Omron HD047-12V Pluggable Power Relay Module User Manual
Feature
- Omron G2R-1-E industrial power relays, switching current up to 16 Amp at 250VAC (or 30VDC).
- Support control mode: DC Common positive (Sink, NPN), DC Common negative (Source, PNP), or AC mode.
- LED indicator for each relay channel.
- Relay coil protection by means of a freewheeling diode.
- Easy to replace pluggable relays.
- Output switch COM to N/O with metal oxide varistor, surge protection up to 4500A(8/12µS).
- High quality fireproof nylon material DIN rail mount carrier (UL CE certified, not China low quality carrier), can support width 35mm / 32mm / 15mm rail.
- UL CE CQC certified terminal blocks. 94-V0 FR-4 fiber glass PCB.
Characteristic Parameters
| SKU | HD047-12V | HD047-24V | |
| Relay Part Number | G2R-1-E 12VDC | G2R-1-E 24VDC | |
| Operating Voltage Range | DC 9.0 – 18V AC 9.0 – 15V |
DC 18 – 36V AC 15 – 30V |
|
| Operating Current (Each channel) | 32mA @12V | 16mA ©24V | |
| For AC | Resistive load: 250VAC. 16AmpInductive load: 250VAC, 8Amp | ||
| For DC | Resistive load: 30VDC. 16AmpInductive load: 30VDC. 8Amp | ||
| Mechanical endurance | 20.000.000 operations min. (at 18,000 operations/hr) | ||
| Electrical endurance | 100,000 operations min. (at 1.800 operations/hr under rated load | ||
| Terminal Blocks: | |||
| Input | Wire range 26AWG to 12AWG / 2.5mm square. Pitch 5.0mm / 0.197″. Strip length 7mm. Screws – M2.5 | ||
| Output | Wire range 26AWG to 10AWG / 4.0mm square. Pitch 7.62mm 10.3″. Strip length 8mm. Screws — M3 | ||
Schematic
| SCHEMATIC | ||||
| CHANNEL NO. | INPUT | RELAY | OUTPUT | |
| SCREW CONNECTOR TERMINAL | CONTROL CIRCUIT UINT | SCREW CONNECTOR TERMINAL | ||
Control Mode Connects (Sink, Source, AC)
Sink/NPN
Source/PNP
AC INPUT
Dimensions
Documents / Resources
 |
Omron HD047-12V Pluggable Power Relay Module [pdf] User Manual HD047-12V Pluggable Power Relay Module, HD047-12V, Pluggable Power Relay Module, Power Relay Module, Relay Module, Module |
