1. Produktet er overview
The MMS Mini Excavator Ripper Attachment is a robust tool designed for breaking up compacted materials that are difficult to excavate manually. It is ideal for tasks involving hard soil, weathered rocks, and other challenging ground conditions. This attachment enhances the capabilities of mini excavators by providing strong excavation and cutting forces, making it an indispensable tool for various applications including farmland cultivation, landscaping, and construction project preparation.
Its design allows it to efficiently dig up cracked rock and compacted soil, shred trees, break up gravel, and remove cracked asphalt, addressing working environment problems that standard buckets cannot solve.
Figure 1: The MMS Mini Excavator Ripper Attachment, showcasing its robust design and single hook configuration.
2. Pakkens innhold
Upon unpacking, please verify that all components are present and undamaged. The package for the MMS Mini Excavator Ripper Attachment includes:
- 1 x MMS Mini Excavator Ripper Attachment
- 2 x Mini Excavator Pins
- 2 x Locking Nuts
If any items are missing or damaged, please contact MMS customer support immediately.
3. Spesifikasjoner
The following table details the key specifications of the MMS Mini Excavator Ripper Attachment:
| Trekk | Detalj |
|---|---|
| Modellnummer | MMS-Ripper |
| Materiale | High-quality Manganese Steel |
| Spenn Avstand | 90 mm / 3.54 tommer |
| Hulldiameter | 25 mm / 0.98 tommer |
| Center Wheelbase | 90 mm / 3.54 tommer |
| Pinnediameter | 25 mm / 0.98 tommer |
| Produktdimensjoner (L x B x H) | 16 x 5 x 5 tommer |
| Vekt | 32.7 pund (ca. 14.8 kg) |
| Kompatibilitet | Compatible with 0.8-1.8 Ton Mini Excavators |
Figure 2: Detailed dimensions of the ripper attachment, including length, height, and weight.
Figure 3: Diagram illustrating the pin diameter and span distance for proper attachment to an excavator.
4. Installasjon og oppsett
Proper installation is crucial for the safe and efficient operation of your MMS Mini Excavator Ripper Attachment. Always ensure your excavator is turned off and secured before beginning installation.
- Bekreft kompatibilitet: Before installation, confirm that the ripper's span distance (90 mm/3.54in), hole diameter (25 mm/0.98in), and center wheelbase (90 mm/3.54in) are compatible with your specific mini excavator model (0.8-1.8 Ton). A tolerance of 1-3 mm is acceptable.
- Position the Ripper: Carefully align the ripper attachment's mounting points with the excavator's arm linkage.
- Sett inn pinner: Insert the two provided mini excavator pins through the aligned holes. Ensure they pass completely through both the ripper and the excavator's linkage.
- Fest med muttere: Thread and tighten the two locking nuts onto the pins. Use appropriate tools to ensure they are securely fastened to prevent loosening during operation.
- Sluttsjekk: After installation, visually inspect all connections to ensure the ripper is firmly attached and there is no excessive play.
Figure 4: The ripper attachment securely mounted on a mini excavator, ready for operation.
5. Bruksanvisning
The MMS Mini Excavator Ripper is designed for high efficiency in challenging conditions. Always operate the attachment responsibly and safely.
5.1. Generell drift
- Førstegangsforlovelse: Position the ripper's tooth at the desired starting point for excavation. Apply downward pressure using the excavator's hydraulics.
- Ripping Motion: Use a controlled pulling or prying motion to break up compacted soil, rock, or other materials. The hard serrated teeth are designed to effortlessly pass through tough ground.
- Materialhåndtering: Once materials are loosened, the ripper can assist in moving or piling them, though a bucket may be more efficient for bulk material handling.
- Kontinuerlig drift: The robust design and manganese steel material ensure the ripper can withstand high-intensity continuous operations, reducing labor costs.
