Nuance Audio Remote Plus setup Instructions

Nuance-Audio-logo

Nuance Audio Remote Plus setup

Nuance-Audio-Remote-Plus-setup-product

Quick Setup & Use

  • Prepare: Remove the battery tab from the Remote before proceeding.
  • Pairing (if needed): When the glasses are on and worn, press and hold the + or − volume button on the frame until the blue LED blinks. Then press the side button and hold for 8 seconds.
  • Enter setup mode: Press and hold both (+) and (−) for 2 seconds.
  • Select language: Hear languages, scroll with +/−, and confirm with the top button.
  • Calibrate: Repeat the on-glasses sequence “1, 2, 3, 4.” Then repeat “1, 2, 3, 4” as prompted for own-voice calibration and continue until completed.
  • Finish: Setup is complete once enough data has been collected.
  • Optional navigation: Next language (+); previous language (−); exit setup by pressing and holding the side button for 2 seconds.
  • During use: Volume up (+) / volume down (−). Switch audio mode with the top button.

Remote Plus guided onboarding

Setup Flow

  • The Remote Plus is used to activate and set up your eyewear.
  • It guides you through onboarding, lets you choose your preferred language, and helps you through a quick personal calibration so everything feels just right for you.

Nuance-Audio-Remote-Plus-setup-fig-1

Get ready

  1. Glasses and Remote Plus are paired
  2. Glasses are on and worn
  3. Quiet room

Pairing options

  1. Pre-paired hard bundle
  2. Store Associate pairs in store
  3. User pairs at home

Enter setup mode

  1. Press and hold +/- buttons

Glasses measure environmental noise to proceed

Select language

  1. Hear languages
  2. Scroll with +/-
  3. Confirm with top button

Audio prompts are used for calibration feedback

Calibrat

  1. Glasses:
    “Repeat after me: 1, 2, 3, 4”
  2. User: “1, 2, 3, 4”
  3. Continue…

Audio prompts are used for calibration feedback
User voice is used for own-voice calibration

Done

  • Setup complete once enough data has been collected

Frame Pairing and Setup

Pairing

  • Remove the battery tab from the Remote before proceeding. When the Glasses are on, press and hold the “+” or “-” volume button on the frame until blue LED blinks. Then, press side button and hold for 8 seconds.

Nuance-Audio-Remote-Plus-setup-fig-2

Factory Reset

  • Press top button and side button. Hold both for 8 seconds.

Nuance-Audio-Remote-Plus-setup-fig-3

 

Remote Plus user interface

Frame Pairing and Setup

Enter setup mode

  • Press and hold both (+) and (-) for 2 seconds.

Nuance-Audio-Remote-Plus-setup-fig-4

OK

  • Press top button

Nuance-Audio-Remote-Plus-setup-fig-5

Exit setup

  • Press side button and hold for 2 seconds.

Nuance-Audio-Remote-Plus-setup-fig-6

Frame Setup

Next language

  • Press (+)

Nuance-Audio-Remote-Plus-setup-fig-7

Previous language

  • Press (-)

Nuance-Audio-Remote-Plus-setup-fig-8

Hearing

Volume up

  • Press (+)

Nuance-Audio-Remote-Plus-setup-fig-9

Volume down

  • Press (-)

Nuance-Audio-Remote-Plus-setup-fig-10

  • Switch audio mode Press top button

Nuance-Audio-Remote-Plus-setup-fig-11

Cycle preset up

  • Press the side button and hold for 1 second.

Nuance-Audio-Remote-Plus-setup-fig-12

Call

Answer call

  • Press top button

Nuance-Audio-Remote-Plus-setup-fig-13

End call

  • Press top button

Nuance-Audio-Remote-Plus-setup-fig-14

Troubleshooting

  • Factory reset: If you need to reset the Remote Plus, press the top button and side button together, and hold both for 8 seconds.
  • Re-enter/leave setup: If you enter setup unintentionally or need to return to setup screens, use the frame controls to press and hold (+) and (−) for 2 seconds to enter setup mode, and press and hold the side button for 2 seconds to exit setup.
  • Setup completion: If setup does not finish, continue until enough data has been collected (the manual states setup completes once sufficient data is collected).

Need more support

Watch the Remote Plus Onboarding video

Documents / Resources

PDF thumbnailRemote Plus setup
Instructions · Nuance Audio, Remote Plus, remote control, wearable remote

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.