nVent HOFFMAN D-Box Padlock Kit
Product Information
The D-BoxTM is a product that consists of the following components:
- 1 D-BoxTM unit (1x)
- 2 M4 units (1x)
- 3 Rev. C units (1x)
- P/N 87783976 unit
- P/N 87784864 unit
Product Usage Instructions
Follow the steps below to use the D-BoxTM:
- Ensure that you have all the components mentioned above.
- Connect the D-BoxTM unit to the power source using the provided cables.
- Place the M4 unit in the designated slot on the D-BoxTM unit.
- Insert the Rev. C unit into its corresponding slot on the D-BoxTM unit.
- Make sure all units are securely connected.
- Refer to the P/N units for any additional instructions specific to those components.
For further information or troubleshooting, please refer to the complete user manual.
Overview
Installation
- Insert the hasp (item 1) through the slot in the door and fasten to the mounting stud.
- Insert the staple (item 3) through the slot in the body and press firmly in place.
Contact
- © 2018 Hoffman Enclosures Inc.
- PH 763 422 2211
- • nVent.com/HOFFMAN
Documents / Resources
 |
nVent HOFFMAN D-Box Padlock Kit [pdf] Instruction Manual D-BoxTM, M4, D Box, D Box Padlock Kit, Padlock Kit, Kit |