Pxwaxpy 26800mAh Solar Power Bank

Introduksjon

Thank you for choosing the Pxwaxpy 26800mAh Solar Power Bank. This portable charger is designed to provide reliable power for your mobile devices, especially during outdoor activities. Featuring a high-capacity Li-Polymer battery, multiple input and output options, and a solar charging panel for emergency use, it is an ideal companion for travel and daily use.

Image: The Pxwaxpy 26800mAh Solar Power Bank, showcasing its solar panel and compact design.

Produktfunksjoner

• Høy kapasitet: 26800mAh Li-Polymer battery, capable of charging smartphones approximately 5 times and tablets approximately 3 times.
• Emergency Solar Charging: Built-in solar panel for emergency power replenishment when conventional power sources are unavailable. Note: Solar charging is supplementary and slower than wall charging.
• Allsidige innganger: Equipped with Micro USB, Type-C, and Solar input options for flexible recharging.
• Doble utganger: Two USB output ports (5V 2A / 5V 2.1A) allow for simultaneous charging of two devices.
• LED-indikatorer: Four LED indicators display the remaining battery capacity (0-25%, 26-50%, 51-75%, 76-100%).
• Sikkerhetsbeskyttelse: Integrated smart chips provide overcurrent, overvoltage, overdischarge, and short-circuit protection.

Bilde: En eksplodert view illustrating the internal components and various safety protections of the power bank, including overcurrent, overvoltage, overdischarge, and short-circuit protection.

Oppsett

1. Innledende kostnad: Before first use, fully charge the power bank using a wall adapter (not included) and the provided Micro USB cable or a Type-C cable. This ensures optimal battery performance.
2. Koble til enheter: Use your device's original charging cable or a certified cable to connect it to one of the USB output ports on the power bank.

Image: The power bank highlighting its three input methods: solar charging, Micro USB, and Type-C, demonstrating how to connect it to a wall adapter for faster charging.

Bruksanvisning

Lader Power Bank

• Via Wall Adapter (Recommended): Connect the power bank to a wall charger using a Micro USB or Type-C cable. The LED indicators will light up to show charging progress. All four LEDs will be solid when fully charged.
• Via solcellepanel: Place the power bank in direct sunlight. The solar panel will absorb light and convert it into electricity. This method is primarily for emergency use and is significantly slower than wall charging. The first LED indicator will flash green when solar charging is active.

Lader enhetene dine

• Connect your device to one of the USB output ports (5V 2A or 5V 2.1A) using a compatible USB cable.
• Press the power button on the side of the power bank to initiate charging. The LED indicators will illuminate to show the power bank's remaining charge.
• The power bank will automatically detect and deliver the optimal charging current for your device.

Forstå LED-indikatorer

Press the power button to check the battery level:

• 1 LED-lys fast: 0-25 % kapasitet
• 2 LED-er lyser kontinuerlig: 26-50 % kapasitet
• 3 LED-er lyser kontinuerlig: 51-75 % kapasitet
• 4 LED-er lyser kontinuerlig: 76-100 % kapasitet

Image: A close-up of the power bank's 4 LED indicators, detailing how each lit LED corresponds to a specific battery capacity range (0-25%, 26-50%, 51-75%, 76-100%).

Image: The power bank simultaneously charging a tablet and a smartphone, demonstrating its dual USB output capability for charging two devices at once.

Vedlikehold

• Keep the power bank away from extreme temperatures (hot or cold), direct sunlight for prolonged periods (except for solar charging), and humid environments.
• Unngå å miste eller utsett kraftbanken for kraftige støt.
• Rengjør overflaten med en myk, tørr klut. Ikke bruk sterke kjemikalier eller slipende materialer.
• For long-term storage, charge the power bank to about 50-75% capacity every 3 months to preserve battery life.

Feilsøking

• Powerbanken lader ikke: Ensure the charging cable is securely connected to both the power bank and the power source. Try a different cable or wall adapter.
• Enheten lader ikke fra powerbanken: Press the power button on the power bank. Ensure your device's charging cable is properly connected to the power bank's output port. Check if the power bank has sufficient charge (refer to LED indicators).
• Sakte lading: Ensure you are using a high-quality cable and a wall adapter with sufficient output (e.g., 5V/2A). Solar charging is inherently slower and intended for emergency use.
• Power bank automatically turns off: This may indicate low battery. Recharge the power bank.

Spesifikasjoner

Garanti og støtte

This Pxwaxpy product comes with a 24 måneders ettersalgsservice fra kjøpsdatoen. Denne garantien dekker produksjonsfeil og problemer som oppstår ved normal bruk.

If you have any questions, concerns, or require assistance with your product, please do not hesitate to contact our customer support team. We are committed to providing excellent service and support.

Se kjøpsdokumentasjonen eller forhandlerens webnettstedet for spesifikk kontaktinformasjon.