LSI-LASTEM DISACC210034 Compact and Versatile Data Logger

Zofotokozera

• Miyeso: 76 x 50 mayunitsi
• Kutentha kwapakati: 23 ° C mpaka 115 ° C
• Mphamvu: 355 mayunitsi
• Kulemera Kwambiri: Mayunitsi 500

Malangizo Ogwiritsira Ntchito Zogulitsa

Kuyika:

• Tsatirani chiwongolero chokhazikitsa choperekedwa mu bukhu la osuta lomwe latsitsidwa kuchokera ku webmalo WWW.LSI-LASTEM.COM.

Kutentha kwa Ntchito:

• Onetsetsani kuti kutentha kwa ntchito kuli mkati mwa 23 ° C mpaka 115 ° C kuti agwire bwino ntchito.

Zofunika Mphamvu:

• Lumikizani chinthucho ku gwero lamagetsi lokhala ndi mphamvu zosachepera mayunitsi 355.

Katundu:

• Musapitirire kuchuluka kwa katundu wa mayunitsi 500 kuti mupewe kuwonongeka kwa chinthucho.

Kusaka zolakwika:

• Ngati mukukumana ndi zovuta zilizonse, onani buku la ogwiritsa ntchito kuti muthe kuthana ndi zovuta kapena funsani thandizo lamakasitomala.

FAQ

• Q: Kodi ndingatsitse kuti buku la ogwiritsa ntchito?
  • A: Mukhoza kukopera wosuta Buku kuchokera webmalo WWW.LSI-LASTEM.COM.
• Q: Kodi kuchuluka kwa katundu wamtunduwu ndi kotani?
  • A: Zogulitsazo zimakhala ndi katundu wambiri wokwanira mayunitsi 500. Osadutsa malire awa.

Chitetezo

General malamulo chitetezo

Chonde werengani malamulo otsatirawa otetezedwa kuti mupewe kuvulala kwa anthu komanso kupewa kuwonongeka kwa zinthu kapena zinthu zomwe zingagwiritsidwe ntchito pokhudzana nazo. Pofuna kupewa kuwonongeka, gwiritsani ntchito mankhwalawa motsatira malangizo omwe ali pano.

Kuyika ndi kukonza zinthu kuyenera kuchitidwa ndi anthu ovomerezeka komanso aluso okha.
Ikani chida pamalo aukhondo, owuma komanso otetezeka. Chinyezi, fumbi komanso kutentha kwambiri kumatha kuwononga kapena kuwononga chidacho. Zikatero, timalangiza kukhazikitsa chida mkati mwa chidebe choyenera.

Mphamvu chida m'njira yoyenera. Lumikizani chidacho ku magetsi omwe asonyezedwa mu chitsanzo chomwe muli nacho.
Chitani zolumikizira zonse m'njira yoyenera. Samalani kwambiri pazithunzi zolumikizira zomwe zimaperekedwa ndi chidacho.
Osagwiritsa ntchito mankhwalawa ngati akukayikira kuti sakuyenda bwino. Ngati mukuganiziridwa kuti sakugwira ntchito bwino, musagwiritse ntchito chida; funsani thandizo laukadaulo lovomerezeka nthawi yomweyo.
Kukonzekera kulikonse kolumikizira magetsi, magetsi, masensa ndi zida zamakompyuta:
- kuletsa magetsi,
- tulutsani ma electrostatic discharges pokhudza kondakitala imodzi kapena zida zapadziko lapansi.
Osagwiritsa ntchito mankhwala pamaso pa madzi kapena condensing chinyezi.
Osagwiritsa ntchito mankhwalawa m'malo omwe atha kuphulika.

Batri ya lithiamu yamkati. Osasintha batire ndi mtundu wolakwika. Chiwopsezo chotheka kuphulika.

Mawu oyamba

M-Log datalogger yapangidwa kuti igwiritsidwe ntchito zachilengedwe; imachokera ku E-Log makamaka ndipo imagwiritsa ntchito njira zomwezo komanso mapulogalamu oyang'anira (3DOM, Gidas ...) Chifukwa chakugwiritsa ntchito mphamvu pang'ono, kukula kwake, kuchuluka kwa ma siginecha omwe angalandire, kutetezedwa kuzinthu zachilengedwe komanso kuchulukira komwe kungatheke.tages, M-Log datalogger ndiyoyenera makamaka kuyeza nyengo, madzi, mtundu wa mpweya, ntchito zowunikira mkati ndi kunja.

