OLIGHT logoUSER MANUAL

OLIGHT PL Turbo Valkyrie Weapon Mountable LED TorchPL TURBO VALKYRIE
800 Lumens LED WML for Long-range Illumination

IN THE BOX

OLIGHT PL Turbo Valkyrie Weapon Mountable LED Torch - IN THE BOX

Table 1: WML

SPECIFICATIONS

OLIGHT PL Turbo Valkyrie Weapon Mountable LED Torch - SPECIFICATIONS

* Above data are tested per ANSI/NEMA FL 1-2019 standard in Olight’s labs for reference.

Figure 1-1
Open the battery compartment
Figure 1-2
Remove the insulating film
OLIGHT PL Turbo Valkyrie Weapon Mountable LED Torch - Open the battery compartment OLIGHT PL Turbo Valkyrie Weapon Mountable LED Torch - Remove the insulating film
Figure 1-3
Close the battery compartment
Figure 2
Battery installation
OLIGHT PL Turbo Valkyrie Weapon Mountable LED Torch - Close the battery compartment OLIGHT PL Turbo Valkyrie Weapon Mountable LED Torch - Battery installation
Figure 3-1
Screw off
Figure 3-2
Adjust the installation position of the light
OLIGHT PL Turbo Valkyrie Weapon Mountable LED Torch - Screw off OLIGHT PL Turbo Valkyrie Weapon Mountable LED Torch - position of the light
Figure 3-3
Screw on
Figure 4
Turn the light on/off
OLIGHT PL Turbo Valkyrie Weapon Mountable LED Torch - Screw on OLIGHT PL Turbo Valkyrie Weapon Mountable LED Torch - Turn the light on off
Figure 5
Momentary on
Figure 6
Strobe
OLIGHT PL Turbo Valkyrie Weapon Mountable LED Torch - Momentary on OLIGHT PL Turbo Valkyrie Weapon Mountable LED Torch - Strobe

Multi-language dictionary, see Table 2;

  1. See Table 1 for product parameters;
  2. Remove transport protection film:
    2.1 Open the battery compartment, see Figure 1-1;
    2.2 Remove the insulating sheet, see Figure 1-2;
    2.3 Close the battery compartment, see Figure 1-3;
  3. Battery replacement, see Figure 2;
  4. Rail mounted light installation:
    4.1 Loosen the screw, see Figure 3-1;
    4.2 Adjust the installation position of the rail mounted light, see Figure 3-2;
    4.3 Tighten the screw, see Figure 3-3;
  5. The operating instructions are as follows:
    5.1 Turn on/off the rail mounted light, see Figure 4;
    Quickly single press (press and then quickly release) any key, the output will stay lit. Click the button again and the output turns off.
    5.2 Momentary on, see Figure 5;
    Press any button and hold, output turns on when pressed and off when released.
    5.3 Strobe, see Figure 6;
    When the two buttons are pressed simultaneously, strobe mode will be activated. The strobe will continue when the buttons are released. Press any button to turn off the strobe.

Table 2
Multi-language dictionary

Press
Press and hold
Momentary on
Strobe
Push
Slide
Screw off
Screw on
Press both buttons
Open the battery compartment
Close the battery compartment
Remove the insulating film
Battery installation

WARRANTY

Within 30 days of purchase: Contact the original seller for repair or replacement.
Within 5 years of purchase: Contact Olight for repair or replacement.
This warranty does not cover normal wear and tear, modifications, misuse, disintegrations, negligence, accidents, improper maintenance, or repair by anyone other than an authorized retailer or Olight itself.

USA Customer Support: cs@olightstore.com
Global Customer Support: contact@olightworld.com
Visit www.olightworld.com to see our complete product line of portable illumination tools.

OLIGHT logoDongguan Olight E-Commerce Technology Co., Ltd
4th Floor, Building 4, Kegu Industrial Park, No 6 Zhongnan Road,
Changan Town, Dongguan City, Guangdong, China.
Made in ChinaOLIGHT PL Turbo Valkyrie Weapon Mountable LED Torch - Symbol 1

Documents / Resources

OLIGHT PL Turbo Valkyrie Weapon Mountable LED Torch [pdf] User Manual
PL Turbo Valkyrie Weapon Mountable LED Torch, PL Turbo, Valkyrie Weapon Mountable LED Torch, Weapon Mountable LED Torch, Mountable LED Torch, LED Torch, Torch

References

Leave a comment

Your email address will not be published. Required fields are marked *