omnicharge 40C+ Power Station User Manual

Getting to Know the Power Station
The Omni Power Station comes with everything you need to get started, including the portable charger, the base station, and the power cable.

Setting Up the Power Station

Set up your Power Station on a hard, flat, and stable work surface allowing for adequate air ventilation.

Place the Power Station with a minimum 10cm gap from any wall and at least 30cm between each Power Station.
Install the Power Station in a dry location, away from high humidity to prevent impact on performance and safety. Optimal humidity level is 30-70%.

Ensure the socket used is suitable for the power rating of 450W to avoid overloading.

Portable Chargers

Press the power button on the back side of the Power Station to turn it on.
Wait until the lock icon displays on all Portable Chargers screens, indicating they are connected and charging properly.

Power Station Safety & Handling
When setting up the Power Station:

Ensure proper ventilation around the unit.

Maintain distance from walls and between each Power Station.
Avoid high humidity areas to prevent impact on performance.

Frequently Asked Questions

Q: What should I do if the Portable Chargers are not charging?
A: Ensure that the lock icon displays on all Portable Chargers screens, indicating proper connection. If not, reposition or reconnect the chargers. If issues persist, contact customer support.

Q: Can I use the Power Station with devices exceeding 450W?
A: No, using devices exceeding the maximum power rating of 50W can lead to overloading and potential damage to the Power Station. Use devices within the specified limits only.

INTRODUCTION

The Omni Power Station is an all-in-one solution to help you distribute power wherever, and whenever it’s needed. The Omni Power Station is designed for forward-thinking organizations that understand the need to provide portable power access to people so they can stay powered anywhere, on or off-site, without being tethered to fixed infrastructure constraints. The Omni Portable Charger is the perfect professional power solution, offering speed, versatility, and reliability. It’s perfect for charging laptops, cell phones, and all your essential tech on the move. With high-power capabilities, including a 100W USB-C port 100W DC port, and a high-speed data transmission SD card slot, it’s your go-to source for flexible and dependable power in any situation. This Portable Charger offers three different charging methods, ensuring all your devices stay powered up effortlessly, anywhere.

FEATURES

WHAT’S IN THE BOX

The Omni Power Station comes with everything you need to get started, including the portable charger, the base station, and the power cable.

BASE STATION
6 PORTABLE CHARGERS

AC POWER CABLE
USER MANUAL

GETTING TO KNOW THE POWER STATION

The Omni Power Station is a simple plug-and-play device. Just plug it into an AC outlet, and you are ready to go.

Power Switch
Power Plug

Ethernet Port

SETTING UP THE POWER STATION

Before setting up your Power Station, make sure you have a suitable location. Do not place the station in direct sunlight, next to an active heat source, or in an environment that is excessively dusty.

STEP 1: Place the chargers into the open bays with the AC port facing downwards and the screen facing upwards.
STEP 2: Plug the AC power cable into the base of the power station, and connect it to a power outlet.
STEP 3: Press the power button on the back side of the Power Station to turn it on.
STEP 4: Wait until the lock icon displays in all the Portable Chargers screens, meaning they are well connected and charging.

Note: The chargers require no force when connecting them to the charging bay. Make sure the charger is level when pushed into the slot and not crooked. Never force the Omnicharger into the charging base.

POWER STATION SAFETY & HANDLING

WHEN SETTING UP THE POWER STATION

Set up your Power Station on a hard, flat, and stable work surface which allows for adequate air ventilation around the unit.
We recommend placing the Power Station with a minimum 10cm gap from any wall and maintaining a distance of at least 30cm between each Power Station.
Do not install the Power Station in an environment where heat can easily accumulate, this will cause the batteries to overheat. The optimal temperature is 0°C-40°C. Altitude ≤ 2000m
Install the Power Station in a dry location, away from high humidity as moisture and oxidation of internal electronic components can impact performance and safety. Optimal humidity is 30-70% .
The maximum power for each power station is 450W. Please use a socket that is suitable for this power rating and avoid overloading.
Please use the original power cable and avoid using other brands or models. Inappropriate power cables may damage your power station or pose safety risks.
Avoid bending or crushing the power cable, as repeated stress can weaken it. Don’t place objects on the cable, and refrain from using it if it’s damaged.
The Power Station must be grounded. Never operate your Power Station in the absence of a suitably installed ground conductor.

Failure to follow these safety instructions can result in fire, electrical shock, injuries, or damage to your Power Station or other property. Inappropriate use of the Power station may cause long-term damage to the battery cells and may void your warranty.

AVOID PLACING THE POWER STATION:

Inside a cabinet
Close to heat sources like heaters, or microwaves.

In direct sunlight
Near flammable gasses or combustible materials.

WHEN STORING THE POWER STATION

If your Power Station or Portable Chargers are not in use for more than a week, we recommend turning them off.

