Håndbøker+

Lepro PR410082-RGB-JP

Lepro 5m RGB LED Strip Light Instruction Manual

Model: PR410082-RGB-JP

Introduksjon

Thank you for choosing the Lepro 5m RGB LED Strip Light. This product is designed to provide versatile and vibrant lighting for various indoor applications. Featuring high-brightness SMD5050 LEDs, a wide range of colors, and easy installation, it enhances the ambiance of any space. Please read this manual carefully before installation and use to ensure proper operation and safety.

Hva er i esken

Kontroller at alle komponenter er til stede før installasjonen starter:

  • LED Strip Light (5 meters) x 1
  • DC12V Power Adapter x 1
  • Connection Receiver x 1
  • Fjernkontroll x 1
  • Instruction Manual (Japanese) x 1
Contents of the Lepro 5m RGB LED Strip Light package
Image: Package contents including the LED strip, power adapter, receiver, and remote control.

Sikkerhetsinformasjon

  • Dette produktet er designet for kun innendørs bruk. Do not expose to water or high humidity.
  • Sørg for at strømforsyningen er frakoblet før installasjon eller vedlikehold.
  • Use only the provided DC12V power adapter. Using an incompatible power supply may damage the product or pose a fire hazard.
  • Do not bend the LED strip sharply or apply excessive force, as this may damage the circuit.
  • Oppbevares utilgjengelig for barn.
  • If any part of the product is damaged, discontinue use immediately and contact support.

Oppsett

Følg disse trinnene for riktig installasjon av LED-stripen din:

  1. Klargjør overflaten: Clean the desired installation surface thoroughly. Ensure it is dry, smooth, and free of dust or oil for optimal adhesive performance.
  2. Mål og kutt (valgfritt): If a shorter length is required, cut the LED strip along the designated cut marks (indicated by a scissor icon) using scissors. Note: Only cut at these specific marks. Cutting elsewhere will damage the strip. Cut sections cannot be reconnected without additional connectors (sold separately).
  3. Påfør stripen: Peel off the backing from the 3M adhesive tape on the back of the LED strip. Carefully press the strip onto the cleaned surface, ensuring firm contact along its entire length.
  4. Koble til komponenter: Connect the LED strip to the connection receiver, ensuring the arrows on both components align. Then, connect the DC12V power adapter to the receiver.
  5. Strøm på: Plug the power adapter into a suitable power outlet. Remove the insulation sheet from the remote control before first use. Point the remote control towards the receiver and press the power button to turn on the lights.
Step-by-step installation guide for the LED strip light
Image: Visual guide showing how to stick, cut, connect, and power on the LED strip.
Close-up of the 3M adhesive tape on the LED strip
Image: The strong 3M double-sided adhesive tape for secure mounting.
LED strip showing cut marks for customization
Image: The LED strip can be cut at designated marks to fit your desired length.
Video: A demonstration of the LED strip light in various indoor settings, showcasing its versatility and color-changing capabilities.

Bruksanvisning

The LED strip light is controlled using the included 44-key remote control. Ensure the remote is pointed towards the receiver for effective operation.

Fjernkontrollfunksjoner:

Diagram of the 44-key remote control for the LED strip light
Image: Layout of the 44-key remote control with labeled functions.
  • Slå på/av: Trykk på rød av/på-knapp for å slå lysene av eller på.
  • Justering av lysstyrke: Bruk opp og ned pilknapper (labeled 'Brightness Adjust') to increase or decrease the light intensity.
  • Fargevalg: Velg mellom 20 forhåndsinnstilte farger by pressing the corresponding color buttons.
  • DIY-moduser: De DIY1-DIY6 buttons allow you to create and save custom colors by adjusting the Red, Green, and Blue intensity using the RGB arrow buttons.
  • Dynamiske moduser:
    • RASK/SLEGT: Juster hastigheten på dynamiske moduser.
    • BIL: Cycles through all dynamic modes automatically.
    • BLITS: Flashes through colors.
    • JUMP3/JUMP7: Jumps between 3 or 7 colors.
    • FADE3/FADE7: Fades between 3 or 7 colors.
Video: A demonstration of the remote control in action, showing how to change colors and modes for the LED strip light.

Vedlikehold

  • Rengjøring: Ensure the power is off and unplugged before cleaning. Gently wipe the LED strip with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
  • Lagring: If storing the strip for an extended period, ensure it is clean and dry. Roll it loosely to prevent damage to the LEDs or circuit. Store in a cool, dry place away from direct sunlight.
  • Klebemiddelpleie: The 3M adhesive is strong, but repeated removal and reapplication may reduce its effectiveness.

Feilsøking

ProblemMulig årsakLøsning
LED-stripen lyser ikke.1. Power adapter not plugged in.
2. Remote control insulation sheet not removed.
3. Connections are loose or incorrect.
4. Remote control battery is dead.		1. Ensure power adapter is securely plugged into an outlet.
2. Remove the clear plastic insulation sheet from the remote control battery compartment.
3. Check all connections, ensuring arrows align between the strip and receiver.
4. Replace the remote control battery (CR2025 or equivalent).
Fjernkontrollen svarer ikke.1. Remote not pointed at receiver.
2. Obstruction between remote and receiver.
3. Remote control battery is dead.		1. Point the remote directly at the receiver.
2. Remove any objects blocking the line of sight.
3. Bytt batteri i fjernkontrollen.
Some sections of the strip are not lighting up.1. Damage to the LED strip.
2. Incorrect cutting.		1. Inspect the strip for physical damage. If damaged, contact support.
2. Ensure cuts were made only at designated marks.

Spesifikasjoner

  • Modellnummer: PR410082-RGB-JP
  • Merke: Lepro
  • Lyskildetype: LED (SMD5050)
  • LED-mengde: 150 LED-lys (30 LED-lys per meter)
  • Striplengde: 5 meter
  • Strømforbruk: 18W
  • Inngang Voltage: DC12V 1.5A
  • Fargealternativer: RGB (20 preset colors + DIY modes)
  • Kontrollmetode: 44-key IR Remote Control
  • Innendørs/utendørs bruk: Innendørs
  • Spesielle funksjoner: Dimmable, Cuttable, 3M Adhesive, PSE Certified
  • Pakkestørrelse: 13.1 x 10.7 x 6.7 cm; 230 g
Comparison of LED density: Lepro 30 LEDs/M vs. others 12 LEDs/M
Image: Illustrates the higher LED density of Lepro strips (30 LEDs/meter) compared to others (12 LEDs/meter) for brighter illumination.

Garanti og støtte

This Lepro LED Strip Light comes with a 2 års garanti. If you encounter any issues or have questions regarding the product, please contact Lepro JP customer support through the retailer's platform. Provide your order details and a description of the issue for prompt assistance.

For further assistance, you can visit the official Lepro store on Amazon: Lepro Amazon Store