Product specification, see Table 1 and Table 2;
Operating instructions as below:
 Product appearance, see Figure 1;

Before first use, please charge the product to unlock it, see Figure 2;
Charge to unlock the product before first use.

Two switching options, see Figure 3;

The switch is at the bottom of the product. Press the bottom switch or the top of the light  ball (when the product is placed on a hard surface) to operate the product.
On, see Figure 4;

When the light is off, press or double press to turn on.
Off, see Figure 5;

When the light is on, double press to turn off.
Mode Switching, see Figure 6;

When the light is on, press to switch modes, and the output cycles through the following modes: White light->Static color ->Dynamic color 1->Dynamic color 2->Dynamic color 3->Dynamic color 4->Dynamic color 5->Red flash-> Power off -> White light Release to select the desired mode.
Change brightness level (Non-static Color Mode), see Figure 7;

When the light is on, press and hold to change the brightness level steplessly.
 Adjust Color, see Figure 8;

In the Static color mode, press and hold to adjust the color. Release to select the desired color.
 Turn on White light Low, see Figure 9;

When the light is off, press and hold to enter the default White light low.
10 Lock/unlock, see Figure 10;

Lock: When the light is off, press and hold for 2 seconds until the default White light low is  turned on and off.
Unlock: Press and hold for 1 second until the White light is on.
Battery Indicator, see Figure 11;

Green: 50%~100%; Yellow: 10%~49%; Red: < 10%;
Application of adhesive metal badge, see Figure 12