Shut off the Power Station power, disconnect the power cable, and power down the chargers.
Store the power station in a cool and dry location. The optimal storing temperature is 10°C-35°C and humidity is 40-70%.
Before cleaning your Power Station, disconnect it, remove the Portable Chargers, and power them down. Use a dry cloth to clean; avoid liquid and operating with wet hands.

DIAGRAM

DC PORT MAX OUTPUT 5A – 100W
The DC output feature allows you to directly output DC power through the barrel port. To use this feature you will need to know the voltage and amperage of your device and have a compatible cable.
Warning: Using the wrong voltage may damage your device.

Enabling DC Output

Once active, a DC icon will appear on the screen.

Omnicharge keeps 4 voltage presets. You can press and hold the power button while selecting a preset to customize the voltage and amperage.

HDMI PORT 4K/30HZ

Supports 3840x2160px resolution. The Omni 40C+ is equipped with an HDMI port that can mirror any laptop screen to a 4k monitor while charging the laptop at the same time.

C4 and HDMI icons will display when using the HDMI function

ENABLING ONLY HDMI

Use this feature when the Omni 40C+ is at a low battery level, and only HDMI is needed.

The C4 icon is hidden

HDMI icon always displays

SD CARD SLOT USB 3.0 SD/SDHC/SDXC

The Omni 40C+ is equipped with an SD card slot, allowing direct access to files (photos, videos, music, etc.) at high speed from the USB-C4 port.

HOW TO USE HUB MODE

USB-C PORT IN/OUT
Use the Omni 40+ as a USB hub and transfer files between your smartphones, flash drives, cameras, or laptops.

Connect the USB-C/HUB port (in the center) to a USB-C port on your laptop .
Initiate HUB mode by short-pressing the HUB button (Right button), and a HUB icon will appear on the screen.

Note:

All the remaining USB-C ports and USB-A ports can be used to transfer files from smartphones, flash drives, cameras, or other standard USB-A or USB-C devices.
Hub mode is disabled when the temperature is below 0°C.

USB-C PORTS MAX OUTPUT 100W (COMBINED OUTPUT 120W)

USB-C Port 1: 100W Max USB-C
Ports 2&3: 30W Max USB-C
Port 4: 100W Max

The USB-C ports are always on and need no configuration. Simply plug your USB-C device into any USB-C port to start charging. Note: The USB-C4 and DC ports share the same power circuit and cannot be used at the same time.

USB-A PORTS MAX OUTPUT 18W
USB-A Ports: Quick Charge QC3.0 compatible, 18W Max

SCREEN
OLED screen with real-time metrics

Status Icons
Power Input (watts)
Battery Power Output (watts)

Battery Temperature
DC Output Voltage
Battery Percentage

Time Remaining

BUTTON FUNCTIONS

PRIMARY CONTROLS

Long press to power On

Long press to Power Off
Left Button: On/Off DC Outlet
Right Button: On/Off HUB

MENU CONTROLS

Double press to enter the menu
Quick press to select

Left Button: Move up
Right Button: Move down

MENU NAVIGATION

Double-press the power button to access the menu, quickly press it to select any function, and use the DC and HUB buttons to move up or down.

DC OUT Turn on the DC output. Set the voltage and amperage by long pressing the power button.
ONLY HDMI Enable HDMI only, when the battery is low. This function disables the C4 USB-C port power.
SCREEN OFF TIMER Set the screen auto shut-off time. The default setting is 5 min.

AUTO SHUT DOWN Set the power auto shut-off time. The default setting is 5 min.
TEMPERATURE Choose whether the temperature is displayed in Celsius or fahrenheit.
BUTTON LIGHT Choose whether the button lights are on or off. The default setting is on.

TIME REMAINING Choose whether the time remaining is displayed.
LANGUAGE Choose the screen language.
FACTORY RESET Reset the Omnicharge to factory settings.

ABOUT Find the model name, capacity, firmware version, and serial number information here.

RECHARGING YOUR PORTABLE CHARGER

Charging time 4-6 hours

RECHARGE FROM THE POWER STATION Return the Portable Chargers to the Power Station charging base for optimal charging. A battery icon should appear on the screen to confirm proper charging.

BALANCED BATTERY CHARGING MODE

Upon reaching a full 100% charge, the Portable Charger will automatically discontinue the charging process. To ensure optimal battery health, if left unused for an extended period, the charger will self-deplete to 80%. Please note that it is normal for the charger not to maintain a constant 100% charge, as this proactive measure is designed to promote longevity.

BATTERY MAINTENANCE

The Portable Charger uses lithium battery cells which have a limited number of cycles depending on usage and environment. Use the following guidelines to help maximize battery life. Once the batteries are depleted beyond usage, they will need to be replaced.

