Graco Ultra Max II 495 PC Pro Electric Airless Paint Sprayer (Model 17E857) Instruction Manual

1. Viktig sikkerhetsinformasjon

ADVARSEL: Failure to follow these safety instructions could result in serious injury or death. Always read and understand the full manual before operating the sprayer.

• Sørg for riktig elektrisk jording.
• Avoid contact with pressurized liquids.
• Use appropriate personal protective equipment (PPE) when handling chemicals, including eye protection, gloves, and respiratory protection.
• Maintain the device as instructed to prevent mechanical failure or injury.
• Never point the spray gun at yourself or others.
• Always relieve pressure before cleaning, servicing, or storing the unit.

2. Produktet er overview

The Graco Ultra Max II 495 PC Pro is a professional-grade electric airless paint sprayer designed for high-performance painting applications. This Hi-Boy model offers enhanced portability and stability for various job sites.

Figure 1: Graco Ultra Max II 495 PC Pro Electric Airless Paint Sprayer. This image shows the complete sprayer unit, including the main pump, motor, hose, and spray gun, set up for operation.

Nøkkelfunksjoner:

• SmartControl 3.0: Monitors performance, adjusts motor speed, measures sprayer gallons, hours, and pressure, and provides diagnostic support.
• BlueLink Job and Sprayer Management System: Enables tracking of sprayer usage, job progress, and maximizes uptime.
• MaxPower Brushless DC Motor: Delivers high torque and maintenance-free performance.
• FastFlush High-Flow Cleaning System: Allows for 4X faster cleaning with half the water.
• Hi-Boy Design: Provides easy transport and stability with a kickstand for convenient bucket changes.

3. Oppsett og montering

Before operating your Graco Ultra Max II 495 PC Pro, ensure all components are correctly assembled and connected.

3.1 Utpakking og inspeksjon

• Fjern forsiktig alle komponenter fra emballasjen.
• Inspiser for eventuelle fraktskader. Kontakt forhandleren din umiddelbart hvis det oppdages skade.
• Kontroller at alle delene som er oppført i pakkelisten er til stede.

3.2 Assembly (Hi-Boy Model)

1. Attach the handle to the main unit using the provided hardware.
2. Secure the hose and spray gun to the designated connections. Ensure all connections are tight to prevent leaks.
3. Position the unit on a stable, level surface. The Hi-Boy design includes a kickstand for stability during bucket changes.

3.3 Koble til strøm

• Connect the power cord to a properly grounded electrical outlet. Refer to local electrical codes for requirements.
• Ensure the power switch on the sprayer is in the "OFF" position before connecting to power.

3.4 Priming av sprøyten

1. Plasser sugerøret i malingsbeholderen.
2. Turn the prime valve to the "PRIME" position.
3. Turn on the sprayer. Allow the unit to run until paint flows smoothly from the prime hose, indicating air has been purged from the system.
4. Turn off the sprayer and return the prime valve to the "SPRAY" position.

4. Bruksanvisning

Proper operation ensures efficient and consistent paint application.

4.1 SmartControl 3.0 System

The SmartControl 3.0 system continuously monitors the sprayer's performance and adjusts the motor speed to match your spraying needs. This ensures a consistent spray pattern and finish. The display provides real-time information on:

• Sprayer gallons used
• Driftstider
• Current pressure settings
• Diagnostic support messages

4.2 BlueLink Job and Sprayer Management System

Utilize the BlueLink system to track your sprayer's activity and manage job progress. This feature helps maximize uptime by providing insights into usage and maintenance schedules.

4.3 Sprøyteteknikk

1. Hold sprøytepistolen vinkelrett på overflaten, og hold en jevn avstand (vanligvis 10–12 cm).
2. Begin moving your arm before pulling the trigger and release the trigger before stopping your arm movement.
3. Overlapp hver omgang med omtrent 50 % for å sikre jevn dekning.
4. Adjust pressure settings on the SmartControl 3.0 as needed for different materials and desired finishes.

5. Vedlikehold og rengjøring

Regular maintenance and thorough cleaning are essential for extending the life of your Graco Ultra Max II 495 PC Pro and ensuring optimal performance.

5.1 FastFlush High-Flow Cleaning System

The FastFlush system allows for quick and efficient cleaning. Follow these steps:

1. Relieve pressure from the system.
2. Remove the suction tube from the paint and place it into a bucket of appropriate cleaning solution (water for latex, mineral spirits for oil-based paints).
3. Turn the prime valve to the "CLEAN" or "FLUSH" position (refer to specific model instructions for exact valve position).
4. Turn on the sprayer and allow the cleaning solution to circulate until it runs clear from the prime hose and spray gun.
5. Turn off the sprayer and relieve pressure.
6. Remove and clean the spray tip and guard separately.

5.2 Generelt vedlikehold

• Inspect hoses and connections regularly for wear or damage. Replace as needed.
• Check the spray tip for wear. A worn tip will result in a poor spray pattern and increased material consumption.
• The MaxPower Brushless DC Motor is designed for maintenance-free performance, but ensure it remains free of debris.
• Store the sprayer in a clean, dry environment, protected from freezing temperatures.

6. Feilsøking

This section provides solutions to common issues you may encounter during operation. For more complex problems, consult the full Graco service manual or contact customer support.

The SmartControl 3.0 display may also provide specific diagnostic codes or messages to assist in troubleshooting.

7. Spesifikasjoner

8. Garanti og kundestøtte

For detailed warranty information, please refer to the documentation included with your product or visit the official Graco website. Graco provides comprehensive customer support for all its products.

If you require assistance with setup, operation, maintenance, or troubleshooting beyond the scope of this manual, please contact Graco Customer Support directly. Contact information can typically be found on the product packaging or the manufacturer's webnettstedet.