2431 LED Built In Module Round
“
Specifications:
- Product Name: LED Built-In Panels
- Shape: Square, Round
- Importer: Prima Group 2004 LTD
- Location: Bulgaria, 1784 Sofia, Mladost 1, bl. 144, Ground
Floor - Contact: Phone: +359 2 988 45 72
Product Usage Instructions:
1. Ceiling Cutout:
Cut the ceiling according to the product ceiling cut-out
diameter size as specified in the manual.
2. Connecting the Driver:
Connect the driver to the power cable and then connect the
fixture to the driver ensuring a secure connection.
3. Mounting the Panel:
Push the springs upward into the hole and release them to secure
the panel in place.
Frequently Asked Questions (FAQ):
Q: How do I determine the correct ceiling cutout size?
A: Refer to the product manual for the recommended ceiling
cutout diameter size specific to your LED built-in panel model.
Q: What should I do if the panel does not light up after
installation?
A: Check the connections between the driver, power cable, and
fixture. Ensure that all connections are secure and that power is
reaching the panel.
“`
USER MANUAL / BEDIENUNGSANLEITUNG / MANUALE DELL’USO
LED BUILT IN PANELS / LED QUADRATISCHES LED-EINBAUMODUL / PANNELLI INCASSO QUADRATO LED
ROUND
SQUARE
1. . 1. Cut of the electricity. 1. Stellen Sie siecher, dass der Storm ausgeschalten ist. 1. Spegnere l’elettricità.
2. . 2. Cut the ceiling according to product ceiling cut out diameter size. 2. Schneiden Sie die Decke nach der ProduktgroBe bzw, nach dem entsprechenden Durchmesser aus. 2. La staffa di montaggio si fissa al soffitto con viti e tasselli.
3. . . , . 3. Connect driver to power cable. Connect fixture to the driver. Make sure that product connected safety. 3. Verbiden Sie das Netzteil mit der Zuleitung. Verbiden Sie die Lampe mit dem Netzteil Stellen Sie sicher, dass das Produckt sicher angeshlossen ist und samtliche Anschlusse gegen Beruhgrung geschutzt sind. 3. Collegare il driver al cavo di alimentazione. Collegare il dispositivo al driver. Assicurarsi che tutti i collegamenti siano sicuri.
4. . 4. Push the springs upward into the hole and release it. 4. Drucken Sie die Federn nach oben und schieben Sie diese durch das ausgeshnittene Loch. AnschlieBend lassen Sie die Federn los. 4. Spingere le molle verso l’alto nel foro e rilasciarle.
5. . 5. Fixtures is ready to use. 5. Das jeweilige Leuchtmittel ist betriebsbereit. 5. Il prodotto è pronto per l’uso.
IMPORTER: Prima Group 2004 LTD, Bulgaria, 1784 Sofia, Mladost 1, bl. 144, Ground Floor; Phone: +359 2 988 45 72; IMPORTEUR: Prima Group 2004 LTD, Bulgarien, 1784 Sofia, Mladost 1, bl. 144, Erdgeschoss; Telefon: +359 2 988 45 72; : 2004 , , 1784 , 1, . 144, ; : +359 2 988 45 72; IMPORTATORE: Prima Group 2004 LTD, Bulgaria, 1784 Sofia, Mladost 1, bl. 144, Pianoterra; Telefono: +359 2 988 45 72;
Documents / Resources
 |
OPTONICA 2431 LED Built In Module Round [pdf] User Manual 2431 LED Built In Module Round, 2431, LED Built In Module Round, Module Round, Round |