PUSH IN CONDUIT CLAMP, 1″ EMT, 1.181″–1.378″ OD, 9/32″ HOLE, PLAIN
CATALOG NUMBER
16P
FEATURES
Push-in installation of conduit
Eliminates need for offset bending conduit
May be used for either vertical or horizontal installations
PRODUCT ATTRIBUTES
Material: Spring Steel
Finish: nVent CADDY Armour
EMT Conduit Size: 1″
Outer Diameter: 1.181″ – 1.378″
Hole Size: 9/32″
Hole Type: Plain
Ultimate Static Load 1: 25 lb
Ultimate Static Load 2: 15 lb
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials.
Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.
| North America +1.800.753.9221 Option 1 – Customer Care Option 2 – Technical Support |
Europe Netherlands: +31 800-0200135 France: +33 800 901 793 |
Europe Germany: 800 1890272 Other Countries: +31 13 5835404 |
APAC Shanghai: + 86 21 2412 1618/19 Sydney: +61 2 9751 8500 |
Our powerful portfolio of brands:
nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF
TRACER
© 2023 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners.
nVent reserves the right to change specifications without notice.
Documents / Resources
 |
nVent CADDY 16P Push In Conduit Clamp EMT 9/32in Hole Plain [pdf] Owner's Manual 16P Push In Conduit Clamp EMT 9 32in Hole Plain, 16P, Push In Conduit Clamp EMT 9 32in Hole Plain, In Conduit Clamp EMT 9 32in Hole Plain, Conduit Clamp EMT 9 32in Hole Plain, Clamp EMT 9 32in Hole Plain, EMT 9 32in Hole Plain, Hole Plain, Plain |
