Omni 30C plus All in One Portable Powerhouse
“
Specifications:
- Wireless Charging Max Output: 10W
- Charging Phones Max Output: 10W
- Charging Earbuds Max Output: 5W
- Charging Smartwatches Max Output: 3W
- DC Port Max Output: 5A – 100W, 5V – 25V with 0.1V Accuracy
Product Usage Instructions:
Wireless Charging:
Place your phone on top of the Omnicharge’s + icon for wireless
charging. Align your phone horizontally in the center for optimal
charging.
Charging Earbuds:
Place wireless charging compatible earbuds on top of the
Omnicharge’s ( ) icon to start wireless charging.
Charging Smartwatches:
Place your smartwatch horizontally on top of the Omnicharge’s (
) icon for wireless charging.
Calibrating the Battery:
- Fully discharge the Omnicharge until it cannot be turned
on. - Fully charge the Omnicharge to 100% to calibrate the
battery.
Note: Store the Omnicharge at full battery and fully charge it
every 3 months when not in use to avoid battery depletion.
Enabling DC Output:
- Know the voltage and amperage of your device and have a
compatible cable. - To enable DC output, navigate to the DC output feature on the
device. - Confirm the voltage and amperage settings to avoid damaging
your device.
FAQ:
Q: What should I do if my phone experiences sudden
interruptions during wireless charging?
A: Lift up the phone, wait a few seconds, and adjust the
position until you achieve stable wireless charging. Minor
alignment deviations can cause interruptions.
Q: How often should I calibrate the battery of the Omni
30C+?
A: Calibrate the battery when you first receive the product and
periodically in the future. Additionally, fully charge the
Omnicharge every 3 months when not in use to avoid over
depletion.
Q: What happens if I use the wrong voltage for DC output?
A: Using the wrong voltage may damage your device. Always ensure
you select the correct voltage and amperage settings when enabling
DC output.
“`
Omni 30C+
User Manual
C1 C2
34.00 W 65.02 W
100%
0.00 W 20.3 °C
www.omnicharge.co
WIRELESS CHARGING
MAX OUTPUT 10W
CHARGING PHONES MAX OUTPUT 10W
Place your phone on top of the Omnicharge’s “+” icon to get fast and reliable wireless charging. For optimal wireless charging, align your phone horizontally in the center of the Omnicharge as shown in the picture.
CHARGING EARBUDS MAX OUTPUT 5W
Place your wireless charging compatible earbuds on top of the Omnicharge’s ( ) icon to start wireless charging.
CHARGING SMARTWATCHES MAX OUTPUT 3W
Place your smartwatch horizontally on top of the Omnicharge’s ( ) icon to start wireless charging.
You will see a flashing wireless icon when a wireless devices has been detected.
Note: The optimal charging range varies depending on the size of the receiver coil of your phone. Some phone models have small receiver coils and can experience sudden interruptions after few seconds of charging. This is because of minor alignment deviations between the transmitter and receiver coil. Please lift up the phone, wait a few seconds and finetune the position until you get a stable wireless charge.
POWER YOUR NEXT ADVENTURE
Earbuds
Smartwatch
Smartphone
Tablet
13″ Laptop
Up To 30 Charges Up To 45 Charges Up To 4 Charges Up To 2 Charges Up To 2 Charge
DSLR Camera Up To 10 Charges
BEFORE USING THE OMNI 30C+
Calibrate the battery
To ensure a correct battery readout, calibrate the battery when you first receive the product and periodically in the future.
1. Fully discharge the Omnicharge until it
cannot be turned on. Press the Power Button and you should see an empty battery icon on the screen.
2. Fully charge your Omnicharge to 100% to
finish the calibration. Once you see a fully charged battery icon, you can power the Omnicharge back on.
Note: When not in use, the Omnicharge should be stored at full battery and fully charged at least every 3 months to avoid over depletion. Failure to do so can cause the battery to malfunction and is not covered by warranty.