Mzere wa M-Log wagawidwa m'mitundu iwiri yayikulu (mutha kupeza mndandanda watsatanetsatane wamitundu mu §3.2):

 M-Log yokhala ndi zolowetsa zoyenera kulandila masensa okhala ndi zolumikizira kuti azitha kukhazikika mwa kukana kuzindikira; ndizoyenera kugwiritsa ntchito m'nyumba (microclimate).
 M-Log yokhala ndi zolowetsa za board board; ndizoyenera ntchito zakunja (zanyengo). M-Log imatha kukhala ndi zida zambiri zowonjezerera mphamvu zake, kuiteteza ku nyengo yoipa komanso kutumiza ma data kudzera pa RS232/485, USB, Efaneti, modemu PSTN/GSM/GPRS.

2.1 Kutaya

M-Log ndi chipangizo cha sayansi chamagetsi kwambiri. Mogwirizana ndi miyezo ya chitetezo ndi kusonkhanitsa chilengedwe, LSI LASTEM imalangiza kusamalira M-Log ngati kuwononga zida zamagetsi ndi zamagetsi (WEEE). Choncho sayenera kusonkhanitsidwa ndi zinyalala zamtundu wina uliwonse. LSI LASTEM ili ndi udindo wotsatira kupanga, kugulitsa ndi kutaya kwa M-Log, kuteteza ufulu wa ogula. Kutaya kosaloledwa kudzalangidwa ndi lamulo. Tayani mabatire akufa motsatira malamulo omwe akugwira ntchito

2.2 Momwe mungalumikizire LSI LASTEM

Pakakhala zovuta funsani thandizo laukadaulo la LSI LASTEM pa support@lsi-lastem.it, kapena lembani
Fomu yofunsira thandizo laukadaulo pa intaneti ikupezeka patsamba loyambira la webtsamba www.lsilatem.it.

Kuti mudziwe zambiri:

Foni +39 02 95.414.1
 Adilesi Kudzera ex SP 161 - Dosso n. 9 – 20090 Settala Premenugo, Milano
 Tsamba loyamba www.lsi-lastem.it
 Zogulitsa info@lsi-lastem.it
 Ntchito yogulitsa pambuyo pogulitsa support@lsi-lastem.it, riparazioni@lsi-lastem.it

Chitsogozo choyambira

3.1 Kufotokozera

M-Log ndiwotsogola wotsogola wopangidwa ndi LSI LASTEM, ndipo chifukwa cha miyeso yake yambiri ndiyoyenera kugwiritsa ntchito chilengedwe chonse. Mbali yakutsogolo ya chida ili ndi chiwonetsero chowunikira (zilembo 4 × 20), zowonetsa ma LED owala, ntchito ndi makiyi a mivi.

Pamwamba pa chida pali zida zoyankhulirana (malinga ndi chitsanzo: serial port kapena Ethernet linanena bungwe), Reset kiyi, socket yolumikizira magetsi akunja. Pansi pansi titha kupeza zolowetsa zolumikizira masensa; molingana ndi mtundu wa M-Log, polumikizana ndi masensa, ndizotheka kupeza zolumikizira za mini-din (zitsanzo mndandanda wa ELO009), kapena bolodi lokhazikika lomwe lili ndi ma terminals pluggable; pomaliza amachotsa ma terminals m'nyumba zawo pogwiritsa ntchito chida choyenera.

Pa gulu lakumbuyo la chida pali chizindikiro chomwe chimanyamula, kuwonjezera pa chidziwitso chokhazikika chamagetsi ndi mawonekedwe a wailesi, komanso chidziwitso chotsatira:

- M-Log chitsanzo;
- Nambala ya serial ya chida (nambala yodziwika bwino yokhala ndi manambala 8 omwe amalemba cholembera chilichonse);
- adilesi ya MAC yamitundu ELO007, yokhala ndi zotulutsa za Ethernet;
- Malo aulere ofotokozera masanjidwe omwe amagwiritsidwa ntchito ndi kulumikizana kwawo ndi masensa olumikizidwa ndi datalogger.

Zithunzi za 3.2

Mitundu yonse ya M-Log ili ndi mawonekedwe a alphanumeric, kiyibodi ndi batire yamkati; katundu wawo wosiyanitsa ndi awa: mitundu yosiyanasiyana ya zolowetsa ndi kukhalapo kwa zipangizo zosiyanasiyana zoyankhulirana.

