Contents
hide
OLG Modulus All Black Flip Table Installation Guide
MODULUS FILP TABLE
Installation Guide
- To prevent possible scratches or damage, assemble the table upside down on a soft surface such as a blanket, carpet or
- Attach Leg to the Top assembly by using Bolts, spring washer, flat washer. Tighten using the Allen Wrench
Recommended 2-person Step
STEP 1: Place the pull bar (a) and cross tube (b) in the correct location pictured above, slide the 2 end legs in place
STEP 4: Fully tighten all 6 screws on each mechanism.
STEP 5: On all tables with width larger than 700mm, secure the pull bar with the supplied washer and screw in the location pictured above (slot end closest to the pull-bar). Leave screw 1 turn from tight so the pull-bar can be operated smoothly
COMPLETE: Using 2 people rotate table into upright position.
MODULUS FILP TABLE – CONNECTORS/LINKS
Installation Guide
Drilling Patterns for Optional Connectors/Links
MODULUS FLIP TABLE
Installation Guide
Drilling Patterns for Modulus/Uni Flip Tables Mechanism & Pull Bar
Width-600mm
| 1200mm | 796 | 96 | NA |
| 1500mm | 1096 | 96 | NA |
| 1800mm | 1396 | 96 | NA |
Width-750mm
| 1200mm | 796 | 171 | 100 |
| 1500mm | 1096 | 171 | 100 |
| 1800mm | 1396 | 171 | 100 |
Width-900mm
| 1200mm | 796 | 246 | 175 |
| 1500mm | 1096 | 246 | 175 |
| 1800mm | 1396 | 246 | 175 |
Read More About This Manual & Download PDF:
Documents / Resources
 |
OLG Modulus All Black Flip Table [pdf] Installation Guide Modulus_Flip_Table, Modulus All Black Flip Table, Modulus, All Black Flip Table, Flip Table |