Beijer ELECTRONICS GT-3468 Analogi Input Module
Zofotokozera
- Zofotokozera Zachilengedwe: The module operates within a temperature range of X to Y degrees Celsius and a humidity range of Z% to W%.
- Mafotokozedwe Azambiri: Provides details on the general functioning and compatibility of the module.
- Zolowetsa: Details on the analog input capabilities, voltage range, resolution, etc.
Za Bukuli
Bukuli lili ndi zambiri zamapulogalamu ndi zida za hardware za Beijer Electronics GT-3468 Analog Input Module. Imalongosola mozama, chitsogozo pa kukhazikitsa, kukhazikitsa, ndi kagwiritsidwe ntchito ka chinthucho.
Zizindikiro Zogwiritsidwa Ntchito M'bukuli
Bukuli lili ndi zizindikiro za Chenjezo, Chenjezo, Zidziwitso ndi Zofunikira ngati kuli koyenera, zofotokoza zokhudzana ndi chitetezo, kapena zinthu zina zofunika. Zizindikiro zofananira ziyenera kutanthauziridwa motere:
CHENJEZO
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury, and major damage to the product.
CHENJEZO
Indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate injury, and moderate damage to the product.
ZOFUNIKA
Highlights key information.
ZINDIKIRANI
Points out relevant facts and conditions.
MFUNDO YOTHANDIZA
Provides useful, non-essential information to assist you.
Chitetezo
Musanagwiritse ntchito mankhwalawa, chonde werengani bukuli ndi zolemba zina zofunika. Samalani kwathunthu malangizo achitetezo!
Palibe chomwe Beijer Electronics sichikhala ndi udindo kapena kukhala ndi mlandu pazowonongeka chifukwa chogwiritsa ntchito mankhwalawa.
Zithunzi, mwachitsanzoamples ndi zojambula mu bukhuli zikuphatikizidwa ndi cholinga chowonetsera. Chifukwa chamitundu yambiri ndi zofunikira zomwe zimagwirizanitsidwa ndi kukhazikitsa kwina kulikonse, Beijer Electronics sangathe kutenga udindo kapena udindo pakugwiritsa ntchito kwenikweni kutengera zomwe zachitika kale.amples ndi zithunzi.
Zitsimikizo Zazinthu
Chogulitsacho chili ndi ziphaso zotsatirazi.
Zofunikira Pazachitetezo Chonse
CHENJEZO
- Osasonkhanitsa zinthu ndi mawaya omwe ali ndi mphamvu yolumikizidwa ndi dongosolo. Kuchita zimenezi kumayambitsa "arc flash", yomwe ingayambitse zochitika zoopsa zosayembekezereka (kuwotcha, moto, zinthu zowuluka, kuphulika kwa mphepo, kuphulika kwa phokoso, kutentha).
- Osakhudza midadada yomaliza kapena ma module a IO pomwe dongosolo likuyenda. Kuchita zimenezi kungayambitse kugwedezeka kwa magetsi, kufupika kwafupipafupi kapena kuwonongeka kwa chipangizocho.
- Musalole kuti zinthu zakunja zachitsulo zikhudze chinthucho pamene dongosolo likuyenda. Kuchita zimenezi kungayambitse kugwedezeka kwa magetsi, kufupika kwafupipafupi kapena kuwonongeka kwa chipangizocho.
- Musayike mankhwala pafupi ndi zinthu zoyaka moto. Kuchita zimenezi kungayambitse moto.
- Ntchito zonse zama waya ziyenera kuchitidwa ndi mainjiniya amagetsi.
- Pogwira ma module, onetsetsani kuti anthu onse, malo ogwirira ntchito ndi zonyamula zili bwino. Pewani kukhudza zigawo zoyendetsera, ma modules ali ndi zida zamagetsi zomwe zingawonongeke ndi electrostatic discharge.
CHENJEZO
- Musagwiritse ntchito mankhwalawa m'malo omwe kutentha kupitilira 60 ℃. Pewani kuika mankhwala padzuwa.
- Musagwiritse ntchito mankhwalawa m'malo okhala ndi chinyezi chopitilira 90%.
- Gwiritsani ntchito mankhwalawa nthawi zonse m'malo omwe ali ndi digiri ya 1 kapena 2 yoipitsa.
- Gwiritsani ntchito zingwe zokhazikika polumikizira.
