the product fails regardless of usage in compliance with the instruction manual and other written precaution, replacement will be provided free of charge.
  • To claim the warranty, contact the services team from the platform or store where you bought from.

For more information, please visit: www.oraimo.com

oraimo-OSW-18N-Smart-Watch- (16)

Documents / Resources

oraimo OSW-18N Smart Watch [pdf] User Guide
OSW-18N, OSW18N, 2AXYP-OSW-18N, 2AXYPOSW18N, OSW-18N Smart Watch, Smart Watch, Smartwatch, Watch

Leave a comment

Your email address will not be published. Required fields are marked *