NXP FRDM-MCXC242 Development Board

MCUXpresso Developer Experience

USER GUIDE

MCUXpresso Developer Experience

Get to know the FRDM-MCXC242 development board

NXP’s MCUXpresso Developer Experience provides you with cost-effective MCU development boards.
Easy I/O access supports expansion board use for fast prototyping and rapid evaluation.
Enjoy your FRDM-MCXC242!

NXP FRDM-MCXC242

NXP FRDM-MCXC242

Quick Start Guide FRDM-MCXC242

NXP FRDM-MCXC242

NXP FRDM-MCXC242

How to get started

Setup

1. Connect the FRDM-MCXC242 board to a PC using the USB Type-C® cable
2. The board comes preprogrammed with a blinky LED demo
3. Get started at nxp.com/FRDM-MCXC242/start Software and expansion boards
4. Use different headers to connect sensors, Arduino shields and more
5. Access software and tools through our MCUXpresso Developer Experience nxp.com/MCUXpresso
– Expansion Board Hub mcuxpresso.nxp.com/eb-hub to find add-on boards from NXP and our partners with related MCUXpresso SDK-compatible drivers and examples
– Application Code Hub mcuxpresso.nxp.com/appcodehub to browse application code examples from our experts to help kick start your project

Support

Visit www.nxp.com/support

NXP FRDM-MCXC242

www.nxp.com/FRDM-MCXC242

NXP, the NXP logo and NXP SECURE CONNECTIONS FOR A SMARTER WORLD are trademarks of NXP B.V.
All other product or service names are the property of their respective owners. © 2024 NXP B.V.

Document Number: MCXC242QSG REV 0 Agile Number: 975-93441 REV A

Specifications

  • MCU-Link debugger
  • J3 Arduino header
  • MCU debugger header
  • MCU USB
  • MCU-Link USB
  • SW1 RESET button
  • J2 Arduino header
  • J4 Arduino header
  • MCX C242 MCU SW3 ISP button
  • J1 Arduino header SW2 Wake up button
  • RGB LED
  • Pmod I2C sensor

FAQ

Q: Is the FRDM-MCXC242 board compatible with other NXP development tools?

A: Yes, the FRDM-MCXC242 board is compatible with other NXP development tools that support the same MCU architecture.

Q: Can I use the FRDM-MCXC242 board with Arduino IDE?

A: Yes, you can use the FRDM-MCXC242 board with the Arduino IDE by selecting the appropriate board settings and installing the required libraries.

Q: How do I update the firmware on the FRDM-MCXC242 board?

A: To update the firmware on the FRDM-MCXC242 board, you can follow the instructions provided on the NXP website or use the MCUXpresso tools for firmware updates.

Documents / Resources

NXP FRDM-MCXC242 Development Board [pdf] User Guide
MCX, MCX C, FRDM-MCXC242 Development Board, FRDM-MCXC242, Development Board, Board

References

Leave a comment

Your email address will not be published. Required fields are marked *