V2 Oneder Drive
“
Specifications
- Product Name: ONEDER DRIVE V2
- Controls: Level, Gain, Clipping Toggle, MKII Mode Toggle,
Tone - Power Requirement: 9V DC Center Negative Power ONLY
- Current Draw: Less than 100mA
- Warranty: 1 year for materials and workmanship
Product Usage Instructions
Controls Overview
- Level: Adjusts the volume of the Oneder
Drive. - Gain: Controls the amount of overdrive
produced. Clockwise for more gain, counter-clockwise for less. - Clipping Toggle: Select between op-amp
clipping (‘+’) for open, full-range, fuzzy sound and LED/silicon
diode hybrid clipping (‘-‘) for a vintage character. - MKII Mode Toggle: Choose between MKI for the
original sound or MKII for a gainier, brighter tone. - Tone: Adjusts the treble. Clockwise for more
treble, counter-clockwise for less.
Settings
- MKI 90’S FUZZ: Setting for a 90’s fuzz
sound. - MKII POWER POP DRIVE: Setting for a powerful
pop drive. - MKII MID BOOST: Setting for a midrange
boost.
Power Requirements
Use a 9V DC Center Negative Power ONLY. No battery snap.
Isolated power is recommended for noise-free operation.
Warranty Information
The product is covered under warranty for materials and
workmanship for 1 year after the date of shipment, applicable to
the original owner only. Contact us at info@onedereffects.com for
repair initiation.
Frequently Asked Questions (FAQ)
Q: What happens if my pedal is found defective within 30 days
of purchase?
A: We will provide a shipping label for the return and repair of
the pedal at no additional cost.
Q: What does the warranty cover?
A: The warranty covers manufacturing defects and mechanical or
electrical failures. It does not cover liquid damage, scratches,
dents, misuse of power supply, or other forms of misuse.
“`
ONEDER DRIVE V2
The pedal that started it all for Oneder is BACK! Introducing the 5 Year Anniversary Oneder Drive. It has all of the same great tone as the original from 2020, but with the added versatility of the external tone control and MKII mode. Not based on any classic circuit, the Oneder Drive is a distortion for those who want CHARACTER. Something new, yet familiar. Power. Grit. Rasp. Midrange. From boost to fuzz and everywhere in between, Oneder Drive has your back. And it’s gold.
CONTROLS
Level – Controls the volume of the Oneder Drive.
Gain – Controls the amount of overdrive the Oneder Drive produces. Counter-clockwise for less gain, clockwise for more gain.
+
Clipping Toggle – ‘plus’ for op-amp clipping (open, full-range, fuzzy) and ‘minus’ for an LED and silicon diode hybrid clipping that
–
accentuates the mid range, rolls off highs, and gives it more of a vintage character. Clipping changes are most noticeable at higher
gain settings.
MKII Mode Toggle – MKI for the original Oneder Drive sound, and MKII for a gainier, brighter sound developed for this new version!
MKI
Tone – Controls the treble of the Oneder Drive. CCW for less treble, CW for more treble. Start with this turned all the way up and dial back from there to suit your sound.
SETTINGS
+
MKI
90’S FUZZ
–
MKII
POWER POP DRIVE
+
MKII
MID BOOST
WARRANTY INFO
9V DC Center Negative Power ONLY. No battery snap. Isolated power recommended for noise-free operation.
Current Draw: less than 100mA
Oneder Effects pedals are covered under warranty for materials and workmanship for 1 year after date of shipment, tied to the original owner only. Warranty is non-transferrable. Pedals under warranty will be repaired for no charge. If a pedal is found defective within 30 days of purchase, we will provide a shipping label. In the event of a non-warranty repair, the customer is responsible for the cost of parts, labor, and return shipping.
Cause of any defect or malfunction is determined at our discretion. The warranty covers manufacturing defects as well as mechanical or electrical failure. Warranty does not cover liquid damage, scratches and dents, use of the wrong power supply, or other forms of misuse.
Contact us at info@onedereffects.com or through a contact form on our website to initiate a repair. Be as thorough as you can be about your setup, power supply, and the issues you are having with the pedal. Things happen, but we want to make sure we get it right so you can enjoy your gear!
Documents / Resources
 |
ONEDER EFFECTS V2 Oneder Drive [pdf] Instructions V2 Oneder Drive, V2, Oneder Drive, Drive |