OPPLE LED Linear Light Instruction Manual

OPPLE LED Linear Light

Specifications

• Product Name: LED Linear Light
• Date: 08-01-2024
• Model Numbers: 521028002600, 521028002700
• Color Temperature: 3000K/4000K
• Weight: 0.59Kg, 0.8Kg
• Dimensions:
  • Length: 600mm (LEDLinear-Bali L600-8W)
  • Length: 900mm (LEDLinear-Bali L900-12W)
  • Diameter: 46mm

Product Usage Instructions

1. Ensure the power source is off before installation.
2. Mount the LED Linear Light securely in the desired location.
3. Connect the light to the power supply following the wiring diagram provided.
4. Turn on the power and test the light to ensure proper functionality.
5. Adjust the color temperature as needed using the specified controls.

WEIGHT

DIMENSION

Light Source

This product contains a light source of energy efficiency class (B)

Safety Instructions

To ensure correct function and safety, please read and follow all instructions carefully before using the product:

1. Turn off the power supply before installation or before doing any maintenance work.
2. Do not install any luminaire near the heat source.
3. Do not exceed the nominal supply voltage or amperage ratings.
4. All wiring and installation of the light fitting must adhere to local and national wiring rules.
5. Take care not to pull any electrical wires during unpacking as this may damage the connection.
6. Lay out all the components on a smooth surface and make sure no components are missing before assembling.
7. To avoid injury or damage to the fitting, please ensure that power leads and screws are secure before connecting the power.
8. Please keep instructions for future reference.
9. Please refer to the IP(Ingress Protection) rating of this luminaire when deciding the location of installation.
10. If the luminaire is exposed to a highly corrosive environment(coastal region), it will require a higher durability of powder coat, consult the manufacturer before installation.

Installation Procedure

WARNING 

1. Switch off before installation.
2. Switch on only after complete installation and examination of the circuit.
3. Professional electrician for installation and maintenance only.

Waterproof Installation Tips(If applicable)

Wall mount installation

Opple Lighting B.V.

• Meerenakkerweg 1-07 5652 AR Eindhoven
• The Netherlands
• service@opple.com
• www.opple.com

OPPLE Lighting Co., Ltd.

• Room 411, Building 1 No. 6111, Longdong Avenue,
• Pudong New District, Shanghai City 201201,P. R. China

FAQ

• Q: What is the IP rating of the LED Linear Light?
  • A: The product has an IP44 rating, making it suitable for indoor use.
• Q: What should I do if the light does not turn on after installation?
  • A: Check the power connection and ensure it is secure. If the issue persists, contact customer support for further assistance.
• Q: Can I dim the LED Linear Light?
  • A: Some models may support dimming functionality. Refer to the product specifications or consult the user manual for details on dimming compatibility.