Kodi
Mphamvu
kupereka
12 ndi
Cholumikizira
zolowetsa
Pokwerera
bolodi
zolowetsa
Siriyoni imodzi
doko
Awiri siriyo
madoko
Efaneti
zotuluka
ELO007 X - XX - X
ELO008 X - X - X -
ELO009 XX - X -
ELO011 X - X - X -
o ELO007: zolowetsa za board terminal, doko limodzi la serial ndi kutulutsa kwa Ethernet;
o ELO008: zolowetsa za board terminal, madoko awiri osalekeza;
o ELO009: zolowera cholumikizira, madoko awiri siriyo;
o ELO011: zolowetsa zocheperako za bolodi, madoko awiri osakanikirana.4

3.3 Kuyika kwa makina ndi magetsi
M-Log imatha kugwiritsidwa ntchito zonse zamkati (kuyikidwa pamalo athyathyathya okhazikika pakhoma) ndi
kugwiritsa ntchito kunja (mkati mwa mabokosi otetezedwa oyenera).
Kugwiritsa ntchito zothandizira zoperekedwa ndi LSI LASTEM ndikoyenera pazofunsira zamkati:
BVA304 Universal tripod kuthandizira BVA311 stand
BVA311 Imani kuthandizira ma probes a n.5 ndi M-Log pa tripod kapena pakhoma
BVA312 Imani kuthandizira ma probes ena a n.5 ndi M-Log pa BVA311 kapena pakhoma
BVA314 Sidebar yothandizira kuyimirira pakhoma

3.3.1 Mphamvu zamagetsi zamagetsi

M-Log ili ndi 1,95 A, lithiamu ion, batire yowonjezedwa mkati. Mitundu yonse imatha kuyendetsedwa ndi paketi yamagetsi yakunja (8 ÷ 14 Vdc), pogwiritsa ntchito cholumikizira choyikidwa pamwamba pa chida; pamenepa mtengo wabwino ndi mzati mkati mwa cholumikizira. Mulimonsemo, samalani kuti musatembenuze polarity yamagetsi (ngakhale chidacho chikutetezedwa ku njira zolakwika).

Pamitundu ya ELO007 ndi ELO008 ndizothekanso kugwiritsa ntchito ma terminal board.
Yang'anani pa tebulo ili m'munsimu kuti mulumikizidwe ndi zolowetsa zida ndi masensa-output powersupply terminals kapena zida zina zomwe zimafunikira magetsi.

Connection Terminal

0 Vdc batire 28 kapena 29
+ Vdc batire / + Vdc yokhazikika ku masensa amphamvu ndi zida zakunja 30 kapena 31

Mtengo wa GND32

Pamene pali GND waya (grounding), tikulimbikitsidwa kulumikiza ndi 32 terminal. Ngati palibe kusintha kwa chipangizocho, kanikizani batani la RESET (lomwe lili pamtunda wapamwamba wa chida) ndiyeno yesani kukankhira makiyi ophatikizana kuti muyatse; ngati sensa ikadali yozimitsa, tumizani kuti ikonzedwe ku LSI LASTEM.

CHENJEZO: ngati ma terminals 5-6 ndi 16-17 adyetsa zida zakunja, amayenera kukhala ndi magetsi akulephera kuzungulira mabwalo amfupi kapena mafunde olowera pamwamba pa 1 A.
CHENJEZO: m'mapulogalamu omwe muli LSI LASTEM BSO103.1 sensor (CO2 probe), M-Log datalogger iyenera kuyendetsedwa ndi paketi yamagetsi yakunja; batire yokhayo ya mkati ya M-Log sikutha kupereka mphamvu zokwanira kuti igwire bwino ntchito ya sensa yolumikizidwa.

3.3.2 Batire yowonjezeredwa mkati

Batire yowonjezereka yamkati imatsimikizira kuti chidacho chidziyimira pawokha, kudziyimira pawokha komanso kusagwira ntchito pazantchito zosiyanasiyana zomwe zikukhudza; nthawi zambiri imatha kutsitsa. Kutsikitsitsa kwa batire kumachitika pa datalogger kudzera pakuthwanima katatu kwa LED ▄-Err (onani §Errore. L'origine riferimento non è stata trovata.).

Kutulutsa kwathunthu kwa batri kudzataya tsiku / nthawi ya datalogger; chikhalidwechi ndi choopsa kwambiri chifukwa chimapangitsa kuti deta yosungidwa ikhale yosawerengeka komanso kusokoneza ntchito yotsitsa deta ndi kusunga deta pa dongosolo lopeza.

Zindikirani: Ndibwino kuyang'ana tsiku/nthawi yowonetsedwa ndi wolota datayo kenako n'kusintha mpaka tsiku/nthawi yamakono kudzera pa pulogalamu ya 3DOM (onani §4.5.2 ya SWUM_00339 buku la LSI

LASTEM mankhwala DVD MW6501):

- musanayambe kufufuza;
- isanayambe kapena itatha ntchito yowonjezeretsa batire;
- pambuyo pa nthawi yayitali yosagwira ntchito;
– pamene uthenga wa batire yotsika ukuwonetsedwa (onani §Errore. L'origine riferimento non è state trovata.).