SCREEN
OLED screen with real time metrics
7
6
60:00
100%
C1 C2 DC 1
34.00 W
0.00 V 5
2
65.02 W
20.3 °C
3
4
1. Status Icons 2. Power Input (watts) 3. Battery Power Output (watts) 4. Battery Temperature 5. DC Output Voltage 6. Battery Percentage 7. Time Remaining
BUTTON FUNCTIONS
PRIMARY CONTROLS
· Long press to power On · Long press to power Off · Up Button: DC Outlet · Down Button: USB/Wireless
MENU CONTROLS
· Double press to enter the menu · Quick press to select
· Up Button: Move up · Down Button: Move down
100%
C1 C2
DC
34.00 W 65.02 W
0.00 V 20.3 °C
1 Power & Menu
Button
2 OLED Screen
3 USB & DC
Selector
DC PORT
MAX OUTPUT 5A – 100W
5V – 25V
WITH 0.1V ACCURACY
The DC output feature allows you to directly output DC power through the barrel port. To use this feature you will need to know the voltage and amperage of your device and have a compatible cable.
Warning: Using the wrong voltage may damage your device.
Enabling DC Output Step 1
DC OUT
USB SCREEN OFF AUTO SHUT DOWN
Step 2
15.0V = 5.0A 16.5V = 5.0A 20.0V = 5.0A 12.0V = 5.0A
Step 3
Confirm 20.0V = 5.0A?
Yes
No
Incorrect setting may harm your device.
Omnicharge keeps 4 voltage presets. You can press and hold the power button while selecting a preset to customize the voltage and amperage.
…………………………………………………………………………………………………………………………………………………………………………………………………..
DC Once active, a DC icon will appear on the screen.
USB-C PORTS
MAX OUTPUT 100W (COMBINE OUTPUT 100W)
Note: The USB-C and DC port share the same power circuit and cannot be used at the same time.
USB-C Port 1: 100W Max USB-C Ports 2: 100W Max
The USB-C ports are always on and need no configuration. Simply plug your USB-C device into any USB-C port to start charging. Note: The USB-C1 and DC port share the same power circuit and cannot be used at the same time.
USB-A PORTS
MAX OUTPUT 18W
USB-A Ports: Quick Charge QC3.0 compatible, 18W Max
RECHARGING YOUR OMNICHARGE
1) FROM THE USB-C1 PORT
USB-C1 port max input: 45W
2) FROM THE BARREL PORT
DC Input 5V – 25V, Up to 3A (5W – 45W)
Connect a USB-C wall charger and it will automatically start recharging the Omni 30C+. If the Omnicharge does not detect incoming power, try to plug in your USB-C charger while the Omnicharge is turned off.
To charge from the barrel port make sure you have a compatible charger. The Omni 30C+ uses a common 5.5 x 2.5mm connector and accepts voltages in the 5V-25V range.
Note: The USB-C1 and DC port share the same power circuit and cannot be used at the same time.
…………………. …………………. ………………….
AC wall charger 3-4 hours
Solar (up to 45W) 3-6 hours
Car power port (12V) 3-6 hours
Laptop adapter 3-4 hours
PASS-THROUGH CHARGING
Pass-through charging means that you input power to the Omnicharge while outputting power to your device (passing the power through the Omnicharge). All Omnicharge products support pass-through charging. This means that you can input power through the USB-C or DC port, and output to the USB-A and wireless.
SCREEN ICONS
ACC
USB-C OUTPUT
USB-C output is activated.
SOLAR CHARGING
Charging from solar power.
ADJUSTABLE DC OUTPUT
DC Adjustable DC output is activated.
WIRELESS CHARGING
Wireless charging is active.
LOW TEMPERATURE PROTECTION
Battery’s temperature is too low, the charging circuit is shut off.
OVERPOWER PROTECTION
Device is drawing too much power. Omnicharge will limit or cut off the output power.
LOW POWER PROTECTION
If output is higher than input and the battery is empty. Omnicharge will cut power until a sufficient battery level has been reached.
USB OUTPUT
USB ports are turned on.
RECHARGING
Your Omnicharge is being charged.
OPTIMAL CHARGING
Charging at maximum power.
HV HVDC OUTPUT
DC HVDC (high voltage DC) is activated.
OVERHEATING PROTECTION
Battery temperature is too high. Omnicharge will limit or cut off its input and output power.
