NOCK Cover Insert Deck Frame Instruction Manual

NOCK Cover Insert Deck Frame

Specifications

NOCK Deck Frame, 7 meters

• 1 X (unspecified component)
• 1 X (unspecified component)
• 4 X (35 mm / 1.45 m)
• 1 X (35 mm / 1.2 m)
• 2 X (35 mm / 0.7-1.4 m)
• 2 X (35 mm / 1-1.9 m)
• 6 X (35 mm / 1-1.9 m)
• 6 X (30 mm / 0.3 m)
• 2 X (35 mm / 0.25 m)
• 10 X (35 mm x 9 cm)
• 1 X (8 mm)

NOCK Deck Frame, 8 meters

• 1 X (unspecified component)
• 1 X (unspecified component)
• 5 X (35 mm / 1.45 m)
• 1 X (35 mm / 0.75 m)
• 2 X (35 mm / 0.7-1.4 m)
• 2 X (35 mm / 1-1.9 m)
• 6 X (35 mm / 1-1.9 m)
• 7 X (30 mm / 0.3 m)
• 2 X (35 mm / 0.25 m)
• 10 X (35 mm x 9 cm)
• 1 X (8 mm)

Usage Instructions

Important Safety Information

• Always be two people during assembly.
• Read the manual before assembly.
• Warning: Pinch Hazard.
• Wear work gloves.

Installation Overview (7-meter Deck Frame)

Refer to the diagram for component placement.

1. Identify components:
   • a: 2 X Pulpit leg (Stern side)
   • b: 4 X Overlaying tube
   • c: 1 X Overlaying tube
   • d: Connector overlying tube
   • e: T-connector
   • f: 6 X Deck leg
   • g: 2 X Pulpit leg (Bow side)
   • h: End Elbow
2. Assemble the frame according to the visual guide, connecting components (a), (b), (c), (d), (e), (f), (g), and (h) as shown.

Installation Overview (8-meter Deck Frame)

Refer to the diagram for component placement.

1. Identify components:
   • a: 2 X Pulpit leg (Stern side)
   • b: 5 X Overlaying tube
   • c: 1 X Overlaying tube
   • d: Connector overlying tube
   • e: T-connector
   • f: 6 X Deck leg
   • g: 2 X Pulpit leg (Bow side)
   • h: End Elbow
2. Assemble the frame according to the visual guide, connecting components (a), (b), (c), (d), (e), (f), (g), and (h) as shown.

PRECUATION

Attention

1. Always be two people during assembly
2. Read the manual before assembly
3. Call us if you have any questions!

Warning: pinch hazard
Wear work gloves

Contents

Installation overview

NOCK , 7 meter

NOCK  8 meter

ContentsInstallation overview NOCK  9 meter
Contents Installation overviewNOCK  10 meter
Contents Installation overviewNOCK  11 meter
Contents

Installation overview 

NOCK 12 meter
Contents

Installation overview

Start at the stern

Attach the top tube to the supports you started withAdjust the support legsRepeat steps 4 and 5 for the middle support legs resting on the deckRepeat steps 3, 4 and 5 for the front support legs attached to the pulpit Distribute the support legs evenly

Troubleshooting

• Difficulty assembling components: Ensure all parts are correctly oriented. Some connections may require firm pressure. Always work with two people.
• Missing parts: Double-check the contents against the specifications list for your model (7m or 8m). If parts are genuinely missing, please contact us.
• Unstable frame: Ensure all connections are fully secured. Verify that all legs (pulpit and deck legs) are properly installed and making firm contact with the ground/deck.