Za G-series System
Dongosolo lathaview
- Network Adapter Module - The network adapter module imapanga ulalo pakati pa mabasi akumunda ndi zida zakumunda ndi ma module okulitsa. Kulumikizana kwa machitidwe amabasi osiyanasiyana kumatha kukhazikitsidwa ndi gawo lililonse lofananira la adaputala zapaintaneti, mwachitsanzo, kwa MODBUS TCP, Efaneti IP, EtherCAT, PROFINET, CC-Link IE Field, PROFIBUS, CANopen, DeviceNet, CC-Link, MODBUS / Series etc.
- Kukula Module - Mitundu ya module yokulitsa: Digital IO, Analog IO, ndi ma module apadera.
- Kutumizirana mameseji - Dongosololi limagwiritsa ntchito mitundu iwiri ya mauthenga: Kutumizirana mameseji ndi ma IO.
IO Process Data Mapping
Module yokulitsa ili ndi mitundu itatu ya data: IO data, parameter yosinthira, ndi registry memory. Kusinthana kwa data pakati pa adaputala ya netiweki ndi ma module okulitsa kumapangidwa kudzera pa data ya chithunzi cha IO ndi protocol yamkati.
Kuyenda kwa data pakati pa ma adapter network (63 slots) ndi ma module okulitsa
Kulowetsa ndi kutulutsa deta yazithunzi kumadalira malo a slot ndi mtundu wa data wa slot yowonjezera. Kusanja kwa data ya chithunzi cholowetsa ndi kutulutsa kumatengera malo okulitsa. Mawerengedwe a dongosololi akuphatikizidwa m'mabuku a ma adapter a netiweki ndi ma module a IO osinthika.
Deta yovomerezeka ya parameter imadalira ma module omwe akugwiritsidwa ntchito. Za exampndi, ma analogi modules ali ndi zoikamo
of either 0-20 mA or 4-20 mA, and temperature modules have settings such as PT100, PT200, and PT500. The documentation for each module provides a description of the parameter data.
Zofotokozera
Zofotokozera Zachilengedwe
| Kutentha kwa ntchito | -20°C –60°C |
| Kutentha kwa UL | -20°C –60°C |
| Kutentha kosungirako | -40°C –85°C |
| Chinyezi chachibale | 5% - 90% osafupikitsa |
| Kukwera | DIN njanji |
| Kuchita mantha | IEC 60068-2-27 (15G) |
| Kukana kugwedezeka | IEC 60068-2-6 (4 g) |
| Kutulutsa kwa mafakitale | EN 61000-6-4: 2019 |
| Industrial chitetezo chokwanira | EN 61000-6-2: 2019 |
| Kuyika malo | Oima ndi yopingasa |
| Zitsimikizo zazinthu | CE, FCC, UL, CUL |
General Specification
| Kutaya mphamvu | Max. 30 mA @ 5 VDC |
| Kudzipatula | I/O ku logic: Kudzipatula
Mphamvu zakumunda: Kusadzipatula |
| Mphamvu ya UL | Wonjezerani voltage: 24 VDC mwadzina, kalasi2 |
| Mphamvu zakumunda | Wonjezerani voltage: 24 VDC mwadzina Voltagmtundu: 18-30 VDC
Kutaya mphamvu: Max. 30 mA @ 24 VDC |
| Wiring | I/O Cable Max. 2.0mm2 (AWG 14) |
| Torque | 0.8 Nm (7 lb-mu) |
| Kulemera | 58g pa |
| Kukula kwa module | 12 mm x 99 mm x 70 mm |
Makulidwe
Zofotokozera
| Zolowetsa pa module | 8 njira imodzi inatha, yosadzipatula pakati pa tchanelo |
| Zizindikiro | 8 mawonekedwe obiriwira |
| Kusamvana m'magulu | 16-bit (kuphatikizapo chizindikiro)
15 bits: 0.31 mV/bit (0-10 V), 0.15 mV/bit (0-5 V), 0.12 mV/bit (1-5 VDC) |
