RBWS2223F 2.5 Inch Angular Pouring Basin
“
Product Information
Specifications
- Catalog Number: RBWS2223F
- Material: Heat-resistant graphite
- Compatible with: T-Series and B-Series horizontal top fill
sleeves - Requires: RBW167 pouring basin frame (sold separately)
Product Usage Instructions
Installation
Ensure that the structure allows for angular installations
before using the top fill pouring basin. Follow these steps for
installation:
- Read and understand all detailed instructions in the nVent
LENTON Cadweld Rebar Splicing System Instruction Manual. - Ensure proper clearance for installation.
- Use with RBW167 pouring basin frame.
Maintenance
Regularly inspect the pouring basin for any signs of wear or
damage. Clean as needed to maintain optimal performance.
Compatibility
Designed specifically for use with T-Series and B-Series
horizontal top fill sleeves for efficient flow of filler
material.
FAQ
Q: Can I use the RBWS2223 pouring basins without the RBW167
pouring basin frame?
A: No, the RBWS2223 pouring basins require the RBW167 pouring
basin frame for proper installation and usage.
Q: Are other sizes of RBWS2223 pouring basins available?
A: Sizes not shown may be available by special order. Please
contact your nVent LENTON representative for more information.
“`
We connect and protect
Angular Pouring Basin, Top Fill, 30°, 2.5″ dia
CATALOG NUMBER
RBWS2223F
Top fill pouring basins should be used on angular installations whenever the clearances of the structure allow. The compact size of the top fill pouring basins help ensure the best possible flow of filler material.
FEATURES
Made from heat-resistant graphite Durable, re-usable and long lasting Designed for use with T-Series and B-Series horizontal top fill sleeves
PRODUCT ATTRIBUTES
Material: Graphite Diameter (Ø): 2 1/2″ Length (L): 3.69 Width (W): 3 1/2″ Height (H): 5 1/2″ Angle (a): 30 °
ADDITIONAL PRODUCT DETAILS
RBWS2223 pouring basins require one RBW167 pouring basin frame (sold separately). Prior to installation, please read and understand all of the detailed instructions and safety notices provided in the nVent LENTON Cadweld Rebar Splicing System Instruction Manual. Sizes not shown may be available by special order. Contact your nVent LENTON representative for more information.
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.
North America +1.800.753.9221 Option 1 Customer Care Option 2 Technical Support
Europe Netherlands: +31 800-0200135 France: +33 800 901 793
Europe Germany: 800 1890272 Other Countries: +31 13 5835404
APAC Shanghai: + 86 21 2412 1618/19 Sydney: +61 2 9751 8500
Our powerful portfolio of brands:
CADDY ERICO HOFFMAN
ILSCO
SCHROFF
TRACHTE
©2025 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.
This document is system-generated.
| nVent.com/LENTON 2
Documents / Resources
 |
nVent RBWS2223F 2.5 Inch Angular Pouring Basin [pdf] Owner's Manual RBWS2223F, RBW167, RBWS2223F 2.5 Inch Angular Pouring Basin, 2.5 Inch Angular Pouring Basin, Angular Pouring Basin, Pouring Basin, Basin |