OCTOPUS Bloom 740w 3D Printer

Brand Story

• OCTOPUS WORKS is a company specializing in 3D printing additive manufacturing. Relying on long-term in-depth communication with users. we deeply understand that numerous problems and challenges faced by users in the usage of 3D printing technology may hinder the successful presentation of ideas.
• OCTOPUS WORKS strives to become users’ best partner in the process of creating ideas, assisting them to solve problems during the usage of 3D printing and smoothly transforming their imagination into real achievements.

We believe that close cooperation with users can help create a colorful world that is dominated by digitization and supplemented by visual information. thereby making 3D printing technology reach its full potential.

Printer Parameters

Usage of Magic Pen Slicer Software

1. Select Model: Click “File” to open the model file. If the file is damaged, you can click Auto Repair File;
2. Adjust the Model Size, Click “Zoom”, and then click the “Lock Scole” button in the right interface to adjust the model to a desired size based on the scale;
3. Model Support. Click “Support” on the lop of the model after determining the model size, find out and click the “Dangling Detection” button in the upper left corner, and click OK in the right interface to start detection. After detection, click “Auto Support” in the upper left corner:
4. Slicing, After confirming the support. click “Slice” on the top of the model. If you need to set the slice parameters, click on the Slice Settings to make an adjustment and save the settings, and then click OK on the right interface to start slicing. After slicing is complete. click the Save icon in the upper left corner, confirm the print preview, and finally click to save the document.

First Print Operation

1. Save the .zyslr/.zip file generated from the model to a USB flash drive.
2. Insert the USB flash drive and wait until the USB Flash Drive Inserted pop-up window is shown on the screen:
3. Click the USB flash drive icon, select the file, click the model file, select the equipment parameter, and start printing.

Notes:

1. If you want to customize parameters, please set up parameters when slicing the model, and then choose to click the file parameters when printing;
2. If you want to pause the printing to check the printing situation, you can click “Pause”, and then click “Start” to continue to print;
3. If you want to cancel the print, you can directly press “Stop” and then confirm to cancel the print.

Cloud Platform Instructions

1. Download the Octopus Core APP, open the workbench of the APP, add the printer, and bind it to the phone (Note: please make sure that the phone and the printer use the same WiFi);
2. Ater confirming the success of device binding, select the device, and then import a file to conduct slice processing online;
3. After the file processing, choose to start printing, and you can enter the workbench to monitor the print progress at any time.

Operation After Printing

Note:
When removing the model, please ensure that you do not cause any harm to the NFEP film or LCD panel at the bottom of the resin tray.

FCC STATEMENT

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Conned the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Documents / Resources

OCTOPUS Bloom 740w 3D Printer [pdf] User Manual 1000001001P, 2BEBL1000001001P, Bloom 740w 3D Printer, Bloom 740w, Bloom 740w Printer, 3D Printer, Printer

References

• User Manual