A86PM37 Panel for Free-Stand with Mounting Stud
Product Information
Specifications
- Article Number: 29980
- Height: 78in
- Width: 34in
- Material: Mild Steel
- Finish: Powder Coated
- Color: White
- Thickness: 11ga
- Hole Quantity: 8
- Fits Enclosure Height: 86in
- Weight: 116lb
Product Usage Instructions
Installation
- Ensure the Free-Stand Multi-Door Enclosure is properly set up
and secure. - Identify the mounting stud in the enclosure where the panel
will be placed. - Use the provided panel mounting hardware to attach the panel
securely to the mounting stud. - If using a catalog number ending in B or BG, ensure to bolt
together the two panels with top and bottom stiffeners for
additional support.
Maintenance
Regularly inspect the panel for any signs of damage or wear.
Clean the panel with a mild detergent and soft cloth to maintain
its appearance.
Safety Precautions
Follow all installation instructions provided by nVent to
prevent product malfunction or injuries. Do not exceed the weight
capacity of the panel to avoid accidents.
FAQ
Q: What should I do if I notice any damage to the panel?
A: If you observe any damage, discontinue use of the panel
immediately and contact nVent customer service for assistance.
Q: Can I paint the panel a different color?
A: It is recommended to consult with nVent before painting the
panel to ensure that the new finish does not affect its performance
or warranty.
We connect and protect
Panel for Free-Stand with Mounting Stud, fits 86×37 1-Bay, White
CATALOG NUMBER
A86PM37
Use these panels in Free-stand Multi-Door Enclosures with Mounting Stud. Extra holes are provided for lifting and installing panels. Catalog numbers with BG suffix include two conductive panels bolted together with top and bottom stiffeners for additional support.
FEATURES
Panel mounting hardware is furnished with all enclosures which accept these panels
PRODUCT ATTRIBUTES
Article Number: 29980 Height: 78in Width: 34in Material: Mild Steel Finish: Powder Coated Color: White Thickness: 11ga Hole Quantity: 8 Fits Enclosure Height: 86in Weight: 116lb
ADDITIONAL PRODUCT DETAILS
Catalog numbers ending in B or BG represent the 2-piece panels, reference drawing configuration 2 in spec sheet. For all other catalog numbers, reference drawing configuration 1 in spec sheet.
Catalog numbers with B suffix include two painted panels bolted together, with top and bottom stiffeners for additional support. Use combination of panels for 3-5 Door Free-Stand Enclosures.
WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.
Our powerful portfolio of brands:
CADDY ERICO HOFFMAN
ILSCO
SCHROFF
TRACHTE
©2025 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.
This document is system-generated.
| nVent.com/HOFFMAN 2
Documents / Resources
 |
nVent A86PM37 Panel for Free-Stand with Mounting Stud [pdf] Owner's Manual A86PM37 Panel for Free-Stand with Mounting Stud, A86PM37, Panel for Free-Stand with Mounting Stud, Stand with Mounting Stud, Mounting Stud |