| Lowetsani zapano | 0-10 VDC, 0-5 VDC, 1-5 VDC |
| Mtundu wa data | 16 bits integer (2′ kuyamikira) |
| Kulakwitsa kwa module | ± 0.1 % sikelo yonse @ 25 ℃ yozungulira
± 0.3 % sikelo yonse @ -40 °C, 70 ℃ |
| Kulowetsedwa kwa impedance | 500 kΩ |
| Matenda | Kuzimitsa gawo lazidziwitso: Kuwala kwa LED
Mphamvu yakumunda yayatsidwa: LED yazimitsa < 0.5 % (mtengo wolowera kwambiri) Mphamvu yapamunda yayatsidwa: LED pa> 0.5 % (mtengo wolowera kwambiri) |
| Nthawi yotembenuka | 0.5 ms / All channels |
| Kulinganiza munda | Osafunikira |
| Mtundu wamba | 2 wamba, mphamvu yakumunda 0 V ndiyofala (AGND) |
Chithunzi cha Wiring
| Pinani ayi. | Kufotokozera kwa siginecha |
| 0 | Lowetsani njira 0 |
| 1 | Lowetsani njira 1 |
| 2 | Lowetsani njira 2 |
| 3 | Lowetsani njira 3 |
| 4 | Lowetsani njira 4 |
| 5 | Lowetsani njira 5 |
| 6 | Lowetsani njira 6 |
| 7 | Lowetsani njira 7 |
| 8 | Input channel common (AGND) |
| 9 | Input channel common (AGND) |
Chizindikiro cha LED
| LED no. | Ntchito ya LED / kufotokozera | Mtundu wa LED |
| 0 | INPUT chaneli 0 | Green |
| 1 | INPUT chaneli 1 | Green |
| 2 | INPUT chaneli 2 | Green |
| 3 | INPUT chaneli 3 | Green |
| 4 | INPUT chaneli 4 | Green |
| 5 | INPUT chaneli 5 | Green |
| 6 | INPUT chaneli 6 | Green |
| 7 | INPUT chaneli 7 | Green |
Mkhalidwe wa Channel ya LED
| Mkhalidwe | LED | Chizindikiro |
| Opaleshoni yachibadwa | [Kuzimitsa kwa LED <0.5 % (mtengo wolowera kwambiri)] -
Channel WOZIMA [LED pa> 0.5 % (mtengo wolowera kwambiri)] - Green Channel |
Opaleshoni yachibadwa |
| Kulakwitsa kwamphamvu | Makanema onse amabwereza Green ndi WOZIMA | Mphamvu zakumunda sizilumikizidwa |
Mtengo wa data / Voltage
Voltage range: 0-10 VDC
| Voltage | 0.0 V | 2.5 V | 5.0 V | 10.0 V |
| Deta (Hex) | H0000 | H1FFF | H3FFF | H7FFF |
Voltagmndandanda: 0-5 VDC
| Voltage | 0.0 V | 1.25 V | 2.5 V | 5.0 V |
| Deta (Hex) | H0000 | H1FFF | H3FFF | H7FFF |
Voltage range: 1-5 VDC
| Voltage | 1.0 V | 2.0 V | 3.0 V | 5.0 V |
| Deta (Hex) | H0000 | H1FFF | H3FFF | H7FFF |
Kuyika Deta mu Tabu la Zithunzi
Lowetsani data ya module
| Kuyika kwa analogi Ch 0 |
| Kuyika kwa analogi Ch 1 |
| Kuyika kwa analogi Ch 2 |
| Kuyika kwa analogi Ch 3 |
| Kuyika kwa analogi Ch 4 |
| Kuyika kwa analogi Ch 5 |
| Kuyika kwa analogi Ch 6 |
| Kuyika kwa analogi Ch 7 |
Lowetsani mtengo wazithunzi
| Pang no. | Pang'ono 7 | Pang'ono 6 | Pang'ono 5 | Pang'ono 4 | Pang'ono 3 | Pang'ono 2 | Pang'ono 1 | Pang'ono 0 |
| Ndi 0 | Kuyika kwa analogi Ch 0 low byte | |||||||
| Ndi 1 | Kuyika kwa analogi Ch 0 high byte | |||||||
| Ndi 2 | Kuyika kwa analogi Ch 1 low byte | |||||||
| Ndi 3 | Kuyika kwa analogi Ch 1 high byte | |||||||
| Ndi 4 | Kuyika kwa analogi Ch 2 low byte | |||||||
| Ndi 5 | Kuyika kwa analogi Ch 2 high byte | |||||||
| Ndi 6 | Kuyika kwa analogi Ch 3 low byte | |||||||
