onn Bluetooth In-Ear Headphones User Guide
What’s in the box
- Ear Fins
- Ear Caps
- Bluetooth In-ear Headphone
- Product Guide
- USB Sync & Charging Cable
Charge 
Bluetooth Connect
Play
Power Off
Power On
Calling
Wearing Overview
Troubleshooting
- I cannot turn the headphone on Make sure that you fully charge the headphone before turning it on.
- My mobile phone is not able to find the Bluetooth headphone Check that the headphone is in pairing mode (Blue/Red indicator light flashes quickly). Delete the existing Bluetooth headphone name in phone, and search again. If still no search result, please restart the headphone and phone, and try again.
- After successfully pairing my mobile phone and Bluetooth headphone, It got disconnected Check if the battery level is too low. Check whether the headphone is within 10 meters (30 feet) of your phone. The connection may be affected by obstructions such as walls or other electronic devices. Try moving closer to the device you are connected to.
- When I am answering a call, I cannot hear anything Check whether the phone is connected with Bluetooth headphone, instead of speaker or phone when answering a call. Try adjusting the volume on your mobile phone. Press the Vol+ or Vol- Buttons to adjust the volume.
- When I am listening to the music, I cannot hear anything Press the Vol+ Button to adjust the volume. Reconnect the headphone with your mobile phone. Check if the media is playing on the phone.
- I cannot charge the headphone Check whether the charging pin and the other end are connected well. Check whether the charging cable is functional.
Note
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
SPECIFICATION
| Product Specifications | Description |
|---|---|
| What’s in the box | Ear Fins, Ear Caps, Bluetooth In-ear Headphones, Product Guide, USB Sync & Charging Cable |
| Charge | Instructions on how to charge the headphones |
| Bluetooth Connect | Instructions on how to connect the headphones to Bluetooth |
| Play | Instructions on how to play music or other audio through the headphones |
| Power Off | Instructions on how to power off the headphones |
| Power On | Instructions on how to power on the headphones |
| Calling | Instructions on how to make and receive calls using the headphones |
| Wearing Overview | Instructions on how to wear the headphones |
| Troubleshooting | Instructions on how to troubleshoot common issues with the headphones, including not being able to turn them on, difficulty connecting to Bluetooth, and issues with calls or audio playback |
| Note | Important information on FCC compliance and RF exposure requirements |
FAQS
Make sure that the headphones are in pairing mode (Blue/Red indicator light flashes quickly). Delete the existing Bluetooth headphone name in phone, and search again. If still no search result, please restart the headphone and phone, and try again.
Make sure that you fully charge the headphone before turning it on. To turn on the headphones, press and hold the Power On button until the blue light flashes.
The box includes ear fins, ear caps, Bluetooth In-ear Headphone, a product guide, and a USB sync & charging cable.
When you receive a call, press the Power On button once to answer the call.
Check if the battery level is too low. Check whether the headphone is within 10 meters (30 feet) of your phone. The connection may be affected by obstructions such as walls or other electronic devices. Try moving closer to the device you are connected to.
Check that the headphone is in pairing mode (Blue/Red indicator light flashes quickly). Delete the existing Bluetooth headphone name in phone, and search again. If still no search result, please restart the headphone and phone, and try again.
Check whether the phone is connected with Bluetooth headphone, instead of speaker or phone when answering a call. Try adjusting the volume on your mobile phone. Press the Vol+ or Vol- Buttons to adjust the volume.
Press the Vol+ Button to adjust the volume. Reconnect the headphone with your mobile phone. Check if the media is playing on the phone.
Check whether the charging pin and the other end are connected well. Check whether the charging cable is functional.
Make sure that the headphones are fully charged before use. Keep the headphones within 10 meters (30 feet) of your phone. Avoid obstructions such as walls or other electronic devices that may interfere with the connection.
onn Bluetooth In-Ear Headphones User Guide – Download [optimized]
onn Bluetooth In-Ear Headphones User Guide – Download
