OliveTech LogoOliveTech Plug In Diffuser
User ManualOliveTech W2203 C Plug In Diffuser

Product Structure

OliveTech W2203 C Plug In Diffuser - Product

Operation Guide

  1. In the shutdown state, remove the top cover. (Fig1)
  2. Rotate clockwise to remove the essential oil bottle connected to the top cover.(Fig.2)
  3. Add essential oils to the bottle, then twist the bottle counterclockwise and tighten it onto the top cover. Not too tight to avoid damaging the sealing ring)
  4. Install the top cover onto the machine body while it is turned off. (Fig. 3)
  5. Operating the machine: (Fig. 4)
    1) Open the two pin plugs on the back of the machine and plug them into the power socket.
    2) Find the switch on the left side of the machine and you will notice three settings, When the switch is in the center, the machine will be set to “OFF You can choose the “HIGH” or “LOW” settings. The ‘HIGH’ setting will run for 30 seconds and stop for 2 minutes, and the cycle will repeat for 12 hours before automatically closing and then resuming after 12 hours. The LOW setting will run for 30 seconds and stop for 4 minutes. The cycle wil repeat for 12 hours, then automatically close and resume after 12 hours. Recommendation: Set on the low setting. 10ml of essential oil will last 9-10 days.)

OliveTech W2203 C Plug In Diffuser - Product 1

Cautions

  1. This scent diffuser is uniquely designed for fragrance oils without adding water.
  2. To ensure safety, we advise keeping diffuser out of your pet’s and child’s reach.
  3. Do not use the machine upside down, as it may cause leakage.
  4. Do not place the diffuser in high temperature or humid environment.
  5. Do not spill water or corrosive liquid on or inside the machine.
  6. Do not modify, disassemble or repair the machine at will, in case of failure, please contact our customer service or technical support in time.
  7. Do not fill with corrosive and high viscosity liquid in the bottle.
  8. Do not mixing different essential oils.
  9. Before changing the essential oil, it needs to wash the essential oil bottle and fill the bottle with purified water. Leave it on “high” for a period of time to clean the internal piping.
  10. When the machine is not in use for a long time, please keep it clean and dry. Before use, make sure it is clean.OliveTech W2203 C Plug In Diffuser - Product 2

Specifications

Dimensions: 3.1×2.6×5 inches
Power Input: AC100-240V 50/60Hz
Power: 5W
Materials: PP
Essential oil bottle capacity 10ml
Accessory: 2x10ml Essential Oil, 1x User Manual
Attention: How strong the scent is depends on the essential oils you use. purity and concentration of essential oils.
We spare no effort to provide the best customer service. If you have any questions, please feel free to contact us, so we can have the pportunity to improve your experience right away!
OliveTech W2203 C Plug In Diffuser - Icon Email: olivetech-service@hotmail.com
Or contact us directly via Amazon.com. Please click-“Your Orders”, find the order for this product, click-“Contact seller”, click-“Select”-“Other”, then send us an email.

Attention

  1. How strong the scent is depends on the essential oils you use. purity and concentration of essential oils.
  2. The longer spraying and the shorter the pause time, the stronger the fragrance will be.

Troubleshooting

Before requesting repair service, please refer to the guide below to diagnose and resolve the issue.

Issue Solution
No power Check that the power cord is firmly plugged into the outlet.
No diffusion Check mode settings, timer cycle, and reconnect or replace the air pump.
Weak diffusion Clean or replace atomizer; check gasket and tube connection.
Abnormal noise Retighten or replace the air pump.
No airflow/spray Reinstall oil bottle; press and test nozzle, clean if blocked.

OliveTech Logo

Documents / Resources

OliveTech W2203-C Plug In Diffuser [pdf] User Manual
W2203-C, W2203-C Plug In Diffuser, Plug In Diffuser, Diffuser

References

Leave a comment

Your email address will not be published. Required fields are marked *