| Ndi 7 | Kuyika kwa analogi Ch 3 high byte | |||||||
| Ndi 8 | Kuyika kwa analogi Ch 4 low byte | |||||||
| Ndi 9 | Kuyika kwa analogi Ch 4 high byte | |||||||
| Ndi 10 | Kuyika kwa analogi Ch 5 low byte | |||||||
| Ndi 11 | Kuyika kwa analogi Ch 5 high byte | |||||||
| Ndi 12 | Kuyika kwa analogi Ch 6 low byte | |||||||
| Ndi 13 | Kuyika kwa analogi Ch 6 high byte | |||||||
| Ndi 14 | Kuyika kwa analogi Ch 7 low byte | |||||||
| Ndi 15 | Kuyika kwa analogi Ch 7 high byte | |||||||
Parameter Data
Utali wovomerezeka wa parameter: 10 Bytes
| Pang no. | Pang'ono 7 | Pang'ono 6 | Pang'ono 5 | Pang'ono 4 | Pang'ono 3 | Pang'ono 2 | Pang'ono 1 | Pang'ono 0 |
| Ndi 0 | Voltage range for Ch 0 (H00: 0-10 VDC, H01: 0-5 VDC, H02: 1-5 VDC) | |||||||
| Ndi 1 | Voltage range for Ch 1 (H00: 0-10 VDC, H01: 0-5 VDC, H02: 1-5 VDC) | |||||||
| Ndi 2 | Voltage range for Ch 2 (H00: 0-10 VDC, H01: 0-5 VDC, H02: 1-5 VDC) | |||||||
| Ndi 3 | Voltage range for Ch 3 (H00: 0-10 VDC, H01: 0-5 VDC, H02: 1-5 VDC) | |||||||
| Ndi 4 | Voltage range for Ch 4 (H00: 0-10 VDC, H01: 0-5 VDC, H02: 1-5 VDC) | |||||||
| Ndi 5 | Voltage range for Ch 5 (H00: 0-10 VDC, H01: 0-5 VDC, H02: 1-5 VDC) | |||||||
| Ndi 6 | Voltage range for Ch 6 (H00: 0-10 VDC, H01: 0-5 VDC, H02: 1-5 VDC) | |||||||
| Ndi 7 | Voltage range for Ch 7 (H00: 0-10 VDC, H01: 0-5 VDC, H02: 1-5 VDC) | |||||||
| Ndi 8 | Filter Time (H00: Default (20), H01: Fastest, H3E: Slowest ) | |||||||
| Ndi 9 | Modul e resolu tion (0: 16-
bit (defau lt), 1: 14-bit) |
Zosungidwa | ||||||
Kukonzekera kwa Hardware
CHENJEZO
- Always read this section before installing the module!
- Hot surface! The surface of the housing can become hot during operation. If the module is used in high ambient temperatures, always let it cool down before touching it.
- Working on energized devices can damage the equipment! Always turn off the power supply before working on the module.
Zofunikira za Space
Zithunzi zotsatirazi zikuwonetsa zofunikira za danga mukakhazikitsa ma module a G-series. Kutalikirana kumapanga malo olowera mpweya wabwino, komanso kumalepheretsa kusokoneza kwa ma elekitiromu kuti zisakhudze ntchitoyo. Malo oyikapo ndi olondola komanso opingasa. Zojambulazo ndi zowonetsera ndipo zikhoza kukhala zosiyana.
CHENJEZO
Kusatsata zofunikira za malo kungayambitse kuwononga malonda.
Mount Module kupita ku DIN Rail
Mitu yotsatirayi ikufotokoza momwe mungakwezere gawoli ku njanji ya DIN.
CHENJEZO
Module iyenera kukhazikitsidwa ku njanji ya DIN yokhala ndi zotchingira zotsekera.
Phiri la GL-9XXX kapena GT-XXXX Module
Malangizo otsatirawa akugwira ntchito pamitundu iyi:
- GL-9XXX
- GT-1XXX
- GT-2XXX
- GT-3XXX
- GT-4XXX
- GT-5XXX
- GT-7XXX
Ma module a GN-9XXX ali ndi zotchingira zitatu, imodzi pansi ndi ziwiri kumbali. Kuti mumve malangizo oyikapo, onani Mount GN-9XXX Module.
