NOVASTAR MX6000 Pro LED Display Controller
Specifications
- Product: MX6000 Pro LED Display Controller
- Document Version: V1.4.1
- Release Date: 2024-08-13
- Display Size: 7-inch IPS touchscreen
- Input Cards: MX_4xHDMI 2.0, MX_2xHDMI 2.1
- Supported File Systems: NTFS, FAT32
- Cable Recommendation: UGREEN HDMI 2.1 up to 5 meters
Front Panel
The front panel of the MX6000 Pro includes the following components:
- Running indicator displaying device status
- Standby button for power control
- USB 2.0 port for exporting diagnostic results
- 7-inch IPS touchscreen for displaying status and settings
- Knob for menu navigation and parameter adjustment
Front Panel Functions
- Solid red light indicates standby mode.
- Solid blue light means the device is powering on.
- Solid green light shows normal device operation.
- Flashing red light indicates abnormal operation.
- Press standby button to power on/off the device.
- Hold standby button for 5-10s to restart the device.
- Connect USB drive to export diagnostic results in NTFS or FAT32
format.
Rear Panel
The rear panel of the MX6000 Pro includes various card slots for input and output cards:
- IN x slots are for input cards (e.g., IN 1 for first input card slot).
- OUT x slots are for output cards (e.g., OUT 6 for sixth output card slot).
- MVR slot is for MVR cards.
- CTRL slot is for control cards.
Input Cards
- MX_4xHDMI 2.0 input card:
- Qty: 4 HDMI 2.0 ports
- Resolutions: Various supported resolutions
- HDR Support: Yes, HDR10 and HLG supported
- HDCP Compliance: HDCP 2.2 compliant
- Cable Recommendation: UGREEN HDMI 2.1 up to 5 meters
- MX_2xHDMI 2.1 input card:
- Qty: 2 HDMI 2.1 ports
- Resolutions: Various supported resolutions
- HDR Support: Yes, HDR10 and HLG supported
- HDCP Compliance: HDCP 2.2 compliant
- Cable Recommendation: UGREEN HDMI 2.1 up to 5 meters
Frequently Asked Questions
Q: What file systems are supported for exporting diagnostic results?
A: The MX6000 Pro supports exporting diagnostic results in NTFS and FAT32 file systems only.
Q: How do I restart the device?
A: Hold down the standby button on the front panel for 5-10 seconds to restart the MX6000 Pro.
Documents / Resources
 |
NOVASTAR MX6000 Pro LED Display Controller [pdf] User Manual MX6000 Pro LED Display Controller, MX6000 Pro, LED Display Controller, Display Controller, Controller |