NYLAVEE SK400 Computer Speaker

SPECIFICATION

HOW TO OUICKLY GET START

- Get Audio Input
Plug the audio cable into the 3.5mm port of your audio output device. - Get Power Supply
Plug the USB cable into a suitable adapter or power port on your device. - Get Audio Input for Subwoofer
Plug the RCA cable into the subwoofer port - Power On 1 Off
Turn the knob clockwise to power on the speaker with RGB light on. Turn the knob counterclockwise to the end to power off with RGB light off. - Volume Control
Rotate the knob to control the volume of speaker. (Note: The volume of the audio device needs to be adjusted separately.)
- Light Control
Touch the light button to switch RGB light mode from 6 choice: Symphony / Flow / Breathing / Solid Color x 3. Touch the light button for 3 seconds to turn off or turn on the light again.
TROUBLE SHOOTING
Get trouble with no sound (first use or currently in use):
- Step 1: Check that the audio output setting on the device has been switched to external speakers and is not disabled. (If you have no idea how to set up your device, please contact us with your device brand and model)
- Step 2: Rotate the knob to adjust volume or restart the speaker.
- Step 3: Replug the USB and 3.5mm audio cables.
- Step 4: Change different devices (eg. another PC) to check for audio output compatibility of the device.
Get trouble with static noise:
- Step 1: Try to play different audio files to see if it’s a quality issue of the file.
- Step 2: Change different power adapters to check for current interference.
- Step 3: Change different devices (eg. another PC) to check for audio output compatibility of the device.
If none above works, please contact us for assistance via support@nylavee.com
WARRANTY AND SERVICE
- 30 days free return and exchange.
- 18 months warranty.
- Lifetime customer service.
- For more detail and further instruction, please contact us via support@nylavee.com
- Extend 2-year warranty at www.nylavee.com
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must withstand any interference received, including interference that may cause undesired operation.

Documents / Resources
![]() | SK400 Computer Speaker |
References
- User Manualmanual.tools
Published: October 30, 2025
