FUZZ Anniversary Oneder Fuzz Pedal
Product Specifications
- Controls: Level (left knob) and Gain (right knob), Gain Toggle:
- I: low gain, II: medium gain, III: high gain
- Filter Footswitch: switches between Red and Green mode
- Engage Footswitch: bypasses or engages the pedal
- Power: 9V DC Centre Negative Power ONLY, Current Draw: less than 100mA
Description
To celebrate Oneder’s fifth anniversary, we have decided to reissue one of the very first Oneder offerings: the ONEDER FUZZ. Based on the dual-voiced, octave-inducing, over-engineered fuzz pedals from the 60s and the 990s(the Super one and the Hyper one), the Oneder Fuzz has its character and flair. The FILTER footswitch toggles between GREEN mode, which is an explosive, mid-scooped fuzz, and RED mode, a mid-forward growly fuzzy distortion. Between these essentially polar opposite fuzz sounds and the 3-gain toggle switch, you’re bound to find your new favourite doomy/stoney tone!
CONTROLS
Level (left knob) and Gain (right knob)
- Gain Toggle: I: low gain II: medium gain III: high gain
- Filter Footswitch: switches between Red and Green mode
- Engage Footswitch: bypasses or engages the pedal
External Controls
The Level knob adjusts the overall volume of the effect, whilethe Gain knob controls the amount of fuzz/distortion. Use the GainToggle to select between low, medium, and high gain settings. TheFilter Footswitch switches between different modes, and the EngageFootswitch bypasses or engages the pedal.
Internal Controls & Tips
- Inside the pedal, there are two internal trimpots. DO NOT TURN THESE UNLESS YOU ABSOLUTELY MUST, and if you do, use a small screwdriver and GENTLY turn. DO NOT use force, or it’ll strip and damage your pedal/void your warranty.
- High Cut Trimmer (top): This trimmer is upside down and comes factory set at fully counterclockwise (full brightness). Gently turn clockwise to reduce the treble content of the fuzz
- B.ias Trimmer (bottom): comes factory set at noon. You don’t need to touch this one. BBut ifyou must experiment, see if adjusting this in small increments makes you dig your fuzz even more!
- There are a LOT of fuzz sounds and levels of gain and character available in this pedal. It is very sensitive to different pickup outputs and instruments.
- You can achieve some “barely there” sputteryfuzz sounds in low-gain mode, and blown-out extreme fuzz in high-gain mode.
- Medium gain mode (II) is a great place to start. The Oneder Fuzz also really shines as an octave fuzz.
- When you play above the 12th fret on the neck pickup!
Tips for Getting Different Sounds
The pedal offers various fuzz sounds and levels of gain. Experiment with different pickup outputs and instruments for unique tones. Low-gain mode provides subtle fuzz, while high-gain mode delivers extreme fuzz. Medium gain mode is a good starting point.
Special Features
The Oneder Fuzz excels as an octave fuzz when playing above the 12th fret on the neck pickup.
Power Requirements
Use a 9V DC Centre Negative power supply with a current draw of less than 100mA. Avoid using batteries for power. Isolated power is recommended for noise-free operation.
WARRANTY INFO
9V DC Centre Negative Power ONLY. No battery snap. Isolated power is recommended for noise-free operation.
Current Draw: less than 100mA
- Oneder Effects pedals are covered under warranty for materials and workmanship for
- 1 year after the date of shipment, tied to the original owner only. Warranty is non-transferable.
- Pedals under warranty will be repaired for no charge. If a pedal is found defective within 30 days of purchase, we will provide a shipping label. In the event of a non-warranty repair, the customer is responsible for the cost of parts, labour, and return shipping.
- The cause of any defect or malfunction is determined at our discretion.
- The warranty covers manufacturing defects as well as mechanical or electrical failure. Warranty does not cover liquid damage, scratches and dents, use of the wrong power supply, or other forms of misuse.
- Contact us at info@onedereffects.com or through a contact form on our website to initiate a repair. Be as thorough as you can be about your setup, power supply, and the issues you are having with the pedal.
- Things happen, but we want to make sure we get it right so you can enjoy your gear!
FAQs
Q: What is the warranty coverage for Oneder Effects pedals?
A: Oneder Effects pedals are covered under warranty for materials and workmanship for 1 year after the date of shipment, applicable to the original owner only.
Q: What should I do in case of a defect or malfunction?
A: Contact Oneder Effects at info@onedereffects.com or through the contact form on their website to initiate a repair. Provide detailed information about your setup, power supply, and the issues you are facing with the pedal.
Documents / Resources
 |
Oneder FUZZ Anniversary Oneder Fuzz Pedal [pdf] User Guide FUZZ Anniversary Oneder Fuzz Pedal, FUZZ, Anniversary Oneder Fuzz Pedal, Oneder Fuzz Pedal, Fuzz Pedal, Pedal |