3.3.3 Zolowetsa ndi zoyambitsa

Zithunzi za 3.3.3.1 ELO007-ELO008-ELO009

Chidacho chili ndi zolowetsa 4 za analogi munjira yosiyanitsira ndi 8 munjira yomaliza imodzi (§3.3.4Errore. L'origine riferimento non è stata trovata.) (wodziimira, wa sampling wa voltage zizindikiro, zamakono, kukana, Pt100 ndi mawaya atatu kapena anayi, thermocouples), kulowetsa kwa digito (kwa sampzolowetsa za pulse, ma frequency kapena digito) ndi ma actuators 2 omwe amagwiritsidwa ntchito kupatsa mphamvu masensa olumikizidwa ndi board board; ma actuators angagwiritsidwenso ntchito ndi ma actuation programmable logics, kuposa momwe angatulutsire ma alarm molingana ndi zomwe zimapezedwa ndi masensa. Voltage kupezeka pamaterminals kumadalira mtundu wamagetsi omwe alandilidwa ndi chida. Gwiritsani ntchito pulogalamu ya 3DOM (onani SWUM_00339 yomwe ikupezeka pa LSI LASTEM product DVD - MW6501) kuti mukonze ntchitoyi kuti muyatse masensa pogwiritsa ntchito mphamvu zosinthira. Kuti musankhe nthawi yoyambira, ndikofunikira kuti muganizire kupulumutsa mwachangu komanso nthawi yomwe sensor ikuyenera kuyambitsa.

Chiyanjano pakati pa kulowetsa ndi kusintha mphamvu kumakhazikika, monga momwe tawonetsera mu tebulo ili m'munsimu. Nambala ya terminal ikuwonetsedwa mu zilembo zopendekera; timamvetsetsa, mwachitsanzoample, kuti zolowetsa 1 ndi 2 zonse zimagwiritsa ntchito choyambitsa choyamba; chifukwa chake sichingagwiritsidwe ntchito pazolowetsa zina. Pankhani ya masensa omwe amapanga zizindikiro ziwiri (monga sensa ya thermo-hygrometric), ndizoyenera kusankha zolowetsa zonse zomwe zimagwiritsa ntchito actuator yomweyo.

Chothandizira chachitatu chili pa pin9 ya cholumikizira doko 1 ndipo chitha kugwiritsidwa ntchito ngati masensa omwe amalumikizana ndi M-Log ndi kulumikizana kwa serial; ngati ikonzedwa moyenera ndi logic yotengera mphamvu yamagetsi kapena mulingo wa mphamvu ya batri, imatha kugwiritsidwa ntchito ngati magetsi osakhazikika. Ma actuators onse amatha kuyendetsedwa pamanja ndi zenera lamtundu wa 4 (onani §4.3.4).
Matebulo otsatirawa akuwonetsa ma terminals omwe amagwiritsidwa ntchito kulumikiza masensa ndi magetsi amitundu ya ELO007 ndi ELO008.

TERMINAL BODI
Analogi
kulowa
Signal GND Actuator
Nambala ya ABCD +V 0 V
1 1 2 3 4
7 1 5 6

3 8 9 10 11 23 2 21 22
4 24 25 26 27
Za digito
kulowa
Chithunzi cha GND
EFG
5 12 13 14 15 kapena 16
Kutulutsa kwa Actuator / Alamu pa cholumikizira cha serial
+ V0 V
Pin 9 pin 5

Zithunzi zotsatirazi zikufotokozera mwatsatanetsatane kugwirizana kwa mitundu yonse ya masensa, onse analogue ndi digito.

Zomverera zokhala ndi chizindikiro cha analogi (munjira yosiyanitsira):

Kukana kwa dontho, kosonyezedwa ndi Rx, kumagwiritsidwa ntchito kubwezera voltage chizindikiro kuchokera pakali pano chopangidwa ndi sensa. Pulogalamu 3DOM imapereka laibulale yokhazikitsira masensa a LSI LASTEM, kuphatikiza zotulutsa zina zoyendetsedwa; pamitundu yotere makonda adakonzedwa kuti agwiritse ntchito sikelo yamphamvu -300÷1200 mV, motero amatha kugwiritsa ntchito 50 Ω drop resistance.

