ONE FOR ALL URC1921 Sharp Remote Control

Specifications

• Model: URC 1921 IMAGE&FUNCTION
• Batteries: 2 AAA batteries
• Compatibility: Works with newer Sharp TVs

Product Usage Instructions

Step 1: Set Up Your Television
Make sure the batteries are inserted correctly in the remote.

Step 2: Troubleshooting
If some keys are not working as expected, follow these steps:

Resetting the Remote

1. Ensure your TV is on (not on standby).
2. Hold down RED + BLUE until the LED blinks twice.
3. Point the remote towards the TV and hold down the POWER KEY until the TV turns off.
4. Release the POWER KEY once the TV turns off. The LED will blink twice.
5. Test the rest of the keys on the remote. If they work, your remote is ready to use.

Programming Specific Keys

1. Ensure your TV is on (not on standby).
2. Hold down RED + BLUE until the LED blinks twice.
3. Point the remote towards the TV and hold down the specific key that is not working correctly.
4. Release the key once the correct function is displayed on the screen.
5. The LED will blink twice, indicating successful programming.

IMAGE & FUNCTION

1. LINK
   Link, HDMI Control
2. SWAP
   Last Channel, Previous Program
3. SOURCE
   Source, Input Select
4. ECO
   Eco Mode
5. SCREEN
   Screen Size, 16:9
6. SUB
   Subtitles – Untertitel
7. EPG
   TV Guide
8. NET
   Internet
9. MEDIA
   Media Browser
10. C
    Clear, Cancel

STEP 1: SET UP YOUR TELEVISION

• THE MAJORITY OF NEWER SHARP TVS SHOULD WORK DIRECTLY.
• After putting batteries in, just test some of the keys, and if they work, your remote is ready. If not, follow the next steps:

• Make sure your TV is on (not on standby).
• Hold down RED + BLUE until the LED blinks twice.

• Point towards the TV and hold down the POWER KEY until the TV turns off.
• The remote will send a different Power signal every 3 seconds. As soon as the TV turns off, let go of the POWER KEY.
• The LED will blink twice. Now test the rest of the keys on the remote. If they work as your original did, your remote is ready to use.

FINISH

• If you find some keys still do not work as expected (or not at all), proceed to the next step.

STEP 2: IF STEP 1 DOES NOT WORK AS EXPECTED

ARE SOME KEYS NOT WORKING AS EXPECTED?
If you find some keys do not work as expected (or not at all), proceed to the next step.

• Make sure your TV is on (not on standby).
• Hold down RED + BLUE until the LED blinks twice.

• Point towards the TV and hold one of the keys that is not working correctly (for example MENU).
• The remote will send a signal every 3 seconds.
• When the correct function is shown on the screen (in this case the MENU), let go of the key.
• The LED will blink twice – your remote is ready to use.

FINISH

BATTERY DISPOSAL (EUROPEAN DIRECTIVE 2006/66/EC)

• Batteries must not be disposed of together with other household waste. They should be handed over for proper disposal at a designated collection point for used batteries. This will help prevent potential negative effects of the product on the environment and/or human health.
• UNIVERSAL ELECTRONICS / ONE FOR ALL guarantees to the original purchaser that the product will be free from defects in materials and workmanship under normal and correct use for a period of one (1) year from the date of purchase. If, within the one-year (1 year) warranty period, the product is found to be defective, it will be repaired or replaced free of charge. Shipping costs to the service center are the responsibility of the owner; return shipping costs will be covered by UNIVERSAL ELECTRONICS / ONE FOR ALL.
• This warranty does not cover damage or malfunctions caused by products or services not provided by UNIVERSAL ELECTRONICS / ONE FOR ALL, or resulting from installation not in accordance with the instruction manual. This also applies if the product has been modified or repaired by parties other than UNIVERSAL ELECTRONICS / ONE FOR ALL, or if the fault is caused by accident, misuse, abuse, neglect, improper handling, incorrect application, faulty installation, improper maintenance, alteration, modification, fire, water, lightning, natural disasters, improper use, or carelessness.
• To obtain warranty service during the warranty period, the original proof of purchase must be presented to enable verification of service eligibility.
• If this product was purchased for purposes not related to work, business, or profession, you may have rights under national legislation governing the sale of consumer goods. This warranty does not affect those rights.

CZECH – PRODUCT DISPOSAL (EUROPEAN DIRECTIVE 2002/96/EC)

• The symbol of the crossed-out wheeled bin on this product indicates that the product has been manufactured using high-quality components that can be recycled and reused in accordance with European Directive 2002/96/EC. Do not dispose of this product with regular household waste. Please check local regulations regarding separate collection of electrical and electronic equipment to ensure this product is disposed of properly.

UK

• www.oneforall.com

FAQs

Q: How do I dispose of the batteries?

A: Do not dispose of batteries with regular household waste. Please familiarize yourself with the local system for proper disposal of empty batteries to prevent negative consequences for the environment and human health.

Documents / Resources

ONE FOR ALL URC1921 Sharp Remote Control [pdf] Instruction Manual URC1921 Sharp Remote Control, URC1921, Sharp Remote Control, Remote Control, Control

References

• User Manual