nofio LogoFor Valve Index
User Manual

NOFIO BASE

Connect nofio base to PC using provided DisplayPort and usb-c to usb-a cablesnofio NWADP6E3 Wireless Adapter for Valve Index - PC usingPower your nofio base using Valve Index power supply

nofio NWADP6E3 Wireless Adapter for Valve Index - power supplyOnce connected, push button on the back to power on.nofio NWADP6E3 Wireless Adapter for Valve Index - power on.

BATTERY STRAP

Thread the battery strap to the lower bottom bracket as shownnofio NWADP6E3 Wireless Adapter for Valve Index - battery strapLoop the strap to the upper bottom bracket as shownnofio NWADP6E3 Wireless Adapter for Valve Index - upper bottomHook the strap through the top bracket as shown nofio NWADP6E3 Wireless Adapter for Valve Index - Hook

MOUNTING PLATES

Align head plate nofio NWADP6E3 Wireless Adapter for Valve Index - Align head plateSecure using large O ringsnofio NWADP6E3 Wireless Adapter for Valve Index - SecureAlign battery platenofio NWADP6E3 Wireless Adapter for Valve Index - Align batterySecure using small O ringnofio NWADP6E3 Wireless Adapter for Valve Index - Secure 1

NOFIO HEAD

statement: End-users must provide at least 25 mm separation between the device and the user’s head. (only for POO8H head unit)

Align nofio head to head platenofio NWADP6E3 Wireless Adapter for Valve Index - Align nofio headSecure nofio head to head platenofio NWADP6E3 Wireless Adapter for Valve Index - Secure nofioFIRMLY plug Oculink cable to nofio head nofio NWADP6E3 Wireless Adapter for Valve Index - FIRMLY plugPlug opposite side of nofio Oculink cable to Indexnofio NWADP6E3 Wireless Adapter for Valve Index - Oculink

NOFLO BATTERY

Slide nofio battery into battery mounting plate.
Secure with battery strap.nofio NWADP6E3 Wireless Adapter for Valve Index - battery 1Connect nofio head with nofio battery using provided usb c cable nofio NWADP6E3 Wireless Adapter for Valve Index - c cableOnce connected, push button on the top to power on.nofio NWADP6E3 Wireless Adapter for Valve Index -connected

NOFIO APP

Install nofio app from Steam store and launch.
Happy playing!nofio NWADP6E3 Wireless Adapter for Valve Index - nofio app

HOT SWAP

Plug in secondary battery to opposite usb-c portnofio NWADP6E3 Wireless Adapter for Valve Index - secondaryOnce new battery lights up, unplug old battery and remove from battery mountnofio NWADP6E3 Wireless Adapter for Valve Index - battery lightsSecure new battery to battery mountnofio NWADP6E3 Wireless Adapter for Valve Index - battery mountCharge old battery through the usb-c portnofio NWADP6E3 Wireless Adapter for Valve Index - Charge

SCAN FOR VIDEO INSTRUCTIONS + NOFIo SOCIALS

nofio NWADP6E3 Wireless Adapter for Valve Index - QR Cordhttps://linktr.ee/nofio_co?utm_source=qr_code

POWEREO By:
nofio NWADP6E3 Wireless Adapter for Valve Index - Symbol

nofio Logo
Nofio Pty Ltd
Brisbane, Australia

NOFI’S TIPS

Keep nofio base clear of any obstructions
Do not block/cover the nofio head and base fans
Keep nofio base in the same room as playing areanofio NWADP6E3 Wireless Adapter for Valve Index - base clear

BOX CONTENTS

nofio NWADP6E3 Wireless Adapter for Valve Index - Box Contents

LIGHT INDICATIOR

nofio NWADP6E3 Wireless Adapter for Valve Index - battery

NO LIGHT No power. Connect to power source.
SOLID BLUE  Successful booting, waiting for use
SOLID GREEN  Booted and paired, happy playing!
FLASHING BLUE Software updating, Device Pairing Powering up
SOUD RED Failed to setup on boot
Thermal high, let device cool
FLASHING RED Power issue, Check connection to device (12V 2.5A)