Zomverera zokhala ndi chizindikiro cha digito:

Chithunzi cha 3.3.3.2 ELO011

Chidacho chimayikidwa ndi digito (ya sampLing of pulse inputs, frequency or digital state) ndi actuator yomwe imasintha magetsi pa pini 9 ya cholumikizira cha serial port 1. The actuator ingagwiritsidwe ntchito kwa masensa omwe amalumikizana ndi M-Log ndi serial kugwirizana; ngati ikonzedwa moyenera ndi malingaliro otengera mphamvu yamagetsi kapena mulingo wa mphamvu ya batri, imatha kugwiritsidwa ntchito ngati mphamvu yokhazikika ndi chipangizo cholumikizidwa.

Matebulo otsatirawa akuwonetsa ma terminals omwe amagwiritsidwa ntchito kulumikiza masensa ndi magetsi.

Za digito
kulowa

Chithunzi cha GND
EFG
5 12 13 14 15 o16
Kutulutsa kwa Actuator / Alamu pa cholumikizira cha serial
+ V0 V
Pin 9 pin 5
Sensori con segnale digitale:

3.3.4 Zolowetsa zamtundu umodzi

Kuyambira ku datalogger firmware version 2.10.00 (chitsanzo ELO011 sichinaphatikizidwe) ndizotheka kuwirikiza kawiri chiwerengero cha zolowetsa analogue, kudutsa 4 mpaka 8. Ntchitoyi imapezeka kokha kwa masensa omwe ali ndi zizindikiro zamakono (ntchitoyi imatchedwa imodzi yokha). Zizindikiro zotsutsa, m'malo mwake, pitirizani kugwiritsa ntchito mphamvu imodzi yokha (ntchitoyi imatchedwa kusiyana). Zolowetsa zosiyana ndizotetezedwa kwambiri ndi kusokonezeka kwa ma elekitiromu kuposa zomaliza ndipo, ngati kuli kotheka, ziyenera kukondedwa.

Masensa onse omwe amapanga ma sigino apano ndi masensa onse opangidwa ndi mphamvu amatha kulumikizidwa ndi zolowetsa zamtundu umodzi (onani dongosolo lolumikizira).

CHENJEZO:

Ku R/M Log zida ndizotheka kulumikiza kokha: ma radiometer, thermo-couples, fluxmeters kapena ma siginolo oyendetsedwa ndikunja (onani chiwembu cholumikizira)

Zomverera zokhala ndi siginecha ya analogue (njira yokhala ndi mapeto amodzi):

A
B
C
D
Voltage siginecha yochokera ku sensor yoyendetsedwa ndi kunja A
B
C
D
Chizindikiro chapano chochokera ku kafukufuku woyendetsedwa ndikunja
Rx + + +
a
b rx

Kukana kwa dontho, kosonyezedwa ndi Rx, kumagwiritsidwa ntchito kubwezera voltage chizindikiro kuchokera pakali pano chopangidwa ndi sensa. Pulogalamu 3DOM imapereka laibulale yokhazikitsira masensa a LSI LASTEM, kuphatikiza zotulutsa zina zoyendetsedwa; pamitundu yotere makonda adakonzedwa kuti agwiritse ntchito sikelo yamphamvu -300÷1200 mV, motero amatha kugwiritsa ntchito 50 Ω drop resistance. Pamene kafukufuku wawonjezedwa pogwiritsa ntchito laibulale ya 3DOM probes, masensa amenewo nthawi zonse amawonjezedwa mosiyana; pachifukwa ichi sizingatheke kuwonjezera kafukufuku wamtundu umodzi ku kasinthidwe komwe kuli kachipangizo kamodzi kokha kopanda; izi zikachitika ikani magawo a muyeso pamanja akufanana ndi zosowa za kafukufuku wina; Ngati n'kotheka, sinthani, ngati n'kotheka, miyeso yosiyana kuchokera ku njira yosiyanitsira imodzi mpaka mutapeza zolowetsa zathunthu zaulere (zolowetsa ziwiri zotsatizana).

3.3.5 Njira zoyankhulirana zambiri

Ma datalogger onse a M-Log ali ndi zida, pamwamba pake, osachepera ndi doko limodzi lolumikizirana (lokhala ndi cholumikizira pawiri, DTE ndi DCE; wamkazi ngati cholozera data chikugwiritsidwa ntchito ngati chipangizo cha DCE, chachimuna ngati chikugwiritsidwa ntchito ngati chipangizo cha DTE); ELO008 ndi ELO009 ali ndi doko lina lolumikizirana (mokha mu DTE mode). Doko la seri limagwiritsidwa ntchito kukonza njira zogwiritsidwira ntchito ndi kutsitsa deta, pogwiritsa ntchito njira yolumikizirana ya LSI CISS.

