NULLLAB Atomizer Module Programmable Humidifier Module Spray Instructions

Item Description

Support Drop shipping
Mini Humidifier Modulle DC 5V Single Spray Ultrasonic Atomizer Humidifier Module Mist Maker and Driver Circuit Board Type C
Features:

1. 100% brand new high-quality product, made of high-quality materials, compact in size, and easy to install.
2. Convenient application, strong fog volume, large fog volume, continuous spray.
3. Strong universality, stable performance, easy to use, and easy to operate.
4. Support microcontroller linkage, the humidifier module is equipped with a microcontroller control interface, which can be programmed to control its operation through the microcontroller.
5. Wide range of applications: DIY self-made, plant moisturizing, product application, module set is easy to assemble and use. Parameter: Name: Single spray waterless detection humidifier module Material: 1.2mm FR-4 Interface: TYPE-C Rated voltage: DC 5V (power supply) Rated current: 300MA Power: 1.5-2W Atomization frequency: 108KHZ 5KHZ Module: 30 * 30MM Cotton swab: 8 * 100mm Atomization parameters: Drive voltage: 5V Resonant frequency: 108-110KHz 5 Rated power: 2W Number of perforations: 800 Aperture: 4-5UM Silicone sleeve outer diameter: 20MM Rubber ring thickness: 3MM Steel plate diameter: 16 mm Line length: 10CM Wire terminal: PH1.25 interface

Function Description:

1. Water free detection and anti dry burning function
2. Single chip microcomputer programmable control of spray
3. When the power is high, spray, the indicator light is on, and when the power is low, shut down
4. Press once to start spray, the indicator light is on, and press the second time to shut down

Usage method:

1. First, install the atomizer bracket and cotton swab
2. Connect the atomizing plate to the module atomizing plate port
3. Connect the power supply to the module power port again
4.  Press the power switch
5.  Spray when the atomizer meets water

Matters needing attention:

1. It is strictly prohibited to puncture the atomizing plate, and the welding points of the atomizing plate cannot be folded or pulled
2. It is strictly prohibited to power on without connecting the atomizing plate
3. It is strictly prohibited to use fast chargers
4. It is strictly prohibited to modify modules
5. The module must not touch water
6. Full steel sheet (raised surface) in downward contact, cotton swab absorbs water
7.  Rated power input

Package Include: Package 1: 1X module Package 2: Module * 1 Bracket seat * 1 Atomization sheet * 1 Cotton swab * 1

Item Picture

Support Dropshipping

CRYSTAL STAND ATOMIZATION EFFECT

BLACK BRACKEТ ATOMIZATION EFFECT

Microporous Nebuliser

Parameters of nebulising tablets

Name: Microporous atomizing sheet
Drive voltage: 5V
Resonant frequency: 108-110KHZ±5
Rated power: 2W
Aperture: 4-5UM
Wire terminal: PH1.25
Punch number: 800
Outer diameter of silicone sleeve: 20MM
Thickness of rubber ring: 3MM
Steel sheet diameter: 16MM
Line length: 100MM

Usage method

1. install the cotton swab of the atomization plate bracket
2. Connect the atomization plate to the atomization plate port of the module
3. Then connect the power supply to the module’s power port
4. Press the power switch
5. The atomizing plate sprays water immediately upon contact with it

Precautions

1. It is strictly prohibited to puncture the atomization plate. The weld points of the atomization plate must not be bent or torn
2.  It is strictly prohibited to power on without connecting the atomization plate
3. The use of fast chargers is strictly prohibited
4. Modification of modules is strictly prohibited
5. The module must not come into contact with water
6. Contact the cotton swab with the all-steel sheet (the raised surface) facing down to absorb water
7. Rated power input

Working principle
A humidifier misting module typically uses ultrasonic technology to generate water mist. It contains a piezoelectric ceramic disc that begins to vibrate when a high frequency voltage is applied through it. The vibration causes small droplets to form on the surface of the water and disperse them to form a fine mist.
Water mist quality
Humidifier misting modules effectively convert moisture into tiny water particles, usually in the range of 1 to 5 microns. This fine water mist evaporates and spreads more easily in the air, thus providing more effective humidification.
Interact with the single-chip microcomputer
The humidifier module is equipped with a microcontroller control interface, which can be programmed to control its operation.
Waterless induction
Detect whether there is water through the sensor line, spray with water, no water to stop spraying
Working voltage
Power supply 5V

Module size

Single-spray waterless detection humidifier module

Microporous atomizing film display