Introduksjon
Thank you for choosing the Olvy Carpet and Upholstery Spot Cleaner. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your device. Please read it thoroughly before first use and keep it for future reference.
This 3-in-1 cleaner is designed for effective spot cleaning, combining vacuuming, scrubbing, and spraying functions to tackle tough stains on various surfaces.
Image: The Olvy Spot Cleaner demonstrating its 3-in-1 functionality with a user interacting with the control panel.
Sikkerhetsinformasjon
- Koble alltid apparatet fra strømforsyningen før rengjøring eller vedlikehold.
- Ikke senk apparatet i vann eller andre væsker.
- Hold hender, hår og løse klær unna bevegelige deler.
- Ikke bruk apparatet til å suge opp brennbare eller lettantennelige væsker, eller noe som brenner eller ryker.
- Use only Olvy cleaning solutions or recommended alternatives.
- Sørg for at alle tanker er ordentlig sikret før bruk.
- Supervise children and individuals with reduced capabilities when near the appliance.
Pakkeinnhold
Bekreft at alle varene er til stede i pakken:
- Olvy Spot Cleaner Main Unit
- Flexible Hose with Integrated Brush Head
- Clean Water Tank (2000 ml capacity)
- Skittenvannstank (1400 ml kapasitet)
- Olvy Spot & Stain Remover (600ml bottle)
- Strømledning (5 m lengde)
Image: The Olvy Spot Cleaner shown with the included cleaning solution and visible water tanks.
Produktfunksjoner
- Kraftig sug: 15,000 Pa for effective liquid extraction.
- Stor tankkapasitet: 2000 ml clean water tank and 1400 ml dirty water tank.
- Allsidig rengjøring: Suitable for carpets, car upholstery, stairs, sofas, and other fabric surfaces.
- Doble rengjøringsmoduser: Normal and Turbo modes for varying cleaning needs.
- Integrated Brush and Spray: Brush head with automatic and even water distribution for deep cleaning.
- Self-Cleaning Hose: Designed to prevent residue buildup and maintain hygiene.
- High Water Extraction: Extracts up to 98% of applied water directly.
Image: Demonstrating the versatility of the Olvy Spot Cleaner on various surfaces.
Oppsett
- Pakke ut: Fjern forsiktig alle komponenter fra emballasjen.
- Fyll rentvannstanken: Remove the clean water tank. Fill it with warm water (max 40°C) up to the MAX line. Add 1/8 part of Olvy Spot & Stain Remover to the water. Securely reattach the tank to the main unit.
- Fest slange: Connect the flexible hose to the designated port on the main unit until it clicks into place.
- Posisjonsenhet: Place the unit on a stable, flat surface near the area to be cleaned.
- Plugg inn: Sett strømledningen inn i en passende stikkontakt.
Image: The Olvy Spot Cleaner with its hose and brush head stored, illustrating its compact design for easy storage.
Bruksanvisning
- Pre-test: Before cleaning, test the solution on an inconspicuous area of the fabric for colorfastness.
- Strøm på: Press the power button on the main unit to turn on the cleaner.
- Velg modus: Choose between Normal or Turbo mode depending on the severity of the stain. Turbo mode provides stronger suction.
- Spray og skrubb: Hold the brush head over the stained area. Press the spray trigger on the handle to release cleaning solution. Gently scrub the stain with the brush head.
- Utdrag: Release the spray trigger and continue to move the brush head over the wet area to vacuum up the dirty solution. The powerful suction will extract up to 98% of the water.
- Gjenta: Repeat the spray, scrub, and extract steps until the stain is removed and the extracted water appears clean.
- Tøm skittenvannstanken: Overvåk skittenvannstanken. Tøm den når den når MAX-påfyllingslinjen eller etter hver rengjøring.
Bilde: Detaljert view of the brush head, illustrating its combined spray and scrub functionality.
Vedlikehold
- Tøm og rengjør skittenvannstanken: Etter hver bruk, fjern skittenvannstanken, tøm innholdet og skyll den grundig med rent vann. La den lufttørke før du setter den på igjen.
- Rengjør ren vanntank: Skyll den rene vanntanken hvis det er igjen løsning eller før oppbevaring.
- Self-Cleaning Hose: The hose features a self-cleaning function. After use, run clean water through the hose by spraying into a sink or bucket while the suction is active. This helps prevent blockages and odors.
- Rengjør børstehodet: Remove any debris or hair from the brush head. Rinse it under running water.
- Tørk av enheten: Tørk av utsiden av hovedenheten med annonseamp klut.
- Lagring: Store the cleaner in a dry place. The hose and brush head can be neatly stored on the unit for compact storage.
Feilsøking
| Problem | Mulig årsak | Løsning |
|---|---|---|
| No spray from brush head | Clean water tank empty; spray nozzle clogged; pump malfunction. | Refill clean water tank; clean spray nozzle with a small brush; contact customer support if pump issue persists. |
| Lav sugekraft | Dirty water tank full; hose/nozzle clogged; tank not properly sealed. | Empty dirty water tank; clear any blockages in hose/nozzle; ensure tanks are securely attached. |
| Vann lekker fra enheten | Tanks not properly seated; seals damaged; unit damaged. | Ensure both clean and dirty water tanks are correctly and firmly seated; check seals for damage and replace if necessary; if damage to unit, contact customer support. |
| Enheten slår seg ikke på | No power; power cord damaged; internal fault. | Check power outlet; inspect power cord for damage; contact customer support. |
Spesifikasjoner
- Merke: Olvy
- Modellnummer: B-PRO12
- Farge: Svart
- Strømkilde: Elektrisk med ledning
- Sugekraft: 15,000 Pa
- Renvannstankkapasitet: 2000 ml
- Kapasitet på tanken for skittent vann: 1400 ml
- Ledningslengde: 5 meter
- Slangelengde: 1.5 meter
- Dato først tilgjengelig: 11. januar 2024
Garanti og støtte
For warranty information, product support, or to purchase replacement parts, please refer to the official Olvy website or contact Olvy customer service directly. Contact details can typically be found on the product packaging or the brand's official online presence.