Doko la serial limasiya fakitale yathu ndi kasinthidwe kotsatiraku:

 Mlingo wa baud: 57600 bps;
 Chiwerengero cha data: 8;
 Kuyimitsa: 1;
 Parity: palibe;
 Network adilesi: 1.

Kugwiritsa ntchito zida

4.1 Front Front panjaview

Chithunzi pansipa chikuwonetsa gulu lakutsogolo la chida:

Mbali yapamwamba ya gulu lakutsogolo imakhala ndi zizindikiro zowala (magetsi, batire, kutumiza ndi kulandila, kuwonetsa zolakwika) ndi chiwonetsero, chomwe chingagwiritsidwe ntchito poyendetsa bwino chida komanso kuwonetsa deta yopezedwa ndi masensa mu nthawi yeniyeni.
Pansi pa gulu lakutsogolo mumakhala kiyibodi yomwe ili ndi makiyi ogwirira ntchito ndi makiyi a mivi

4.2 Kugwiritsa ntchito kiyibodi

Kiyibodi imaphatikizapo makiyi anayi angapo ndi makiyi anayi ogwira ntchito.
Gome lotsatirali likufotokozera mwachidule ntchito zazikulu za kiyi iliyonse, malinga ndi momwe chidacho chimadzipezera.

Pamene akuwonetsa kufunikira kwa miyeso:

Amapita ku diagnostic zenera Type 1
Imasintha mawonekedwe amtundu wa muyeso (wowonjezera, wofupikitsidwa), o
chigawo choyezera, chiwerengero cha terminal yomwe sensor imalumikizidwa nayo kapena ID/channel ya sensa yamawayilesi, ma alarm omwe adayikidwa ndi kukana kuzindikira (zokha zamitundu yotsatizana ELO009)
Imakweza mndandanda wa miyeso
Mpukutu pansi mndandanda wa miyeso
Kugwira/kutulutsa miyeso yopukusa
Amazimitsa chiwonetserocho ndikuyatsa

Pamene mukuwonetsa zambiri za matenda:

Imasinthira ku zenera lowonetsa zamtengo wamiyezo.
Ngati kuli kotheka, kukanikizidwa nthawi yomweyo ndi kiyi, imakhazikitsanso deta yowonetsera (mawerengero, zolakwika ndi zina).
Pawindo lowonetsera la ziwerengero zoyankhulirana zimasintha kuchokera ku chiwerengero cha 1 kupita ku seriyo 2 ndi mosemphanitsa; muwindo la matenda amtundu wa 5 limasonyeza kapena kubisala zowonjezera za modemu ya GPRS (akatswiri a LSI LASTEM okha).
Imawonetsa zenera lachidziwitso lapitalo.
Ikuwonetsa zenera lotsatira lazowunikira.
Mu mtundu 5 diagnostic zenera izo switched pa GPRS modemu (ngati kuzimitsidwa) ndi kuyamba deta kulankhulana kudzera GPRS; mu zenera la matenda amtundu wa 4 limagwiritsa ntchito ma actuators; mu mtundu 7 diagnostic zenera izo mphamvu pa wailesi zida Akapolo.
Mu zenera lamtundu wa 5 limakhazikitsanso modemu ya GPRS

4.3 Onetsani zambiri ndi zowongolera

Pogwiritsa ntchito mawonekedwe a chida, ndizotheka:

 Kuyika kwa malamulo mwachangu
 Kuwonetsa:
o Zipangizo zowonetsera;
o Miyezo yanthawi yomweyo ya miyeso yonse yopangidwa;
o Zambiri za matenda.

4.3.1 Kuyika kwa malamulo mwachangu

Kiyi ya M-Log imapereka ntchito ziwiri kuti makiyi asindikizidwe nawo nthawi imodzi.

4.3.1.1 Yatsani ndikuzimitsa chidacho

Chidacho chikazimitsidwa, kukanikiza ndi makiyi nthawi imodzi, chidacho chimatembenuka
kuyatsa ndikuwonetsa chigoba chowonetsera mankhwala (onani §Errore. L'origine riferimento non è state trovata.) yomwe idzawonetsedwe kwa masekondi pafupifupi 10; pamene chigoba ichi chizimiririka, wolemba datayo adzayambitsa kafukufuku malinga ndi kasinthidwe kosungidwa musanayambe kuzimitsa. Chidacho chikayatsidwa, kukanikiza makiyi omwewo ( ndi ), zidazo zikuwonetsa chigoba pansipa ndipo zidzadikirira kutsimikiziridwa kudzera mu kiyi isanatseke; pakanikiza kiyi ina iliyonse chidacho chimabwerera m'mbuyomu.

