NXET NX-SWLCA Mini Wireless Pro Controller For Switch
Specifications
- Product: Mini Wireless Pro Controller for Switch
- Model: NX-SWLCA
- Package Contents: Charging Grip, USB-C Play and Charging Cable
- LED Indicator Colors: Amber (Charging in Process), Green (Charging Complete)
Product Usage Instructions
Charging Grip Setup
- Using the included USB-C Play and Charging cable, connect it to the USB-C port at the top of the Charging Grip.
- Connect the other end of the cable to the Switch 2 dock or any available USB-A adapter.
Attaching/Removing Controllers
To attach or remove the controllers:
- Pull the grips apart in opposite directions to detach or attach the controllers.
- Ensure the controllers are properly seated to see LED indicator lights through the lens.
Checking Charging Status
To check the charging status of the Joy-Con 2 controller:
- Observe the LED indicator at the top of the charging grip.
- Amber light indicates charging in process, while green light indicates charging complete.
- When fully charged, the LED indicator will change from amber to green.
Legal Notices
FCC Information: This device complies with part 15 of the FCC Rules. Operation is subject to certain conditions to prevent interference. Any changes not approved may void user’s authority.
Warranty
One-Year Limited Warranty. Visit www.next-accessories.com for more details. English V1-24-1014
PACKAGE CONTENTS
- Charging Grip
- Play and Charging Cable(1.5m)
Before using your new product, please read these instructions to prevent any damage.
HOW TO USE THE CHARGING GRIP
- Using the included USB-C Play and Charging cable, connect to the USB-C port at the top of the Charging Grip, and then connect the other end to the Switch 2 dock or any available USB-A adapter.
- To attach/remove the controllers, pull the grips apart in opposite directions.
- The LED indicator lights will display through the lens once the Joy-Con 2 are properly seated.
To check the charging status of the Joy-Con 2 controller, please check the LED indicator at the top of the charging grip. When the Joy-Con 2 controller are fully charged, the LED indicator will change from amber to green.
FCC Information
LEGAL NOTICES
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
ONE-YEAR LIMITED WARRANTY
Visit www.next-accessories.com for details.
This product is not approved, endorsed or affiliated with Sony. ©2025. All Rights Reserved.
Made in China
FAQ
Q: How do I know if my Joy-Con 2 controller is fully charged?
A: When the LED indicator on the charging grip changes from amber to green, it indicates that the Joy-Con 2 controller is fully charged.
Documents / Resources
 |
NXET NX-SWLCA Mini Wireless Pro Controller For Switch [pdf] User Guide NX-SWLCA Mini Wireless Pro Controller For Switch, NX-SWLCA, Mini Wireless Pro Controller For Switch, Pro Controller For Switch, For Switch, Switch |