NERF Elite 2.0 Loadout 3-Blaster Pack Instruction Manual

1. Introduksjon

This manual provides essential information for the safe and effective use of your NERF Elite 2.0 Loadout 3-Blaster Pack. This pack includes three distinct blasters: the Technician DS-2, the Quadfire QS-4, and the Ace SD-1, along with 14 Official Nerf Elite foam darts. Please read all instructions carefully before use.

2. Sikkerhetsinformasjon

WARNING: TO AVOID EYE INJURY.

• Ikke sikt mot øyne eller ansikt.
• Use of eyewear is recommended for players and people within range.
• Use only official Nerf darts. Other darts may not meet safety standards.
• Ikke modifiser dart eller blaster.

WARNING: CHOKING HAZARD - Small parts may be generated. Not for children under 3 years.

3. Hva er inkludert

• 1x Technician DS-2 Blaster
• 1x Quadfire QS-4 Blaster
• 1x Ace SD-1 Blaster
• 14x Official Nerf Elite Foam Darts

Image: The NERF Elite 2.0 Loadout 3-Blaster Pack as it appears in its retail packaging.

4. Blaster Overview og Oppsett

4.1 Technician DS-2 Blaster

The Technician DS-2 is a pump-action blaster with a 2-dart capacity. It fires one dart at a time. It features a tactical rail and a stock attachment point for customization (stock not included).

Bilde: Detaljert view of the Technician DS-2 blaster, highlighting its design and grip.

Loading and Priming:

1. Insert up to two Official Nerf Elite darts into the barrels at the front of the blaster.
2. To prime, pull the pump-action handle fully back, then push it fully forward until it clicks into place.

4.2 Quadfire QS-4 Blaster

The Quadfire QS-4 blaster has a 4-dart capacity, allowing you to unleash four darts in a row. It features a pull-back priming handle and a targeting sight for improved aim.

Image: The complete 3-blaster pack, including the Quadfire QS-4 (bottom left).

Loading and Priming:

1. Insert up to four Official Nerf Elite darts into the barrels at the front of the blaster.
2. To prime, pull the handle at the back of the blaster fully back until it clicks.

4.3 Ace SD-1 Blaster

The Ace SD-1 blaster is a compact blaster that launches one dart. It features a pull-down priming handle and a targeting sight that also serves as onboard storage for one dart.

Image: The back of the product box, illustrating the features of the Ace SD-1 (bottom left) and other blasters.

Loading and Priming:

1. Insert one Official Nerf Elite dart into the barrel at the front of the blaster.
2. To prime, pull the handle below the barrel fully down until it clicks.
3. The targeting sight on top can store one extra dart.

5. Bruksanvisning

1. Last inn dartpiler: Follow the loading instructions for each specific blaster.
2. Prime Blaster: Follow the priming instructions for each specific blaster.
3. Mål: Use the integrated targeting sights on the blasters to aim at your target. Remember to wear protective eyewear.
4. Ild: Pull the trigger to launch a dart.
5. Last på nytt: After firing, reload and re-prime your blaster as needed.

6. Vedlikehold

• Keep blasters clean and free from dirt or debris.
• Store darts in a dry place to maintain their shape and performance.
• Do not expose blasters to extreme temperatures or direct sunlight for extended periods.
• Inspect blasters and darts regularly for any damage. Discontinue use if damaged.

7. Feilsøking

• Dart Jam: If a dart gets stuck, ensure the blaster is unprimed, then carefully remove the dart from the barrel or loading area. Do not force the priming mechanism.
• Darts Not Firing Properly: Ensure darts are Official Nerf Elite darts and are not damaged or bent. Make sure the blaster is fully primed before firing.

8. Spesifikasjoner

9. Garanti og støtte

For warranty information or customer support, please refer to the official Nerf or Hasbro website, or contact their customer service directly. Keep your proof of purchase for any warranty claims.