4.3.1.2 Njira yopezera mwachangu

Kukanikiza ndi makiyi nthawi imodzi kuchokera ku chigoba chowonetsera deta pompopompo, ndizotheka kupangitsa kuti ma sensor apezeke mwachangu kuposa momwe amakhazikitsira ndi kasinthidwe.
Kukanikizanso ndi makiyi munthawi yomweyo kuchuluka kwa zogulira kudzabweranso kuti mutsatire makonzedwe a kasinthidwe.

Kuti mudziwe zambiri onani §5.2.5

4.3.1.3 kasinthidwe ndi kuzindikira basi ma probes

Pambuyo polumikizana ndi masensa, ndizotheka kukonza chidacho (chokha cha mtundu wa M-Log ELO009) ndikuzindikira ma probes kukanikiza ndi makiyi nthawi imodzi; M-Log iwonetsa chigoba chotsatira ndikudikirira chitsimikiziro kudzera mu kiyi musanayambe ntchito kuti muzindikire ma probes. Pamapeto pa ntchito yokonzekera yokha, ngati chidacho sichinapeze zolakwika, kafukufuku watsopano adzayambika ndipo chigoba chatsopano cha makhalidwe nthawi yomweyo chidzawonetsedwa. Chenjezo: ntchitoyi ichotsa zonse zomwe zasungidwa; musanatsimikize kuzindikira kwadzidzidzi, tsitsani zomwe zasungidwa pa PC.

4.3.1.4 Lembani nthawi yoyambira ndi yomaliza ya kupeza deta (Survey n)

M-Log ndi chida chowunikira kamodzi, koma imapatsa wogwiritsa ntchito mwayi wolemba nthawi yofufuza; mwa kuyankhula kwina amalola kukonza pamanja, pa kafukufuku wina, nthawi yoyambira ndi yomaliza ya kupeza deta. Izi zikuwonetsedwa ndi mapulogalamu a LSI LASTEM (monga Microclima) kuti azitha kusankha mosavuta zomwe zikuphatikizidwa mu nthawi ya s.ampling. Nthawi yoyambira, kuganizira za data, ndikukanikiza kokhazikika ndi makiyi nthawi yomweyo; chiwonetserochi chikuwonetsa masks otsatirawa:

Koma kukanikiza kachiwiri ndi makiyi pa nthawi yomweyo izo zidzakhazikika nthawi yotsiriza; chida adzapitiriza kupulumutsa deta, koma osati mkati kafukufuku anatseka kale. Nambala yodziwika bwino n idzazindikiritsa malo osankhidwa; n idzachulukitsidwa nthawi iliyonse malo atsopano owerengera deta atakhazikitsidwa. Kukonzanso kwa nambala ya kafukufuku kumapangidwa kokha kusintha kasinthidwe kuchokera pa PC kapena kuyambitsa njira yatsopano yodzizindikiritsa yokha.

4.3.1.5 Bwezerani ziwerengero

Kukanikiza ndi makiyi panthawi imodzimodziyo, ndizotheka kukonzanso ziwerengero za chiwerengero cha chigoba cha matenda nambala 2 (onani §4.3.4), mwa kuyankhula kwina makhalidwe omwe amatchulidwa pa kuyankhulana (mabyte ndi kutumizidwa ndi kulandira mauthenga).

6 Fast kufala mode

Kukanikiza ndi makiyi nthawi yomweyo kuchokera diagnostic zenera mtundu 2, ndi zotheka kusankha sensa mofulumira kufala mode (kufala sekondi iliyonse). Ntchitoyi idzagwira ntchito pokhapokha ngati mtengo wosiyana ndi 0 wayikidwa mu seri communication port x  Instantaneous values ​​automatic transmission rate option (x imatenga ma values ​​1 kapena 2 molingana ndi doko lachibale) mu kasinthidwe kutumiza ku chida. Kuthamanga mofulumira kufala mode adzakhala yambitsa kokha pa doko siriyo amene amafunsidwa pa kusonyeza zenera matenda: pamene inu kusonyeza matenda zenera mtundu 2 wachibale kwa siriyo doko 1 (C1), makiyi kuphatikiza ndi yambitsa kufala kufala mode kokha kwa coomunication siriyo doko 1. Kukanikiza kachiwiri makiyi omwewo kuphatikiza kuphatikiza, ndi kufala kwa parameter configuration adzabwerera kumachitidwe parameter.