Troubleshooting

nofio NWADP6E3 Wireless Adapter for Valve Index - Discord Troubleshooting tips can be found on the nofio website and the official nofio Discord channel. This list will be regularly updated by the nofio team as we discover and solve hiccups.
Need some guidance? For further support, please head to the official nofio Discord channel or reach out to hello@nofio.co

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet.
operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communication with unmanned aircraft systems.
This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Operation in the band is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Statement for Base POO8B: This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.
In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shail not be less than 20cm (8 inches) during normal operation.
Hereby, Nofio Pty Ltd. declares that this Nofio Wireless Adapter (POO8H and PO08B) is in compliance with the essential requirements and other relevant provisions of RE Directive 2014/53/EU. The declaration of conformity may be consulted at www.nofio.co/DoC.pdf.

RED Declaration of Conformity (DoC)

Unique identification of this DoC: …………….

We,
Nofio Pty Ltd
55 Barry Parade Fortitude Valley QLD 4006 AUSTRALIA
declare under our sole responsibility that the product:
product name: Nofio wireless adapter
trade name: Nofio
type or model: P008B, P008H
relevant supplementary information: ……………………………………………………………………
(e.g. lot, batch or serial number, sources and numbers of items) with the essential requirements and other relevant requirements of th RED Directive (2014/53/EU).
The product is in conformity with the following standards and/or other normative documents:
HEALTH & SAFETY (Art. 3(1)(a)): EN IEC 62368-1:2020/A11:2020, EN 50665:2017, EN 62311:2008
EMC (Art. 3(1)(b)): EN 301 489-1 V2.2.3:2019; EN 301 489-17 V3.2.4:2020; EN 55032:2015/A11:2020, EN 55035:2017/A11:2020
SPECTRUM (Art. 3(2)): EN 303 687 V1.1.1:2023
OTHER (incl. Art. 3(3) and voluntary specs):
The conformity assessment procedure referred to Article 17 and Annex III of the RED directive has been followed with involvement of Notified Body.
Notified Body: TÜV SÜD Danmark ApS
Identification number: 2443
Certificate No: DK-RED002882 i01
Other Union harmonization legislation (where applicable):
Accessories: N/A
Software: N/A
Technical file held by:
Place and date of issue (of this DoC): AUSTRALIA 2023-12-25
Signed by or for the manufacturer: .. Nofio Pty Ltd
(Signature of authorised person)
Name (in print): Phil Purdy
nofio NWADP6E3 Wireless Adapter for Valve Index - Signature
Title: Engineer

nofio NWADP6E3 Wireless Adapter for Valve Index - Symbol 1

steelseries AEROX 3 Wireless Optical Gaming Mouse - ICON8 Nofio Wireless Adapter
P008B and P008H
P008H : FCC ID: 2BDFI-NWADP6E4
P008B : FCC ID: 2BDFI-NWADP6E3
nofio NWADP6E3 Wireless Adapter for Valve Index - Symbol 2 IntoFree

nofio NWADP6E3 Wireless Adapter for Valve Index - Symbol 3 011-230065
011-230066
Frequency operating range:
5925Mhz – 6425MHz / 5925Mhz – 7125MHz
Max output power: 12dBm

nofio LogoMade In China
Designed in Australia
www.nofio.co
Nofio Pty Ltd
Brisbane, AUSTRALIA

Documents / Resources

nofio NWADP6E3 Wireless Adapter for Valve Index [pdf] User Manual
NWADP6E3 Wireless Adapter for Valve Index, NWADP6E3, Wireless Adapter for Valve Index, Adapter for Valve Index, Valve Index, Index

References

Leave a comment

Your email address will not be published. Required fields are marked *