1. Introduksjon
This manual provides instructions for the safe and efficient operation, maintenance, and troubleshooting of your oneisall PP02 Pet Air Purifier. This device is designed to improve indoor air quality by capturing pet hair, dander, and odors, utilizing a multi-layer filtration system.
2. Viktige sikkerhetsinstruksjoner
Please read and save these safety instructions before operating the air purifier to reduce the risk of fire, electric shock, or injury.
- Trekk alltid ut støpselet til luftrenseren før du flytter, rengjør eller utfører vedlikehold.
- Ikke bruk enheten hvis strømledningen eller støpselet er skadet.
- Hold luftrenseren unna vann eller våte områder.
- Ikke stikk fingre eller fremmedlegemer inn i luftinntakene eller -utløpene.
- Ensure the air inlets and outlets are not blocked.
- Use only genuine oneisall replacement filters.
- Dette apparatet er ikke beregnet for bruk av personer (inkludert barn) med reduserte fysiske, sensoriske eller mentale evner, eller mangel på erfaring og kunnskap, med mindre de har fått tilsyn eller instruksjoner om bruk av apparatet av en person som er ansvarlig for deres sikkerhet. .
3. Pakkens innhold
Bekreft at alle varene er til stede i pakken:
- oneisall PP02 Luftrenser for kjæledyr
- HEPA Filter (Pre-installed)
- Rengjøringsbørste
- Brukerhåndbok
4. Produktet er overview
The oneisall PP02 Pet Air Purifier features dual-sided air intakes and a multi-stage filtration system to effectively capture pet hair, dander, and odors.

Figur 4.1: eksploderte view of the oneisall PP02 Pet Air Purifier, illustrating the dual-side air inlets and the internal multi-layer filtration system. This design allows for efficient capture of pet fur and airborne particles.
Nøkkelkomponenter:
- Kontrollpanel: Located on the top, with a digital display for air quality and fan speed.
- Doble luftinntak: Located on the sides, designed to maximize pet hair capture.
- Luftuttak: Located on the top for purified air release.
- Forfilter: Captures large particles like pet hair and dust.
- HEPA -filter: Captures fine particles such as dander and allergens.
- Aktivert karbonfilter: Absorbs odors from pets, cooking, and other sources.
5. Oppsett og plassering
- Pakke ut: Ta luftrenseren forsiktig ut av emballasjen.
- Filterinstallasjon: The HEPA filter is typically pre-installed. Open the filter compartment (refer to Figure 4.1 for location) and ensure all packaging materials are removed from the filter before use. Close the compartment securely.
- Plassering: Place the air purifier on a firm, level surface. Ensure there is at least 15 cm (6 inches) of space around all sides for optimal airflow. Avoid placing it directly against walls or furniture.
- Strømtilkobling: Koble strømledningen til en vanlig stikkontakt.

Figur 5.1: The oneisall PP02 Pet Air Purifier positioned in a living room, demonstrating its ability to purify air in open-plan spaces. The unit is designed for efficient air circulation.
6. Bruksanvisning
The oneisall PP02 features intelligent controls for ease of use.
- Slå på/av: Trykk på av/på-knappen på kontrollpanelet for å slå enheten av eller på.
- Justering av viftehastighet: Cycle through available fan speeds (e.g., Low, Medium, High) by pressing the Fan Speed button.
- Automatisk modus: Activate Auto Mode by pressing the Auto button. In this mode, smart sensors monitor air quality in real-time and automatically adjust the fan speed based on detected pollutants (pets, odors, cooking fumes). When air quality improves, the unit shifts to a quieter mode.
- Sove modus: Select Sleep Mode for quiet operation during rest periods. The display lights may dim or turn off.
- Timer funksjon: Use the Timer button to set the operating duration (e.g., 2H, 4H, 8H). The unit will automatically turn off after the set time.

Figur 6.1: The control panel of the oneisall PP02 Pet Air Purifier, showing the real-time air quality indicator (PM2.5) and current fan speed. The display changes color to indicate air quality status (Good, Fair, Poor).

