OmniPower 5x Power Banks
Product Specifications
- Maximum Power: 450W
- Optimal Humidity: 30-70%
- Grounding: Required
Product Usage Instructions
- Before Using the Power Station:
Scan the QR Code and follow the steps to register the device and review the safety and handling instructions. Position the Power Station on a flat surface. Avoid placing it in cabinets. Do not expose it to direct sunlight or high temperatures. Keep it away from flammable materials and liquids. - Safety Precautions:
When using the Power Station, avoid high temperatures, direct sunlight, cabinets, flammable materials, and contact with liquids. - Setting Up the Power Station:
Set up the Power Station on a hard, flat, stable surface with good air ventilation. Maintain a 10cm gap from walls and 30cm between each unit. Install it in a dry location with optimal humidity of 30-70%. - Storing the Power Station:
Before storing, shut off the power, disconnect the cable, and power down the chargers. If not in use for more than a week, turn them off. - Connecting the Power Station:
Ensure maximum power does not exceed 450W. Use the original power cable to avoid damage or safety risks. Keep the cable intact, avoid bending or crushing it, and do not overload the socket. Always ground the Power Station properly. - Safety and Handling:
Inspect for damage before use and stop using if damaged. Do not attempt to repair Omnicharge yourself. Dispose of batteries properly through authorized providers.
BEFORE USING THE POWER STATION
Scan the QR Code and follow the steps to register the device and review the safety and handling instructions.
FOLLOW THESE SAFETY PRECAUTIONS WHEN USING THE POWER STATION:
SETTING UP THE POWER STATION
Set up your Power Station on a hard, flat, stable surface with good air ventilation around the unit.
Keep the Power Station 10cm from the walls, with a minimum 30cm gap between each unit.
Avoid heat-prone areas. The optimal temperature range is 1 ooc-400C; the maximum altitude: is 2000m.
Install the Power Station in a dry location away from humidity and moisture. Optimal humitdity 30-70%.
CONNECTING THE POWER STATION
Maximum power: 450W. Use a suitable socket and avoid overloading.
Use the original power cable only. Other brands may damage your power station or pose safety risks.
Avoid bending or crushing the power cable. Don’t place objects on it. Refrain from use if damaged.
The Power Station must be grounded. Never operate it without a properly installed ground conductor.
STORING THE POWER STATION
Shut off the Power Station power, disconnect the power cable, and power down the chargers
If your Power Station or Portable Chargers are not in use for more than a week, we recommend turning them off.
Store the power station in a cool, dry place with optimal temperature (10°C-40°C) and humidity (30-70%).
Before cleaning, disconnect the Power Station, remove the Chargers, and power them off. Use a dry cloth, and avoid liquids.
Failure to follow these safety instructions can result in fire, electrical shock, injuries, or damage to your Power Station or other property. Inappropriate use of the Power station may cause long-term damage and may void the Omnicharge warranty. For detailed warranty information and instructions on how to make a claim, please visit our warranty policy page at https://omnicharge.co/warranty-policy/.
Users must scan the QR code to access the user manual, where they can thoroughly review the safety and handling instructions.
FOLLOW THESE SAFETY PRECAUTIONS WHEN USING OMNICHARGE:
SAFETY AND HANDLING
Inspect Omnicharge for damage before use. Immediately stop using if damaged during use and do not return to the station.
If the unit does not turn on, or you see an on-screen warning notification, immediately stop using it and do not return to the station.
Use Omnicharge indoors on a stable surface avoiding high temperatures like direct sunlight or near heaters.
Omnicharge is susceptible to damage from drops, strong shocks, punctures, crushing, heat, fire, liquids, moisture, and corrosive chemicals.
Omnicharge is not user serviceable. Do not attempt to repair or modify it yourself
Omnicharge’s AC output is potentially lethal; use it with caution and avoid foreign objects falling in.
Dispose of your battery through an authorized provider in compliance with local regulations or contact support@omnipower.com for assistance.
BATTERY MAINTENANCE
Omnicharge’s lithium battery cells have a limited lifespan based on usage and environment. Follow guidelines to maximize battery life and replace when depleted.
Try to balance the usage of your Omnicharge batteries.
Avoid constant charging of lithium batteries; power down if it is expected to be idle for more than a week.
When fully charged, Omnicharge self-depletes to 80% when idle, prolonging its lifespan.
Follow on-screen notifications replace the unit immediately and remove it from the station if you see the following icon
ACKNOWLEDGMENT:
By using this product, you hereby confirm that you have thoroughly read and understood this manual, including all instructions, warnings, and safety information. Your use of the product constitutes your agreement to follow these guidelines and recommendations.
Frequently Asked Questions
- Q: What should I do if my Power Station is damaged?
A: Immediately stop using it and do not return it to the station. Contact support for assistance. - Q: Can I repair Omnicharge myself if it malfunctions?
A: No, Omnicharge is not user serviceable. Do not attempt to repair or modify it yourself.
Documents / Resources
 |
OmniPower 5x Power Banks [pdf] Installation Guide 5x Power Banks, 5x, Power Banks, Banks |