Try to balance the usage of your Omnicharge batteries. Excessive use of a single battery can shorten the lifespan of the battery cells.
Lithium batteries should not be left charging on the station constantly without use. If your power station is not in use for more than a week, we recommend turning the station and chargers off and topping them up every 3-4 months.
Adhere to the guidelines for proper handling and storage of the Power Station and Portable Chargers to prevent unnecessary depletion of their battery life.

Any battery that fails due to misuse, abuse, age, or improper maintenance, is not covered by our warranty.

BATTERY HEALTH MONITORING

The Portable Charger includes a dynamic battery health and power monitoring system. It adjusts recharge and rest times for lithium batteries, along with power output, based on battery conditions and the environment. You’ll be notified on-screen if potential overuse due to battery depletion or end of life, before any permanent deactivation.

When the following screen alert appears, you’ll be able to use the Portable Charger but the unit will soon need to be replaced. Battery Health Alert © Contem
When the following screen alert appears, the battery has reached its end of life and has been deactivated. Please replace the unit.

PORTABLE CHARGER SAFETY & HANDLING

Inspect the Portable Charger for any type of damage before use. If damaged when using it, stop using it, do not place it back at the station, and notify your supervisor for a replacement.

The Portable Charger is designed for indoor use only. Set up your Portable Charger on a hard, flat, and stable work surface which allows for adequate air ventilation around the portable charger.
Do not place or use the Portable Charger in high-temperature environments, including heat caused by intense sunlight or other forms of heat like inside a car, next to a radiator or heater.
The Portable Charger may be damaged if dropped or exposed to strong shock, punctured or crushed, subjected to heat or fire, or in contact with any liquids, moisture, or corrosive chemicals.

If the unit does not turn on, or there is a warning notification on the unit, immediately stop using it, do not place it back on the station, and inform your supervisor to replace the unit.
The Portable Chargers AC output generates the same potentially lethal AC power as a normal household wall outlet. Please use it carefully just like using a normal AC wall outlet. DO NOT insert foreign objects into outputs or ventilation holes.
The Portable Charger is not user-serviceable. Do not attempt to replace or modify the Portable Charger yourself, this may damage the battery which can cause overheating, fire, or injury.

Dispose of your device’s battery through an authorized provider in compliance with local environmental regulations, or contact support@omnipower.co for disposal assistance.

Failure to follow these safety instructions can result in fire, electrical shock, injuries, or damage to your Portable Charger or other property. Inappropriate use of the Portable Charger may cause long-term damage to the battery cells and may void your warranty.

NOTICE
This product is meant for use only in conjunction with appropriate devices. Please consult your device packaging to determine whether this product is compatible with your particular device. The manufacturer is not responsible for any damages to any device incurred through the use of this product. The manufacturer shall not in any way be liable to you or to any third party for any damages you or any third party may suffer as a result of the use, intended or unintended, or misuse of this product in conjunction with any device or accessory other than the appropriate device for which this product is designed. You are responsible for product use with an unintended device and any damages resulting from such use. You agree to indemnify the manufacturer for any resulting injuries to any third party).

GENERAL

POWER STATION

Weight: 12.07 kg (26.6lbs)
Dimensions : 48.6 cm x 18.4 cm x 33.5 cm (19.1 x 7.2 x 13.2 in).

PORTABLE CHARGER

Weight: 2.43lbs (1100g)
Dimensions: 9.5″ x 2.7″ x 2.5″ (24.3 x 7.1 x 6.5 cm)

Combined output all ports: 120W OUTPUT 24V 2A (per charging bay) INPUT 100V – 240V~, 50/60Hz, up to 4A

OPERATING ENVIRONMENT

Temperature 0°C-40°C

Humidity 30-70% Altitude ≤ 2000m

PORTS & POWER

USB-C OUTPUT

Bidirectional Input / Output charging

INPUT:
USB-C PD: 5V=3A, 9V=3A, 12V=3A, 15V=3A, 20V=5A, 36W max

OUTPUT:
USB-C1: 5V=3A, 9V=3A, 12V=3A, 15V=3A, 20V= 5A, 100W max
USB-C2&3: 5V=3A, 9V=3A, 15V=3A, 30W max
USB-C4: 5V=3A, 9V=3A, 12V=3A, 15V= 2A, 20V=5A, 100W max

USB-A OUTPUT
Port 1&2: 5V = 3A, 9V =3A, 12V =2A 18W Max

DC PORT

Bidirectional Input/output charging INPUT: 5~25V, up to 5A, 36W

Max OUTPUT: 5~25V, up to 5A, 100W Max HUB (Front)

USB-A: USB3.0 /
USB-C: USB 2.0 HDMI (Back) 4K/30Hz/ HDMI SD (Back) SD/SDHC/SDXC /USB3.0

BATTERY CAPACITY
12 cells, 142Wh (6400mAh@22.2V) 38.400mAh

CAPACITY
12 cells, 142Wh (+/- 5%)

MADE IN CHINA © 2024 Omnicharge. omnicharge® is a Registered trademark.
Product specifications are subject to change without notice or liability, whether to improve reliability, function, design, or for any other reason.