Figur 6.2: The oneisall PP02 Pet Air Purifier operating in a bedroom, highlighting its quiet operation (25dB) for undisturbed rest.
7. Vedlikehold
Regelmessig vedlikehold sikrer optimal ytelse og forlenger levetiden til luftrenseren din.
7.1 Rengjøring av forfilter
The pre-filter is designed to capture large particles like pet hair and dust. It can be easily cleaned to maintain efficiency.
- Slå av: Koble luftrenseren fra strømuttaket.
- Åpne deksel: Åpne lokket til filterrommet.
- Fjern forfilter: Fjern forfilteret forsiktig.
- Rengjøre: Use the provided cleaning brush to brush away accumulated hair and dust from the pre-filter. The pre-filter is also washable; rinse it under running water if necessary. Ensure it is completely dry before reinstallation.
- Installer på nytt: Place the clean pre-filter back into the compartment and close the cover securely.

Figur 7.1: Illustration of the pre-filter cleaning process. The image on the left shows using a brush to remove pet hair and dust, while the image on the right demonstrates rinsing the washable pre-filter under water. Ensure the filter is dry before reinstallation.
7.2 Utskifting av HEPA- og aktivt kullfilter
The HEPA and Activated Carbon filters are not washable and must be replaced periodically. The filter life indicator on the control panel will alert you when replacement is needed. Filter replacement frequency depends on usage and air quality.
- Slå av: Koble fra luftrenseren.
- Åpne deksel: Åpne filterrommet.
- Fjern gammelt filter: Carefully remove the used HEPA and Activated Carbon filter assembly.
- Installer nytt filter: Insert a new oneisall replacement filter, ensuring it is correctly oriented.
- Lukk dekselet: Lukk filterrommet godt.
- Reset Filter Life Indicator: After replacing the filter, press and hold the Filter Reset button (if available, or refer to the control panel diagram) for 3-5 seconds to reset the filter life indicator.

Figur 7.2: A visual comparison between a used oneisall filter (left) and a new filter (right), demonstrating the significant amount of pet fur and particles captured by the filtration system over time. This highlights the need for regular filter maintenance and replacement.

Figur 7.3: The oneisall PP02 Pet Air Purifier positioned near a cat and its litter box, illustrating its effectiveness in removing pet odors. The unit features a double activated carbon filter for enhanced odor absorption.
8. Feilsøking
| Problem | Mulig årsak | Løsning |
|---|---|---|
| Enheten slår seg ikke på. | Ingen strømforsyning. Strømledningen er ikke ordentlig tilkoblet. | Sjekk om strømuttaket fungerer. Ensure the power cord is firmly plugged into the unit and the outlet. |
| Luftstrømmen er svak eller støyende. | Filtrene er skitne eller tilstoppede. Luftinntak/uttak er blokkert. | Clean the pre-filter. Replace the HEPA and Activated Carbon filter if necessary. Sørg for at ingenting blokkerer luftinntakene eller -utløpene. |
| Odor is still present. | Aktivkullfilteret er mettet. Enheten er for liten i forhold til romstørrelsen. | Replace the HEPA and Activated Carbon filter. Ensure the unit is placed optimally and consider its coverage area. |
| Air quality indicator is always "Poor". | High levels of pollutants in the environment. Sensoren er skitten. | Allow the unit to run longer on a higher fan speed. Gently clean the air quality sensor (refer to product diagram for location) with a dry cotton swab. |
9. Spesifikasjoner
| Modellnummer | PP02 |
| Merke | oneisall |
| CADR (ren luft levering rate) | 320 m³/t (188 CFM) |
| Dekningsområde | Up to 470 sq ft (20 minutes) / 1410 sq ft (60 minutes) |
| Filtreringssystem | Pre-filter, HEPA Filter, High-Density Activated Carbon Filter |
| Strømforbruk | 36W |
| Støynivå | As low as 25dB (in quiet mode) |
| ASIN | B0GDFTQPX2 |
10. Garanti og støtte
For warranty information or technical support, please contact oneisall customer service. Refer to the product packaging or the official oneisall webnettsted for kontaktinformasjon.
Webnettsted: oneisall Official Store





