ONBALANCE SS-100 Balance Square Scale

Thanks for purchasing the SQUARE Digital Mini Scale! This User Guide is designed to get you up and running quickly with your scale. Scales are precision instruments and require proper care and skill to get the best results.
If you have questions or need support, visit us at http://www.obscales.com/support or scan the QR Code on the back of this manual using your smartphone.

What’s In The Box

Key Descriptions

• ON/OFF – Turns the scale ON or OFF.
• UNIT – Changes the weighing unit.
• PCS – Enters counting mode. Hold to set sample quantity for average piece weight calculation.
• TARE – Zeroes the scale. Also subtracts the weight of an empty container (see Tare Function).

Weighing Your First Item

1. Press the ON/OFF key to turn the scale on.
2. Place the item on the centre of the weighing platform.
3. Take your reading from the display. You can press the UNIT key to convert between weighing units.
4. The scale’s auto-off function will turn the scale off after 3 minutes of inactivity or you can press the ON/OFF key to turn the scale off.

   

Counting Function

1. Place a sample quantity of 25, 50, 75 or 100 pcs of the item you want to count on the platform.
2. Press and hold the PCS key to enter counting setup.
3. Tap the UNIT key to select your sample quantity.
4. Press the PCS key to confirm the sample qty and set the average piece weight (APW) in memory.
5. You may now place any quantity on the scale and view the piece count (‘pcs’ will show on the display).

Things To Avoid

Tare Function

The Tare function allows you to subtract the weight of a container so that the display only shows the weight of the contents.

NOTE: The weight of the container will subtract from LLl the available capacity and will leave a negative value on the display once the weight is removed. Press TARE again to return the display to zero.

Accuracy

Your scale comes calibrated from the factory and most users won’t need to calibrate their scale for a long time. You should check your scale’s accuracy periodically using calibration weights and perform calibration if necessary.
NOTE: Only use trusted calibration weights. Household items such as bottles and cans with weights printed on the side are not suitable for checking accuracy as these values are approximate and don’t include the container weight (Net Weight}.

Calibration

Calibration adjustment is permanent and lD should only be performed using accurate calibration weights that match the requirements for your scale (see the chart on back). Do not use coins or other household items to calibrate.

1. Prepare the required weight for your scale (see chart on back).
2. Find a flat and level surface to perform calibration and let the scale adjust to room temperature.
3. Press ON/OFF to turn the scale on and wait for the scale to stabilise.
4. Press and hold the UNIT key until the display shows ‘CAL’.
5. Make sure nothing is on the platform then press UNIT to confirm the zero point.
6. The display will then flash the required calibration weight.
7. Place the required calibration weight on the centre of the platform.
8. The display will show ‘PASS’ then return to normal weighing mode. You may now turn the scale off or continue weighing.

   

Specifications

For more information, including weighing tips and support, scan this code with your smartphone
Or visit us online at www.obscales.com/support/

Documents / Resources

ONBALANCE SS-100 Balance Square Scale [pdf] User Guide SS-100 Balance Square Scale, SS-100, Balance Square Scale, Square Scale, Scale

References

• User Manual