GDFStudio Full Size Floor Platform Bed with Fence and Door - Instruction Manual

1. Introduksjon

Thank you for choosing the GDFStudio Full Size Floor Platform Bed with Fence and Door. This manual provides detailed instructions for the assembly, operation, and maintenance of your new bed frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

2. Sikkerhetsinformasjon

• Voksensamling kreves: This product must be assembled by adults. Keep children away during assembly.
• Les instruksjoner: Ensure all instructions are read and understood before assembly and use.
• Sjekk alle deler: Verify that all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
• Use on Level Surface: Assemble and use the bed on a flat, stable, and level surface to prevent tipping.
• Stram festemidler: Periodically check and tighten all fasteners to ensure the bed remains stable. Do not overtighten.
• Vektgrense: Do not exceed the recommended weight limit for a full-size bed frame.
• Ingen boksmadrass nødvendig: This platform bed is designed for use without a box spring. Using a box spring may raise the mattress height excessively.

3. Pakkens innhold

Before assembly, please ensure all components listed below are present in your package. If any parts are missing or damaged, please contact customer support.

Image: Detailed diagram illustrating all components and their respective dimensions for the bed frame.

Komponentliste:

• Paneler for hodegavl/fotgavl
• Side Rails with Fence
• Dørpanel
• Støttelameller
• Center Support Legs (if applicable)
• Maskinvarepakke (skruer, bolter, unbrakonøkkel)
• Bruksanvisning

4. Oppsett og montering

Follow these steps carefully for a smooth assembly process. It is recommended to assemble the bed with two adults.

1. Pakk ut komponenter: Carefully remove all parts from the packaging and lay them out on a clean, soft surface (like a carpet) to prevent scratches.
2. Monter sideskinner: Attach the side rails to the headboard and footboard panels using the provided hardware. Ensure all connections are secure but do not fully tighten until the frame is complete.
3. Installer dør: Attach the door panel to the designated opening on the side rail using the hinges and latch provided. Ensure the door swings freely and latches securely.


Image: Detail of the door's hinge and latch for secure closure.

4. Place Support Slats: Lay the wooden support slats across the bed frame. Ensure they are evenly spaced and secured to the side rails as per the instructions. These slats provide mattress support and eliminate the need for a box spring.


Bilde: View of the sturdy wooden slats providing mattress support.

5. Endelig tilstramming: Once all parts are assembled, go back and fully tighten all screws and bolts. Do not overtighten to avoid damaging the wood.
6. Sengens posisjon: Flytt den monterte sengerammen forsiktig til ønsket plassering.

5. Bruksanvisning

This floor platform bed is designed for direct mattress placement. No box spring is required. The integrated fence and door provide a secure and enclosed sleeping area.

• Madrassplassering: Place your full-size mattress directly onto the wooden support slats.
• Dørfunksjonalitet: The small door allows for easy entry and exit. Ensure the latch is properly engaged when the door is closed to keep it secure.
• Lav Profile Design: The low height of the bed makes it easily accessible.

Image: The assembled bed frame with a mattress and decorative items, showcasing det er lavprofftfile design and fence.

6. Vedlikehold

• Rengjøring: Tørk av trerammen med en myk klutamp klut. Unngå sterke kjemikalier eller slipende rengjøringsmidler som kan skade overflaten.
• Regelmessig inspeksjon: Sjekk regelmessig alle bolter og skruer for å sikre at de er stramme. Stram til om nødvendig.
• Unngå fuktighet: Hold sengen unna overdreven fuktighet eller direkte sollys for å forhindre at treverket vrir seg eller falmer.

7. Feilsøking

Vanlige problemer og løsninger:

• Sengen føles ustø: Sørg for at alle bolter og skruer er godt strammet. Sjekk at sengen står på en jevn overflate.
• Slats are not fitting: Double-check that the side rails are correctly installed and that the slats are oriented properly.
• Døren lukkes ikke ordentlig: Inspect hinges and latch for any obstructions or misalignment. Adjust if needed.

8. Spesifikasjoner

9. Garanti og støtte

GDFStudio products are manufactured with quality and care. For any questions regarding assembly, missing parts, or product defects, please contact GDFStudio customer support. Please have your model number (326331W) and purchase information ready when contacting support.

For specific warranty details, please refer to the documentation provided at the time of purchase or visit the official GDFStudio webnettstedet.