OPCOM O2 Garden Table Light-LOGO

OPCOM O2 Garden Table LightOPCOM O2 Garden Table Light-PROD

OVERVIEW

Congratulation on your purchase for O2 Garden, you will enjoy this table garden with an easy setup, No dirty hands, No bugs clean water Automatically Hydroponics gardening design to offer you green environment and fresh air, and humidity balance.. O2 Garden is great design to grow many kinds of plants, Succulent, Microgreen, and Mini indoor plants is recommended. Start this wonderful experience now!!

What‘s included:OPCOM O2 Garden Table Light-FIG1

  1. 1 Main Device
  2. Inner Water Basin
  3. Cleaning Sponge
  4. AC Adapter
  5. Water Spray Bottle
  6. Manual Warranty Card

Open Box

  1. Move up and 3 Rotary 180 degreeOPCOM O2 Garden Table Light-FIG2
  2. O2 Garden Provide a variety of planting methods
    Application AOPCOM O2 Garden Table Light-FIG3
    Place the purchased 3″~5″ pot directly at the bottom of the inner water basin and water it regularly
    Application BOPCOM O2 Garden Table Light-FIG4
    Place the medium flat on the bottom of the inner water basin, Moss ferns Plant on the medium and keep it moist
  3. Plug Adaptor turn on, start for GrowthOPCOM O2 Garden Table Light-FIG5
  4. Press the “Growth” button or rotary arm on top of planting will auto switch to Growth modeOPCOM O2 Garden Table Light-FIG6

Product environment description :

This product is designed with reference to the home environment, without built-in temperature control, it is best to place this product in an indoor environment where the average temperature is 25 degrees Celsius for planting and growth (18~30 degrees Celsius range), or when the temperature exceeds, the air circulation needs to be properly adjusted so that the plants can grow smoothly.
(except for individual special high and low-temperature plants).

Panel Fuction Status Time(On/Off) Fan Remark
 

 

 

 

 

Power

 

Reading

 

ON

Growth                         HI

LOW

OFF

 

 

 

 

Power

   

Press for “Starting”

Press 1 Sec. for “Shutdown”

  When Power ON : Push Power button Bi sound and until BiBi sound (About 5seconds) to reset timeline.

When Power OFF: Push Power button Bi sound and until BiBi sound (About 5seconds) to reset timeline.

 

Reading

   

Press for “On” Press for “Off”

 

According to manual setting

Press 1sec start to dimmer, every 0.5sec change 1step with “Bi” confirm

Reading/Growth mode: Rotation arm 45° switch to reading mode, turn back to original mode.

 

Growth

  LED:24 Hrs/Daily LED:16 Hrs/Daily LED:9 Hrs/Daily LED:Off  

 

According to manual setting

 

When the LED is in the “ON” state, press and hold for 5 seconds.BiBi 2 sounds are set as the power-on time point for automatic wake-up.

When the LED is in the “OFF” state, press and hold for 5 seconds, and the BiBi 2 beeps are set as the time point for automatic shutdown.

 

(Brightness)

  Adjust brightness with each press According to manual setting Brightness 100% 75% 50% 25% 0%

 

   
Fan   Press for “On” Press for “Off”  

Please visit OPCOM’s official website for more information and video www.opcomfarm.com

Documents / Resources

OPCOM O2 Garden Table Light [pdf] User Guide
O2 Garden Table Light, O2, Garden Table Light

References

Leave a comment

Your email address will not be published. Required fields are marked *