OVERVOLTAGE PROTECTION
Barrel input voltage exceeds the 25V limit. Input charging circuit is shut off.
MENU NAVIGATION
1. DC OUT Turn on DC output. Set the voltage and amperage by long pressing the power button.
DC OUT USB SCREEN OFF AUTO SHUT DOWN
2. USB Choose whether your USB-A ports are On/Off at start. The default setting is on.
3. SCREEN OFF Set the screen auto shut-off time . The default setting is 5 min.
DC OUT USB SCREEN OFF AUTO SHUT DOWN
DC OUT USB SCREEN OFF AUTO SHUT DOWN
4. AUTO SHUT DOWN
Set the power auto shut-off time. The default setting is 5 min.
5. TEMPERATURE
Choose whether the temperature is displayed in celcius or fahrenheit.
6. BUTTON LIGHT
Choose whether the button lights are on or off. The default setting is on.
7. TIME REMAINING
Choose whether the time remaining is displayed.
8. LANGUAGE
Choose the screen language.
9. FACTORY RESET
Reset the Omnicharge to factory settings.
10. ABOUT
Find the model name, capacity, firmware version, and serial number information here.
Omni 30C+ 94Wh
0.0.8A/0.0.6A P3CMD05442
TECHNICAL SPECS
GENERAL Weight: 1.53 lbs (693 g) Dimension: 8.3″x3.3″x1.15″(21×8.4×2.9 cm) Combined output all ports: 100W
USB-C
PD enabled charging Inputc: USB-C15V 3A, 9V 3A, 12V 3A, 15V 3A, 20V 3A, 45W Max Outputc: USB-C1&25V 3A, 9V 3A, 12V 3A, 15V 3A, 20V 5A, 100W Max
USB-A OUTPUT
Port1: QC 3.0 5V 18W Max Port2: QC 3.0 5V 18W Max
3A, 9V 3A, 9V
2A, 12V 2A, 12V
1.5A, 1.5A,
DC PORT Bidirectional Input/output charging Input: 5~25V, up to 3A, 45W max Output: 5~25V, up to 5A, 100W max
WIRELESS CHARGING Output: 10W+5W+3W
CAPACITY 8 cells, 94Wh c/- 5%
OPERATING ENVIRONMENT Temperature 0°C-40°C Humidity 30-70% Altitude 2000m
MADE IN CHINA © 2024 Omnicharge.
is a Registered trademark. Product specifications are subject to change without notice or liability, whether to improve reliability, function, design or for any other reason.
OMNICHARGE ONE-YEAR LIMITED
MANUFACTURER’S WARRANTY
Omnicharge warrants that its hardware product shall be free from defects in materials and workmanship for one (1) year beginning from the date of original retail purchase. Omnicharge does not warrant against normal wear and tear, nor damage caused by accident or abuse.
See www.omnicharge.co/warranty for specific warranty information about your product and procedures to act on a warranty claim. Omnicharge’s entire liability and your exclusive remedy for any breach of warranty shall be at Omnicharge’s option, to repair or replace a functional equivalent of the product. You may be required to furnish proof of purchase details when making a claim under this warranty. Warranty protections are in addition to rights provided under local consumer laws and may vary among countries, states and provinces. See the full warranty information to know your consumer rights and the additional protections provided by this product warranty.
www.omnicharge.co/warranty
CUSTOMER SUPPORT
All Omnicharge products have gone through quality inspection. If you find your Omnicharge or any Omnicharge accessory is demonstrating any abnormal behavior, immediately stop all product use and contact us at: support@omnicharge.co, or visit our help center at https://support.omnicharge.co
JOIN OUR COMMUNITY TODAY
And qualify for one of these accessories:
Fast Charger
USB-C Cable
Car Charger
Protective case
SCAN QR CODE
To learn more about how you can get your free accessory.
Visit https://www.omnicharge.co/community
Documents / Resources
 |
omnicharge Omni 30C plus All in One Portable Powerhouse [pdf] User Manual Omni_30C, Omni 30C, Omni 30C plus All in One Portable Powerhouse, Omni 30C plus, All in One Portable Powerhouse, Portable Powerhouse, Powerhouse |