5.2. Søknader
The ripper's multifunctionality makes it suitable for a variety of tasks:
- Crushing Compacted Materials: Efficiently breaks up hard soil, weathered rocks, and other dense ground.
- Shredding Trees/Roots: Can be used to tear out stubborn roots and small trees.
- Breaking Up Gravel: Effective for loosening and preparing gravel surfaces.
- Removing Cracked Asphalt: Aids in the demolition and removal of damaged asphalt.
- Trench Filling: Can assist in breaking up soil for backfilling trenches.
- Housing Demolition: Useful for breaking smaller concrete or masonry elements.
- Slope Shaping: Helps in contouring and shaping terrain.
Figur 5: Eksamples of various applications for the ripper attachment, including trench filling, material handling, housing demolition, and slope shaping.
6. Vedlikehold og stell
Regular maintenance ensures the longevity and optimal performance of your MMS Mini Excavator Ripper Attachment.
- Rengjøring: After each use, clean the ripper to remove dirt, mud, and debris. This prevents material buildup and corrosion.
- Undersøkelse: Regularly inspect the ripper for signs of wear, cracks, or damage, especially on the tooth and welded areas. Pay close attention to the pins and nuts for any loosening.
- Smøring: Ensure all pivot points on your excavator's arm linkage are properly lubricated as per your excavator's manual. While the ripper itself has no moving parts requiring lubrication, proper excavator maintenance is key.
- Lagring: Store the ripper in a dry, protected area when not in use to prevent rust and environmental damage.
- Pin and Nut Check: Periodically check the tightness of the pins and locking nuts. Re-tighten if necessary to maintain a secure connection.
The high-quality manganese steel construction provides resistance to wear, corrosion, and deformation, contributing to an extended service life with proper care.
7. Feilsøking
This section addresses common issues you might encounter with the MMS Mini Excavator Ripper Attachment.
| Problem | Mulig årsak | Løsning |
|---|---|---|
| Ripper feels loose or wobbly after installation. | Pins or locking nuts are not fully tightened. | Ensure excavator is off and secured. Re-tighten the locking nuts firmly. Check for correct pin insertion. |
| Difficulty attaching the ripper to the excavator. | Incompatible specifications; misalignment; debris in pin holes. | Verify ripper specifications against excavator requirements. Clean pin holes. Adjust excavator arm for precise alignment. |
| Ripper not effectively breaking up material. | Insufficient hydraulic pressure from excavator; incorrect operating angle; excessive wear on ripper tooth. | Check excavator's hydraulic system. Adjust the angle of attack. Inspect the ripper tooth for significant wear; replacement may be necessary if severely worn. |
| Uvanlige lyder eller vibrasjoner under drift. | Loose attachment; damage to ripper or excavator linkage. | Immediately cease operation. Inspect all connections for tightness. Check the ripper and excavator arm for any visible damage or cracks. Do not operate if damage is found. |
For issues not listed here or if troubleshooting steps do not resolve the problem, please contact MMS customer support.
8. Garantiinformasjon
MMS stands behind the quality of its products. While specific warranty terms may vary, generally, MMS products are covered against defects in materials and workmanship under normal use. Please retain your proof of purchase for any warranty claims.
For detailed warranty information, including coverage period and terms, please refer to the warranty card included with your product or visit the official MMS webnettstedet.
9. Kundestøtte
Should you require assistance with your MMS Mini Excavator Ripper Attachment, our dedicated customer support team is available to help. For inquiries regarding product operation, maintenance, troubleshooting, or warranty claims, please contact us through the following channels:
- Online støtte: Visit the official MMS webnettsted for vanlige spørsmål, støtteressurser og kontaktskjemaer.
- E-poststøtte: Refer to your product packaging or the MMS webnettstedet for riktig e-postadresse for støtte.
- Telefonstøtte: Contact numbers for regional support may be found on the MMS webnettstedet.
When contacting support, please have your product model number (MMS-Ripper) and purchase details readily available to expedite assistance.
