OMIX-ADA 11238.06 Diameter Flashlight Bracket Kit Installation Guide
Step 1: Locate a flat area with enough room to allow mounting of your flashlight. Be sure to space the 2 brackets far enough apart to secure your flashlight at each end.
Step 2: Once mounting location has been determined, mark the 4 holes to be drilled.
Step 3: Using a ¼” drill bit, drill the 4 marked holes.
Caution: Before drilling, be sure there is nothing behind the area being drilled that could possibly be damaged during drilling.
Step 4: Attach the flashlight brackets using the included phillips head screws and nuts.
Step 5: Place your flashlight into the brackets. Installation of your new 1 ½” flash light bracket kit is now complete.
Documents / Resources
 |
OMIX-ADA 11238.06 Diameter Flashlight Bracket Kit [pdf] Installation Guide 11238.06, 11238.06 Diameter Flashlight Bracket Kit, Diameter Flashlight Bracket Kit, Flashlight Bracket Kit, Bracket Kit, Kit |
