SMARTRISE VERSION 1.03 C4 LINK2 PROGRAMMER

Zofotokozera

• Dzina lazogulitsa: Pulogalamu ya C4 Link2
• Mtundu: 1.03
• Tsiku: Novembala 7, 2025

Zathaview

• Chikalatachi chimapereka malangizo atsatane-tsatane pakutsitsa, kukhazikitsa, ndi kugwiritsa ntchito Link2 Programmer yokhala ndi olamulira a C4. Imafotokoza momwe mungayikitsire mapulogalamu pa C4 controller pogwiritsa ntchito Link2 Programmer.

Zida Zofunikira pa Mapulogalamu a Mapulogalamu

Zida zotsatirazi ndizofunika kupanga pulogalamuyi:

1. Laputopu yokhala ndi makina ogwiritsira ntchito Windows.
2. Pulogalamu ya Link2.
3. Controller software: The original controller software is stored on a flash drive inside the white job binder. If the flash drive is missing or contains outdated prints and software, Smartrise can provide a webulalo kuti mupeze mapulogalamu aposachedwa ndi zosindikiza.

Ntchito Download Malangizo

Kuti mutsegule pulogalamu pa Smartrise controller, pulogalamu yamapulogalamu iyenera kutsitsidwa ku laputopu. Pulogalamuyi imapezeka pa flash drive. Tsatirani izi kuti mutsitse pulogalamu ya C4 Link2 Programmer:

1. Tsegulani flash drive.
2. Navigate to (5) – Smartrise Programs and open the folder.
3. Pezani ndi kutsegula chikwatu cha C4 Programmer.
4. Tsitsani ndikuyendetsa mapulogalamu onse awiri pa laputopu. Ma laputopu ena amatha kukhala ndi zozimitsa moto zomwe zimalepheretsa mapulogalamu kutsitsa. Kuti muthandizidwe, funsani woyang'anira dongosolo.
5. Mukamaliza, mapulogalamu awiriwa ayenera kuwonekera pa desktop.
   ZINDIKIRANI: MCUXpresso sikuyenera kutsegulidwa, kungoyika pa laputopu.

Mapulogalamu Otsitsa Malangizo

Kuti muwonetsetse kugwira ntchito moyenera, pulogalamu yowongolera iyenera kukwezedwa pawowongolera wa Smartrise pogwiritsa ntchito Link2 Programmer. Tsatirani zotsatirazi kuti mumalize ntchitoyi:

1. Lumikizani Link2 Programmer ku laputopu kudzera pa doko la USB.
2. Tsegulani C4 Link2 Programmer podina kawiri chizindikiro chake. Pulogalamuyi imangosintha kukhala mtundu waposachedwa ngati ilumikizidwa ndi intaneti. Onetsetsani kuti ntchitoyo ndi yaposachedwa musanapitilize.
3. Sakatulani pulogalamu yowongolera:
   • Tsegulani (1) - Pulogalamu Yoyang'anira.
   • Sankhani chikwatu chokhala ndi dzina lantchito.
   • Sankhani Galimoto kuti mulowetse mapulogalamu.
   • Dinani Sankhani Foda pansi pa zenera.
4. Sankhani purosesa kuti musinthe pogwiritsa ntchito menyu yotsitsa. Ma processor atha kusinthidwa mwanjira iliyonse:
   • MR A: MR MCUA
   • MR B: MR MCUB
   • SRU A: CT ndi COP MCUA
   • SRU B: CT ndi COP MCUB
   • Riser/Kukula: Riser/Expansion board
   • Kulumikizana kwa processor kungapezeke pa bolodi.
5. Yambitsani pulogalamu yotsitsa pulogalamuyo podina batani loyambira.
   • Zofunika: Pokonza MR SRU, magalimoto ena mugulu angakhudzidwe. Kuti mupewe izi, chotsani ma terminals a gulu pa bolodi.
6. Zenera latsopano lidzawonekera, ndipo kutsitsa kwa mapulogalamu kudzayamba. Mukamaliza, uthenga wotsimikizira udzawonetsedwa.ZINDIKIRANI: Ngati pulogalamuyo ikulephera kutsitsa, yesani izi:
   • Yesaninso ndondomekoyi.
   • Gwiritsani ntchito doko la USB lina.
   • Mphamvu yozungulira chowongolera.
   • Onetsetsani kuti Link2 Programmer yolumikizidwa bwino.
   • Yambitsaninso laputopu.
   • Yesani pulogalamu ina ya Link2.
   • Gwiritsani ntchito laputopu ina.
   • Lumikizanani ndi Smartrise kuti muthandizidwe.
7. Dinani Sinthani kuti mupitilize kutsitsa mapulogalamu a mapurosesa otsala ndikutsatira njira zam'mbuyomu.
8. Kuyika kwa mapulogalamu onse kukatha, gwirizanitsaninso ma terminals a gulu ndikuwongolera mphamvu.
9. Tsimikizirani mtundu wa pulogalamuyo pansi pa Main Menu | Za | Mavesi.
10. Mpukutu pansi mpaka view zosankha zonse ndikutsimikizira zomwe zikuyembekezeredwa zikuwonetsedwa.
    • DZINA LA NTCHITO
    • SRU BOARD
    • CAR LABEL
    • JOB ID: ########
    • VERS. ##.##.##
    • © 2023 SMARTRISE
11. Default to factory settings by navigating to Main Menu | Setup | Miscellaneous | Default | Default Factory.

Restoring a Bricked Processor

In the event of a bricked processor, follow the steps below to restore functionality:

1. Locate the two jumpers positioned beneath the LCD display – one jumper corresponds to each processor.
2. Connect the jumper associated with the affected (bricked) processor to establish communication.
3. Power cycle the board.
4. Once power is restored, program the processor using a release file that already includes a bootloader.
5. Start the application once programming is complete.
6. Remove the jumper used for recovery.
7. Power cycle the board again to finalize the restoration.

FAQs

Q: What should I do if I encounter issues with downloading the programming application?

A: If you face problems downloading the programming application due to firewalls or other reasons, contact your system administrator for assistance.

Zolemba / Zothandizira

SMARTRISE VERSION 1.03 C4 LINK2 PROGRAMMER [pdf] Buku Logwiritsa Ntchito VERSION 1.03 C4 LINK2 PROGRAMMER, VERSION 1.03, C4 LINK2 PROGRAMMER, LINK2 PROGRAMMER, PROGRAMMER

Maumboni

• Buku Logwiritsa Ntchito