ORACLE LIGHTING BC2 Bluetooth ColorSHIFT RGB LED Controller
BEFORE YOU GET STARTED
- If you have not already watched the installation video, please review for the latest information regarding the controller, the App, and the Installation of the device.
BC2 CONTROLLER OVERVIEW
- A- BC2 Bluetooth Control Box
- B- Fuse Holder- 10 AMP Mini
- C- Output Splitter Hub
- D- RGB Connector (Connect to RGB Lights)
- E- DC Power Cable (Connect to + Power 12-24VDC)
- F- Ground Cable (Connect to solid chassis ground or Battery – post)
INSTALLATION STEPS
- Disconnect negative battery post while working with vehicle electronics.
- Find a suitable location for the control box near the battery, away from water and heat.
- Mount the control box using the strap clamp mounts on the bottom of the control box.
- Connect RGB lights to the output cables. Cap off any outputs not being used.
- Connect Positive (Red) Power Wire to Battery + Terminal
- Connect Negative (Black( Ground Cable to Chassis Ground of Battery – Terminal.
- Reconnect the negative battery post.
- Download and install the ColorSHIFTTM PRO App and enable all Permissions.
- Connect to the Device in the App and Switch Device to “ON” Position.
CUSTOMER SERVICE
- SCAN TO WATCH
- www.oraclelights.com
- 2023 ORACLE LIGHTING
- 4401 Division St.
- Metairie, LA 70002
- P: 1800407-5776
- F: 1 8004072631
Documents / Resources
 |
ORACLE LIGHTING BC2 Bluetooth ColorSHIFT RGB LED Controller [pdf] Instruction Manual BC2-6, BC2 Bluetooth ColorSHIFT RGB LED Controller, BC2, Bluetooth ColorSHIFT RGB LED Controller, ColorSHIFT RGB LED Controller, RGB LED Controller, LED Controller, Controller |