Introduksjon
This instruction manual provides essential information for the safe and efficient use of your tectake Electric Height Adjustable Desk Stand, Model 404315. This versatile desk stand is designed to offer a smooth transition between sitting and standing positions, promoting a healthier work environment. It features a sturdy metal frame, an electric height adjustment mechanism, and an intelligent anti-collision system for enhanced safety.
Please read this manual thoroughly before assembly and operation to ensure proper installation and to maximize the lifespan of your product.
Sikkerhetsadvarsler
Unnlatelse av å følge disse sikkerhetsinstruksjonene kan føre til personskade eller skade på produktet.
- Ensure the desk stand is properly assembled according to the provided instructions.
- Do not exceed the maximum weight limit of 100 kg (220 lbs) on the desk stand.
- Exercise caution with sharp edges during assembly and handling.
- Properly adjust the height-adjustable plastic feet to ensure the desk's stability on uneven surfaces.
- Avoid touching electrical components or motors during operation.
- Ensure the desktop is firmly grounded to prevent electrical hazards.
- Hold barn og kjæledyr unna skrivebordet under høydejustering.
Pakkeinnhold
Kontroller at alle komponenter er til stede før monteringen starter. Hvis noen deler mangler eller er skadet, vennligst kontakt kundestøtte.
- Electric Height Adjustable Desk Stand Frame
- Mounting Material (screws, tools, etc.)
- Monteringsveiledning
Note: A tabletop is not included with this desk stand and must be purchased separately.
Oppsett og montering
Follow the detailed assembly instructions provided in the package. The general steps are outlined below:
- Pakk ut komponenter: Ta forsiktig alle delene ut av emballasjen og legg dem på en ren, myk overflate for å unngå riper.
- Sett sammen ramme: Connect the lifting columns, crossbars, and feet according to the assembly manual. Ensure all screws are tightened securely.
- Fest bordplaten: Place your chosen tabletop onto the assembled frame. Secure the tabletop to the frame using the provided mounting hardware. Ensure the tabletop is centered and stable.
- Koble til strøm: Plug the power cable into the control box, and then plug the control box into a standard electrical outlet. Ensure the cable is routed safely to avoid tripping hazards.
- Juster føtter: Level the desk by adjusting the plastic feet at the bottom of the stand. This ensures stability and prevents wobbling.
Image: An assembled tectake electric height adjustable desk stand in grey, ready for use. This image illustrates the sturdy metal frame and the overall structure of the product.
Bruksanvisning
Your tectake Electric Height Adjustable Desk Stand is designed for intuitive operation.
- Høydejustering: Use the control panel (usually located on the front edge of the tabletop) to raise or lower the desk. Typically, there are 'Up' and 'Down' buttons. Press and hold the desired button until the desk reaches your preferred height. The electric motor operates quietly and smoothly.
- Antikollisjonssystem: The desk stand is equipped with an intelligent anti-collision system. If the desk encounters an obstacle (e.g., a chair, cabinet, or wall) during height adjustment, the motor will automatically stop and slightly reverse direction to prevent damage.
- Minneforhåndsinnstillinger (hvis aktuelt): Some models may include memory preset buttons. Refer to your specific control panel instructions for programming and using these presets to save your favorite sitting and standing heights.
Regularly changing between sitting and standing positions can help reduce strain and improve comfort during long working hours.
Vedlikehold
Proper maintenance ensures the longevity and optimal performance of your desk stand.
- Rengjøring: Wipe the metal frame and tabletop (if applicable) with a soft, damp klut. Unngå å bruke slipende rengjøringsmidler eller løsemidler som kan skade overflaten.
- Sjekk tilkoblinger: Periodically inspect all screws and bolts to ensure they remain tight. Re-tighten if necessary.
- Kabeladministrasjon: Ensure all power cables are neatly organized and not pinched or strained.
- Vektgrense: Always adhere to the maximum load capacity of 100 kg. Overloading can damage the motor and frame.
Feilsøking
If you encounter any issues with your desk stand, refer to the following common solutions:
| Problem | Mulig årsak | Løsning |
|---|---|---|
| Skrivebordet beveger seg ikke. | Strømkabel frakoblet, motoroverbelastning, problem med kontrollpanelet. | Check power connections. Unplug and replug the power cord. Reduce load if overloaded. Contact support if problem persists. |
| Antikollisjonssystemet utløses ofte. | Obstruction, sensitive setting. | Ensure no objects are in the path of the desk. Refer to control panel manual for sensitivity adjustment (if available). |
| Uvanlig støy under drift. | Løse komponenter, motorproblem. | Check all screws and bolts for tightness. Ensure the desk is level. If noise persists, contact customer support. |
| Skrivebordet vingler. | Uneven floor, loose connections. | Adjust the leveling feet at the bottom of the stand. Ensure all frame connections are tight. |
Spesifikasjoner
Key technical details for the tectake Electric Height Adjustable Desk Stand, Model 404315:
- Modellnummer: 404315
- Maximum Total Dimensions (WxDxH): Omtrent 168 x 60 x 125 cm
- Minimum Total Dimensions (WxDxH): Omtrent 110 x 60 x 60 cm
- Suitable for Table Tops (WxD): Approximately 120 x 60 cm to 180 x 80 cm
- Lifting Columns per Side: 3
- Main Column (WxD): Omtrent 5 x 8 cm
- Table Top Support (WxD): Omtrent 3 x 58 cm
- Adjustable Area of Plastic Feet: Ca 1.2 cm
- Sound from Electric Motors: <50 dB
- Løftehastighet: 25 mm/s
- Power per Motor: 52.2 W
- Inngang Voltage: 100-240 V
- Kabellengde: Ca 150 cm
- Lastekapasitet: 100 kg
- Vekt: Omtrent 23 kg
- Materiale: Pulverlakkert stål, ABS-plast
Garanti og støtte
For warranty information, please refer to the documentation included with your purchase or visit the official tectake website. If you require technical assistance, have questions about assembly, or need to report a missing/damaged part, please contact tectake customer support directly. Contact details can typically be found on the manufacturer's webnettstedet eller i kjøpsdokumentasjonen.
Ha modellnummeret (404315) og kjøpsdatoen tilgjengelig når du kontakter kundestøtte.
