Novsix E27 Light Socket Splitter User Guide

Novsix E27 Light Socket 
Splitter User Guide

Product Overview

This 5-in-1 E27 light socket splitter is designed to expand a single standard E27 Edison screw base into five independent E27 lamp sockets. Equipped with flexible adjustable arms (180° rotatable), it allows multi-angle lighting arrangement to meet diverse lighting needs of homes, studios, offices, and commercial spaces. Made of high-quality flame-retardant ABS and heat-resistant ceramic components, it ensures safe and stable operation, complying with CE and RoHS international safety standards.

Technical Specifications

Package Contents

Installation Steps

Critical Safety Precaution: Cut off the power supply at the circuit breaker before installation to avoid electric shock!

1. Confirm the original E27 lamp holder is powered off and has completely cooled down.
2. Align the E27 input base of the splitter with the original lamp holder, and screw it firmly clockwise until tight.
3. Adjust the 5 flexible arms to the desired angle (rotatable 180°) to meet your lighting layout needs.
4. Screw E27 standard bulbs into each of the 5 output sockets one by one (do not over-tighten).
5. Check that all bulbs are securely installed, then restore the power supply and test the lighting.

Operation & Adjustment

1. Angle Adjustment: Gently bend the metal arm of each socket to rotate 180° freely, adjust the lighting direction to cover the required area, and ensure the arm is fixed firmly to avoid shaking.
2. Bulb Replacement: Cut off the power first, unscrew the faulty bulb from the socket, and screw in a new E27 bulb (match the single socket load standard).
3. Load Control: Always ensure the total power of all connected bulbs does not exceed 75W. It is strongly recommended to use LED bulbs (≤15W per socket) for better safety and energy saving.

Safety Warnings

1. Overload Prohibition: The total power of all connected bulbs must not exceed 75W.
   Using high-wattage incandescent bulbs will cause overheating, which may lead to fire hazards.
2. Indoor Use Only: Do not use this product in outdoor, damp, or corrosive gas environments to prevent short circuits and component damage