TROUBLESHOOTING

How to get in contact with us If your Power Station or portable charger encounters any technical problems or if you have any inquiries about your Power Station please contact us via: support@omnipower.co

Before getting in contact with us, please make sure to prepare the information below so that we can give the best service and track your inquiry accordingly.

The Station PI Address
The Station Serial Number
The Charger Serial Number
Purchasing information (Receipt, PO, Order ID.)

Where do find the PL address Number and Serial Number of your product?

Power Station:
Place the Power Station on one side, the PL address and Serial Number stickers are located at the bottom side.

Portable Charger:
Each Portable Charger is engraved with a Serial Number located on the backside.

You can also find the Serial Number of each Portable Charger in the About section of the menu.

For complete troubleshooting information, Omnicharge provides a forum and detailed FAQ page where you can find the most common inquiries: www.omnicharge.co/powerstation-faq

Scan to go to the troubleshooting page.

If you can’t find what you are looking for, please do not hesitate to contact us.

DISCLAIMERS

READ BEFORE USE
Acknowledgment: By using this product, you hereby confirm that you have thoroughly read and understood this manual, including all instructions, warnings, and safety information. Your use of the product constitutes your agreement to follow these guidelines and recommendations.

Warranty:
Please refer to our warranty at: https://www.omnicharge.co/pages/warranty-policy (the “Warranty”). Unless otherwise expressly agreed by us in writing, the Warranty constitutes our sole warranty to this product.

Warranty Limitations:
TO THE EXTENT PERMITTED BY LAW, THE WARRANTY AND THE REMEDIES SET FORTH THEREIN ARE EXCLUSIVE AND INSTEAD OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL, WRITTEN, STATUTORY, EXPRESS OR IMPLIED. OMNICHARGE DISCLAIMS ALL STATUTORY AND IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, QUIET ENJOYMENT, AND COMPATIBILITY.

Limitation of Liability:

EXCEPT AS PROVIDED IN THE WARRANTY AND TO THE MAXIMUM EXTENT PERMITTED BY LAW, (A) ON CHARGE OR ITS AFFILIATES ARE NOT RESPONSIBLE FOR INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOSS OF USE; LOSS OF REVENUE; LOSS OF ACTUAL OR ANTICIPATED PROF ITS (INCLUDING LOSS OF PROFITS ON CONTRACTS); LOSS OF THE USE OF MONEY; LOSS OF ANTICIPATED SAVINGS; LOSS OF BUSINESS; LOSS OF OPPORTUNITY; LOSS OF GOODWILL;
OR LOSS OF REPUTATION HOWSOEVER CAUSED, AND (B) UNDER NO CIRCUMSTANCES WILL OMNICHARGE’S AGGREGATE LIABILITY OF ALL KINDS ARISING OUT OF OR RELATED TO YOUR USE OF THE OMNICHARGE PRODUCT, REGARDLESS OF WHETHER ANY ACTION OR CLAIM IS BASED ON CONTRACT, TORT, OR OTHERWISE, EXCEED THE TOTAL AMOUNTS PAID YOU PAID TO ACQUIRE THE OMNICHARGE PRODUCTS. THE FOREGOING LIMITATION SHALL NOT APPLY TO DEATH OR PERSONAL INJURY CLAIMS, OR ANY STATUTORY LIABILITY FOR INTENTIONAL AND GROSS NEGLIGENT ACTS AND/OR OMISSIONS. OMNICHARGE DISCLAIMS ANY REPRESENTATION THAT IT WILL BE ABLE TO REPAIR ANY OMNICHARGE PRODUCT UNDER THIS WARRANTY. SOME STATES (COUNTRIES AND PROVINCES) DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

Environmental Compliance:
You are responsible for complying with local regulations for product disposal at the end of life. We are not liable for any harm due to improper disposal.

Use at Own Risk and Third-Party Products:
This product is designed for specific purposes as outlined in this manual and is intended for use with third-party products that meet the criteria and specifications described in the manual. We are not liable for any harm, loss, or damage resulting from use outside its intended purpose or contrary to this manual’s instructions. Modifications: To the extent that any disclaimers of warranties or limitations of liability outlined in this manual are not permissible underthe applicable laws of the user’s jurisdiction, such disclaimers and limitations shall be modified to preserve the intent of these provisions to the greatest extent permitted by the applicable laws.

www.omnicharge.co

Documents / Resources

omnicharge 40C+ Power Station [pdf] User Manual
40C Power Station, 40C, Power Station, Station

References

User Manual

omnicharge 40C+ Power Station

Product Usage Instructions