Phiri la GN-9XXX Module
Kukweza kapena kutsitsa adaputala ya netiweki kapena gawo la IO losinthika lokhala ndi dzina lazogulitsa GN-9XXX, mwachitsanzo.ample GN-9251 kapena GN-9371, onani malangizo awa:
Mount Removable Terminal Block
Kuti muyike kapena kutsitsa chotchinga chochotsamo (RTB), onani malangizo omwe ali pansipa.
Lumikizani Ma Cables ku Removable Terminal Block
Kuti mulumikize/kudula zingwe ku/kuchokera pa chipika chochotsekera (RTB), onani malangizo ali m'munsimu.
CHENJEZO
Nthawi zonse gwiritsani ntchito voliyumu yoyeneratage ndi pafupipafupi kuteteza kuwonongeka kwa zipangizo ndi kuonetsetsa ntchito mulingo woyenera.
Field Power ndi Data Pins
Kulankhulana pakati pa adaputala ya G-series network adapter ndi gawo lokulitsa, komanso mphamvu yamagetsi / gawo la ma module amabasi kumachitika kudzera pabasi yamkati. Zimapangidwa ndi 2 Field Power Pins ndi 6 Data Pins.
CHENJEZO
Osakhudza ma data ndi ma pini amagetsi akumunda! Kukhudza kumatha kuwononga ndikuwonongeka ndi phokoso la ESD.
| Pinani ayi. | Dzina | Kufotokozera |
| P1 | System VCC | Kupereka kwadongosolo voltage (5 VDC) |
| P2 | Gawo GND | Malo a dongosolo |
| P3 | Kutulutsa kwa chizindikiro | Doko lotulutsa chizindikiro cha module ya processor |
| P4 | Kutulutsa kosafanana | Transmitter linanena bungwe la processor module |
| P5 | Zowonjezera | Doko lolowera lolowera la module ya processor |
| P6 | Zosungidwa | Zasungidwa chizindikiro cholambalala |
| P7 | Gawo GND | Munda wamunda |
| P8 | Gawo VCC | Mphamvu yamagetsi voltage (24 VDC) |
Copyright © 2025 Beijer Electronics AB. Maumwini onse ndi otetezedwa.
Zomwe zili m'chikalatachi zimatha kusintha popanda chidziwitso ndipo zimaperekedwa ngati zilipo panthawi yosindikiza. Beijer Electronics AB ili ndi ufulu wosintha chilichonse popanda kukonzanso bukuli. Beijer Electronics AB ilibe udindo pazolakwa zilizonse zomwe zingawoneke pachikalatachi. Zonse exampLes m'chikalatachi angofuna kupititsa patsogolo kumvetsetsa kwa magwiridwe antchito ndi kasamalidwe ka zida. Beijer Electronics AB singakhale ndi udindo uliwonse ngati izi zinali kaleampLes amagwiritsidwa ntchito kwenikweni.
In view pamitundu yosiyanasiyana ya mapulogalamu a pulogalamuyi, ogwiritsa ntchito ayenera kudzidziwa okha mokwanira kuti awonetsetse kuti akugwiritsidwa ntchito moyenera pakugwiritsa ntchito kwawo. Anthu omwe ali ndi udindo wogwiritsa ntchito ndi zidazo ayenera kuwonetsetsa kuti ntchito iliyonse ikugwirizana ndi zofunikira zonse, miyezo, ndi malamulo okhudzana ndi kasinthidwe ndi chitetezo. Beijer Electronics AB sidzavomera chilichonse pakuwonongeka kulikonse komwe kunachitika pakukhazikitsa kapena kugwiritsa ntchito zida zomwe zatchulidwa pachikalatachi. Beijer Electronics AB imaletsa kusinthidwa, kusintha, kapena kusintha kwa zida zonse.
Ofesi yayikulu
- Malingaliro a kampani Beijer Electronics AB
- Chithunzi cha 426
- 201 24 Malmö, Sweden
- www.beijerelectronics.com / +46 40 358600
FAQ
Ndiyenera kuchita chiyani ngati chizindikiro cha LED sichikuyatsa?
Check the wiring connections to ensure they are secure and correct. Also, verify power supply to the module.
Zolemba / Zothandizira
 |
Beijer ELECTRONICS GT-3468 Analogi Input Module [pdf] Buku Logwiritsa Ntchito GT-3468 Analogi Input Module, GT-3468, Analogi Input Module, Inpured Module, Module |