Artemide La Petite Floor Lamp Model 1753028A User Manual

1. Introduksjon

This manual provides essential instructions for the safe and efficient use of your Artemide La Petite Floor Lamp, Model 1753028A. The La Petite lamp features an archetypal lampshade balanced on a tilted stem, showcasing a geometric design with advanced materials. Please read this manual thoroughly before assembly and operation, and retain it for future reference.

2. Sikkerhetsinstruksjoner

• Ensure the power supply is disconnected before assembly, cleaning, or bulb replacement.
• Denne lamp er kun beregnet for innendørs bruk. Må ikke utsettes for fuktighet eller ekstreme temperaturer.
• Use only LED-T (Non Integrated) E26/A19 bulbs with a maximum power of 12W. Using incorrect bulb types or wattages may damage the lamp eller utgjøre en brannfare.
• Ikke modifiser lamp or its components. Any modifications will void the warranty and may compromise safety.
• Behold lamp vekk fra brennbare materialer.
• Hvis den eksterne fleksible kabelen eller ledningen til denne armaturen er skadet, skal den utelukkende erstattes av produsenten eller hans serviceagent eller en lignende kvalifisert person for å unngå fare.

3. Pakkens innhold

Kontroller at alle komponenter er til stede og uskadet før du fortsetter med monteringen.

• Lamp Base
• Lamp Stem (tilted)
• Lampshade (technopolymer)
• Diffuser (polycarbonate)
• Power Cord with On/Off Switch
• Assembly Hardware (if applicable)

Figure 1: Artemide La Petite Floor Lamp (representative model)

4. Oppsett og montering

Follow these steps to assemble your La Petite Floor Lamp:

1. Pakk alle komponentene forsiktig ut av emballasjen.
2. Fest lamp stem to the lamp base. Ensure it is securely fastened according to the provided hardware (if any).
3. Monter lampshade onto the top of the stem. The lampshade is made of lightweight technopolymer and should fit snugly.
4. Insert the polycarbonate diffuser into the lampskygge.
5. Screw in an E26/A19 LED-T bulb (max 12W) into the lamp holder. Ikke stram for mye.
6. Plasser lamp på en stabil, jevn overflate.
7. Koble strømledningen til en standard 120V stikkontakt.

5. Bruksanvisning

The Artemide La Petite Floor Lamp is equipped with an on/off switch located on the power cord.

• For å snu lamp ON, locate the switch on the power cord and toggle it to the 'ON' position.
• For å snu lamp AV, toggle the switch to the 'OFF' position.

6. Vedlikehold

Rengjøring

• Koble alltid fra lamp fra strømforsyningen før rengjøring.
• Tørk av lamp base, stem, and shade with a soft, dry, or slightly damp klut.
• Ikke bruk slipende rengjøringsmidler, løsemidler eller sterke kjemikalier, da disse kan skade overflaten.

Bytte av pære

• Sørg for at lamp is unplugged and the bulb has cooled completely before attempting to replace it.
• Carefully unscrew the old bulb from the E26 socket.
• Screw in a new E26/A19 LED-T bulb (max 12W).
• Kast gamle pærer i henhold til lokale forskrifter.

7. Feilsøking

8. Spesifikasjoner

9. Garanti og støtte

Artemide products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official Artemide website. For technical support, replacement parts, or service inquiries, please contact Artemide customer service through their official channels.

Webnettsted: www.artemide.com