A8M Smart Wi-Fi Matter NOUS Socket Instruction Manual

A8M Smart Wi-Fi Matter NOUS Socket

Specifications:

  • Capacity: 16A
  • Function: Energy monitoring and recording of electricity
    consumption

Product Usage Instructions:

Preventive Measures:

Ensure the following preventive measures are taken into
account:

  • Design and Controls: The device features an
    indicator that shows the current status and a button for turning
    the device on/off or resetting settings.
  • Connection: To connect the device, use a
    smartphone with the Nous Smart Home app installed. Ensure all
    necessary permissions are granted and a new user is
    registered.

Connecting the Device to Wi-Fi Network:

  1. Connect your smartphone to a 2.4 GHz Wi-Fi network.
  2. Turn on the device.
  3. Open the Nous Smart Home app and click on “Add New
    Device”.
  4. Follow the on-screen instructions to pair the device with the
    app.
  5. If auto-scan doesn’t detect the device, manually select it from
    the list under Smart Sockets category.
  6. Verify the access point name, enter the password, and proceed
    with the connection.
  7. Complete the setup by naming the device and selecting the room
    it is in.

Frequently Asked Questions (FAQ):

Q: What hubs are required for connection via different
platforms?

A: The required hubs for connection are as follows:

  • For Google Home/Google Nest: Google Nest Hub
    (2nd generation or later), Google Nest Hub Max, Google Nest
    Mini/Google Home Mini, Google Nest Audio, Google Nest Wifi
    Pro.
  • For Apple HomeKit: Apple HomePod, Apple
    HomePod mini, Apple TV 4K (2022 or later with Thread support).
  • For Amazon Alexa: Amazon Echo (4th
    generation), Amazon Echo Dot (5th generation), Amazon Echo Show 10,
    Amazon Echo Studio, eero Pro 6.
  • For Samsung SmartThings: SmartThings Hub (v3),
    SmartThings Station.

“`

OPERATING MANUAL
description
The smart Wi-Fi Matter NOUS A8M socket (hereinafter referred to as the smart socket) is designed to organize automatic and manual switching off of electrical appliances in the room, by remote access via the Internet, using a smartphone or tablet with the Nous Smart Home application installed. Communication with the smart socket is configured via a cloud server using the P2P protocol, for which a wireless Wi-Fi adapter is used. The smart socket is equipped with a mechanical button and a light indication of the device status. The smart socket is equipped with an electromechanical relay
with a capacity of 16A . The device has the function of energy monitoring and recording of electricity
consumption.
WARNING:
Required hubs for connection via Matter 1. For Google Home/Google Nest You need one of these devices:
Google Nest Hub (2nd generation or later) Google Nest Hub Max
Google Nest Mini/Google Home Mini (with updated firmware) Google Nest Audio
Google Nest Wifi Pro (Matter-enabled router) 2. For Apple HomeKit
You need one of these devices: Apple HomePod (any generation)
Apple HomePod mini Apple TV 4K (2022 or later with Thread support)
3. For Amazon Alexa You need one of these devices: Amazon Echo (4th generation) Amazon Echo Dot (5th generation) Amazon Echo Show 10 (3rd generation)
Amazon Echo Studio
1

eero Pro 6 (Matter-enabled router) 4. For Samsung SmartThings
Need: SmartThings Hub (v3) SmartThings Station
PREVENTIVE MEASURES
Read these instructions carefully. Use the product within the temperature and humidity limits specified in the technical data sheet. Do not install the product near heat sources, such as radiators, etc. Do not allow the device to fall or be subjected to mechanical stress. Do not use chemically active or abrasive cleaning agents to clean the product. Use a damp flannel cloth. Do not overload the specified capacity. This may cause a short circuit and electric shock. Do not disassemble the product yourself – diagnostics and repair of the device should only be carried out at a certified service center.
Design and controls
2

Name

1

Indicator

description Shows the current status of the device

A short press of the button switches the device “ON” “OFF”. A

2

Button

long press of the button (5-7 C) resets the smart socket settings

and Wi-Fi network connection parameters.

Connection
To connect the bulb, you need a smartphone based on the Android or iOS mobile operating system with the Nous Smart Home application installed. This mobile application is free and available for download from the Play Market and App Store. The QR code for the application is given below:

3

After installing the application, for it to work correctly, you need to grant it all permissions in the appropriate section of your smartphone settings. Then you need to register a new user of this application.
To connect your device to a Wi-Fi network:

Connect your smartphone to the access point that will be used to connect the device. Make sure the

1

network frequency range is 2.4 GHz, otherwise the device will not connect as it is not designed to work

with 5 GHz Wi-Fi networks.

2

Turn on the device.

3

Open the Nous Smart Home app and click the add new device button.

4

An auto-scan will appear, prompting you to add a new device. Confirm the connection and start pairing.

5

If auto-scan doesn’t see your device, you can select it manually from the device list.

6

In the “Add manually” tab, select the “Smart sockets” category, and in it the model “A8M socket”, as shown in the figure above;

7

In the window that opens, select “next step” and click the “Next” button.

4

8

In the next window, make sure that the name of the access point matches the required one, then enter the password for it in the line below and click the “Next” button.

9

A window will appear indicating the degree of network connection and adding the current user of the application to the list of devices.

10

Once the procedure is complete, a window will appear where you can name the device and select the room it is in. The device name will also be used by Amazon Alexa and Google Home.

11

Adding a device to the Nous Smart Home app using a QR code.

12

In the “Add Manually” tab, select “Scan” as shown in the figure below.

13

Next, scan the QR code and wait for the device to appear in the app.

14

To delete all data from the device, you need to “Delete device”, “turn off and delete all data” in the device menu.

When a device is removed from the user’s device list in the application, the light bulb settings are reset to factory settings and you will need to go through the Wi-Fi connection procedure again. If the password for the Wi-Fi access point was entered incorrectly, the application will display a “Failed to connect to Wi-Fi” window after the timer expires, offering
step-by-step steps to resolve the issue.

Connection via Matter protocol (Google Home, Apple HomeKit, Alexa)
1. Google Home
1. Open Google Home “+” “Add device” . 2. Select “Matter Protocol Devices” . 3. Scan the QR code on the light bulb or enter the code manually. 4. Assign a room done!
5

2. Apple HomeKit
1. Open the Home app “+” “Add device” . 2. Point the camera at the QR code on the light bulb. 3. Confirm addition assign room.
3. Amazon Alexa (via Matter)
1. Open the Alexa app “Devices” “+” “Add Device” . 2. Select “Matter” “Scan for devices” . 3. Alexa will find the light bulb confirm the addition. 4. Assign a name and group (for example, “Living Room”).
If Alexa doesn’t see the light bulb:
Make sure the bulb is in connection mode (blinking). Restart the bulb (turn it off/on). Update the Alexa app.
Importantly!
To work through Matter, your hub must be on the same local network as the device. Some features (e.g. advanced scenarios) may only be available through the native Nous Smart Home app If you are having connection problems, try:
Reboot the hub Update hub firmware Reset device For further assistance, please contact NOUS support.
6

Documents / Resources

nous A8M Smart Wi-Fi Matter NOUS Socket [pdf] Instruction Manual
A8M Smart Wi-Fi Matter NOUS Socket, A8M, Smart Wi-Fi Matter NOUS Socket, Wi-Fi Matter NOUS Socket, Matter NOUS Socket, NOUS Socket, Socket

References

Leave a comment

Your email address will not be published. Required fields are marked *