4.3.1.7 Kukhazikitsa wotchi yadongosolo

Masekondi angapo mutayatsidwa, chidacho chingafunike kuyikanso wotchi (tsiku ndi nthawi). Izi zitha kuchitika pokhapokha ngati, mwachitsanzoample, kutulutsa kwathunthu kwa batri: pamenepa tsiku/nthawi yokhazikitsa ndi yokakamiza ndipo sikungaletsedwe.
Kusintha kwa tsiku/nthawi kumatha kuchitika nthawi iliyonse mukafuna kuchokera pawindo la Diagnostic mtundu 1. Gwiritsani ntchito makiyi awa:

 : lowetsani njira yosinthira; tulukani pakusintha kotsimikizira ndikusunga tsiku/nthawi yatsopano;
 : kutuluka munjira yosinthira ndikuchotsa zomwe zingasinthidwe;
 : sunthani cholozera pamunda kuti musinthe;
 : imawonjezera mtengo wosankhidwa ndi cholozera; zinthu zina za tsiku/nthawi zimatha kusintha masiku ano;
 : imachepetsa mtengo wosankhidwa ndi cholozera; zinthu zina za tsiku/nthawi zimatha kusintha masiku ano.

xxx: chitsanzo cha zida;
 aa.bb.cc: kutulutsa pulogalamu (higher.lower.build);
 yymmnnnn: serial number;
 uuuuuuuuu: nambala ya serial kapena nambala ya chida (yokhazikitsidwa ndi wogwiritsa ntchito).

Zambirizi zimapezekanso pamene chida chikugwira ntchito ndipo chikhoza kutchedwa pogwiritsa ntchito kiyibodi kuti musankhe zenera ili kuti liwonetsedwe.

Kuyimitsa chizindikiro cholakwika

Pali njira ziwiri zoletsera kuwonetsa zolakwika:

1) Dinani kiyi ndipo pomwe nambala yolakwika ikuwonetsedwa pazenera lazowunikira 1 kuti mukonzenso cholakwikacho (komabe chikhalabe pachiwonetsero mukachoka ndikuyitanitsa zenera lozindikira);
2) Pamene deta imasamutsidwa pakati pa chida ndi PC: pamenepa chida chimabwezeretsanso cholakwikacho chifukwa chimawona kuti cholakwikacho chapezedwa kale ndi munthu wogwiritsa ntchito kompyuta.

Muzochitika zonsezi, kukonzanso kudzazimitsa chizindikiro cha Optical Err, kuchotsa nambala yolakwika pawindo lazenera la mtundu 1 ndikuyimitsa chizindikiro pa zotsatira za zotsatira (ngati zakonzedwa ndi logic). Kukonzanso kolakwika kudzakhalabe mpaka chida chipeza cholakwika chatsopano; pamenepa chida chidzayambitsanso njira yowonetsera zolakwika monga momwe tafotokozera kale.

Cholakwika chapezeka muyeso

Miyezo yowonetsedwa ndi miyeso (makhalidwe anthawi yomweyo) imatha kuwonetsa zolakwika (Err), mumikhalidwe iyi:

 Ngati muyeso wapezedwa:
o Kukonzekera kwa muyeso wosagwirizana ndi mtundu wa chizindikiro chomwe chiyenera kuyezedwa (mtundu wamagetsi wosankhidwa, mtundu wa mzere, chizindikiro chowerengeranso, ndi zina zotero);
o Sensor yasokonezedwa kapena sinalumikizidwe bwino ndi bolodi yolumikizira (onani §Errore. L'origine riferimento non è stata trovata.);
o Ngati sensa imayendetsedwa ndi kutulutsa mphamvu, nthawi yoyambira ikhoza kukhala yosakwanira;
o Chizindikiro cholowetsa magetsi (ku chida) chatha;
o Muyezo wa thermocouple, kutentha kwapakati (kutentha kwamkati) sikungakonzedwe;
o Muyeso womwe wapezedwa kuchokera ku serial port: palibe uthenga wovomerezeka womwe wapezeka kuchokera ku sensa panthawi yofanana ndi kuchuluka kwa ma seti atatu.
 Ngati muyeso wawerengedwa:
o Mlingo wapang'ono kapena wolakwika kuchokera ku miyeso imodzi kapena zingapo zodalira zomwe zaperekedwa ku muyeso womwe ukuyenera kuwerengedwa;

Zolemba / Zothandizira

LSI-LASTEM DISACC210034 Compact and Versatile Data Logger [pdf] Buku la Mwini DISACC210034 Compact and Versatile Data Logger, DISACC210034, Compact and Versatile Data Logger, Versatile Data Logger, Data Logger, Logger

Maumboni

• Buku Logwiritsa Ntchito